Nissan Leaf. Manual — part 1261
VSP-64
< SYMPTOM DIAGNOSIS >
THE START UP SOUND SPEAKER DOES NOT SOUND
THE START UP SOUND SPEAKER DOES NOT SOUND
Description
INFOID:0000000010121605
The start up sound do not sound.
Diagnosis Procedure
INFOID:0000000010121606
1.
CHECK START UP SOUND SPEAKER SIGNAL CIRCUIT
Check start up sound speaker signal circuit. Refer to
VSP-50, "Component Function Check"
Is the inspection result normal?
YES
>> Refer to
GI-53, "Intermittent Incident"
.
NO
>> Repair or replace the malfunctioning parts.
THE POWER SWITCH OPERATION SOUND DOES NOT SOUND
VSP-65
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
VSP
N
O
P
THE POWER SWITCH OPERATION SOUND DOES NOT SOUND
Description
INFOID:0000000010121607
The power switch operation sound does not sound when the power switch is operated.
Diagnosis Procedure
INFOID:0000000010121608
1.
CHECK POWER SWITCH SIGNAL CIRCUIT
Check power switch signal circuit. Refer to
VSP-58, "Component Function Check"
.
Is the inspection result normal?
YES
>> Refer to
GI-53, "Intermittent Incident"
.
NO
>> Repair or replace the malfunctioning parts.
VSP-66
< SYMPTOM DIAGNOSIS >
NORMAL OPERATING CONDITION
NORMAL OPERATING CONDITION
APPROACHING VEHICLE SOUND FOR PEDESTRIANS (VSP) SYSTEM
APPROACHING VEHICLE SOUND FOR PEDESTRIANS (VSP) SYSTEM : Descrip-
tion
INFOID:0000000010121609
• The VSP during forward driving fades out and stops operating when the vehicle stops [vehicle speed 0 km/h
(0 MPH) is detected].
• The VSP during reverse driving continues to operate when the vehicle is stopped.
START UP SOUND SYSTEM
START UP SOUND SYSTEM : Description
INFOID:0000000010121610
• The power switch operation sound may not be able to respond normally if the power switch is pressed
quickly.
• The power switch operation sound is inoperative when “Effects” in the combination meter settings is OFF.
CHARGE SOUND SYSTEM
CHARGE SOUND SYSTEM : Description
INFOID:0000000010121611
• Charge acceptance sound is inoperative when the power switch is ON.
• During quick charge, the plug-in detection sound does not operate.
APPROACHING VEHICLE SOUND FOR PEDESTRIANS (VSP) CONTROL UNIT
VSP-67
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
VSP
N
O
P
REMOVAL AND INSTALLATION
APPROACHING VEHICLE SOUND FOR PEDESTRIANS (VSP) CONTROL
UNIT
Removal and Installation
INFOID:0000000010121612
REMOVAL
1. Remove the glove box cover assembly. Refer to
IP-17, "Removal and Installation"
.
2. Remove the VSP control unit connector.
3. Remove screw , and then remove the VSP control unit .
INSTALLATION
Install in the reverse order of removal.
AWMIA1409ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст