Nissan Leaf. Manual — part 1061
SEC-6
< PRECAUTION >
[WITH INTELLIGENT KEY SYSTEM]
PRECAUTIONS
If the timer air conditioner or timer charge (during EVSE connection) is set, the high voltage system starts
automatically even when the power switch is in OFF state.
PREPARATION
SEC-7
< PREPARATION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
PREPARATION
PREPARATION
Special Service Tools
INFOID:0000000010119226
The actual shape of the tools may differ from those illustrated here.
Commercial Service Tools
INFOID:0000000010119227
Tool number
(TechMate No.)
Tool name
Description
—
(J-46534)
Trim Tool Set
Removing trim components
AWJIA0483ZZ
(TechMate No.)
Tool name
Description
Insulated gloves
[Guaranteed insulation
performance for 1000V/
300A]
Removing and installing high voltage com-
ponents
Leather gloves
[Use leather gloves that
can fasten the wrist tight]
• Removing and installing high voltage
components
• Protect insulated gloves
Insulated safety shoes
Removing and installing high voltage com-
ponents
Safety glasses
[ANSI Z87.1]
• Removing and installing high voltage
components
• To protect eye from the spatter on the
work to electric line
JMCIA0149ZZ
JPCIA0066ZZ
JPCIA0011ZZ
JPCIA0012ZZ
SEC-8
< PREPARATION >
[WITH INTELLIGENT KEY SYSTEM]
PREPARATION
Face shield
• Removing and installing high voltage
components
• To protect eye from the spatter on the
work to electric line
Insulated helmet
Removing and installing high voltage com-
ponents
Power tool
Loosening nuts, screws and bolts
(TechMate No.)
Tool name
Description
JPCIA0167ZZ
JPCIA0013ZZ
PIIB1407E
COMPONENT PARTS
SEC-9
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts Location
INFOID:0000000010119228
A.
Behind power switch
No.
Component Function
1.
NATS antenna amp.
2.
Power switch
Power switch has push switch inside which detects that power switch is pressed, and then
transmits the signal to BCM. BCM changes the power supply position with the operation of
power switch. BCM maintains the power supply position status while power switch is not op-
erated.
Refer to
for detailed installation location.
3.
BCM
BCM controls INTELLIGENT KEY SYSTEM (READY SET FUNCTION), NISSAN VEHICLE
IMMOBILIZER SYSTEM-NATS [NVIS (NATS)] and VEHICLE SECURITY SYSTEM.
BCM performs the ID verification between BCM and Intelligent Key when the Intelligent Key
is carried into the detection area of inside key antenna, and power switch is pressed. If the
ID verification result is OK, power switch operation is available.
Then, when the power switch is turned to the ON position, BCM performs ID verification be-
tween BCM and VCM. If the ID verification result is OK, vehicle can be set to READY.
Refer to
BCS-5, "BODY CONTROL SYSTEM : Component Parts Location"
for detailed in-
stallation location.
4.
Remote keyless entry receiver
Remote keyless entry receiver receives each button operation signal and electronic key ID
signal from Intelligent Key, and then transmits the signal to BCM.
Refer to
DLK-18, "Remote Keyless Entry Receiver"
for detailed installation location.
ALKIA3118ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст