Nissan Leaf. Manual — part 313
BRC-42
< SYSTEM DESCRIPTION >
[WITH VDC]
SYSTEM
• The electrically-driven intelligent brake unit transmits a brake warning lamp request signal to the ABS actua-
tor and electric unit (control unit) via CAN communication when detecting a malfunction in the electrically-
driven intelligent brake unit.
• The ABS actuator and electric unit (control unit) receiving a brake warning lamp request signal, and trans-
mits a brake system warning lamp signal to the combination meter via CAN communication.
• The combination meter turns ON the brake system warning lamp when receiving a brake system warning
lamp signal.
• For the relationship between warning lamp and DTC, refer to
.
LIGHTING CONDITION
When any of the condition listed below is satisfied while the power switch ON:
• Brake fluid level switch ON.
• Parking switch ON.
• A malfunction is detected in the EBD function of the ABS actuator and electric unit (control unit).
• A malfunction is detected in the electrically-driven intelligent brake unit.
• For the relationship between warning lamp and DTC, refer to
(electrically-driven intelli-
gent brake unit) or
[ABS actuator and electric unit (control unit)].
SHUTOFF CONDITION
• When the condition listed below is satisfied while the power switch ON:
- Brake fluid level switch is OFF.
- Parking brake switch is OFF.
- Erase DTC
• Power switch OFF
TIMING CHART
WARNING/INDICATOR/CHIME LIST : VDC OFF Indicator Lamp
INFOID:0000000010120041
DESIGN/PURPOSE
The VDC OFF indicator lamp warns the driver that VDC function and
TCS function are OFF.
BULB CHECK
The VDC OFF indicator lamp turns ON and stays ON for several seconds after turning ON the power switch.
JSFIA1853GB
JPNIA1867ZZ
SYSTEM
BRC-43
< SYSTEM DESCRIPTION >
[WITH VDC]
C
D
E
G
H
I
J
K
L
M
A
B
BRC
N
O
P
SYNCHRONIZATION WITH MASTER WARNING LAMP
Not applicable
OPERATION AT COMBINATION METER CAN COMMUNICATION CUT-OFF OR UNUSUAL SIG-
NAL
For actions on CAN communications blackout in the combination meter, refer to
SYSTEM DIAGRAM
SIGNAL PATH
• The ABS actuator and electric unit (control unit) receives a VDC OFF switch signal from the VDC OFF
switch.
• The ABS actuator and electric unit (control unit) transmits a VDC OFF indicator lamp signal to the combina-
tion meter via CAN communication according to the received VDC OFF switch signal.
• The combination meter turns ON the VDC OFF indicator lamp when receiving a VDC OFF indicator lamp
signal.
LIGHTING CONDITION
When all of the condition listed below are satisfied:
• Power switch ON
• VDC OFF switch ON (VDC function and TCS function non-operational status)
SHUTOFF CONDITION
• When the condition listed below is satisfied while the power switch ON:
- VDC OFF switch OFF (VDC function and TCS function standby status)
• Power switch OFF
TIMING CHART
WARNING/INDICATOR/CHIME LIST : VDC Warning Lamp
INFOID:0000000010120042
DESIGN/PURPOSE
JSFIA1858GB
JSFIA1859GB
BRC-44
< SYSTEM DESCRIPTION >
[WITH VDC]
SYSTEM
• When VDC function, TCS function, or brake limited slip differential
(BLSD) function is activated, the VDC warning lamp blinks to
inform the driver of the activation of the function.
• When VDC function, TCS function, ABS function, EBD function,
brake limited slip differential (BLSD) function, or brake assist func-
tion of the ABS actuator and electric unit (control unit) has a mal-
function, the VDC warning lamp turns ON to warn the driver of the
malfunction.
NOTE:
The VDC warning lamp may turn ON when the brake warning lamp
or ABS warning lamp turns ON. For details, refer to
BULB CHECK
The VDC warning lamp turns ON and stays ON for approximately one second after turning ON the power
switch.
SYNCHRONIZATION WITH MASTER WARNING LAMP
Not applicable
OPERATION AT COMBINATION METER CAN COMMUNICATION CUT-OFF OR UNUSUAL SIG-
NAL
For actions on CAN communications blackout in the combination meter, refer to
SYSTEM DIAGRAM
*: For DTCs that the VDC warning lamp turns ON, refer to
SIGNAL PATH
When Operating VDC Function, TCS Function, Brake Limited Slip Differential (BLSD) Function:
• The ABS actuator and electric unit (control unit) transmits a VDC warning lamp signal to the combination
meter via CAN communication when operating in the VDC function, TCS function, or brake limited slip differ-
ential (BLSD) function.
• The combination meter blinks the VDC warning lamp when receiving a VDC warning lamp signal.
When VDC Function, TCS Function, Brake Limited Slip Differential (BLSD) Function, Brake Assist Function Are In
Abnormal State:
• The ABS actuator and electric unit (control unit) transmits a VDC warning lamp signal to the combination
meter via CAN communication when detecting a malfunction in the VDC function, TCS function, brake lim-
ited slip differential (BLSD) function, or brake assist function.
• The combination meter turns ON the VDC warning lamp when receiving a VDC warning lamp signal.
• For the relationship between warning lamp and DTC, refer to
LIGHTING CONDITION
LIGHTING CONDITION
JPNIA1871ZZ
JSFIA1856GB
SYSTEM
BRC-45
< SYSTEM DESCRIPTION >
[WITH VDC]
C
D
E
G
H
I
J
K
L
M
A
B
BRC
N
O
P
• A malfunction is detected in the VDC function, TCS function, ABS function, EBD function, brake limited slip
differential (BLSD) function, or brake assist function of the ABS actuator and electric unit (control unit).
• For the relationship between warning lamp and DTC, refer to
BLINKING CONDITION
When VDC function, TCS function, or brake limited slip differential (BLSD) function is under operating condi-
tions.
SHUTOFF CONDITION
• When the condition listed below is satisfied while the power switch ON:
- Erase DTC
- When VDC function, TCS function, or brake limited slip differential (BLSD) function is not under operating
conditions.
• Power switch OFF.
TIMING CHART
JSFIA1857GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст