Nissan Leaf. Manual — part 974
MWI
THE LOW WASHER FLUID WARNING CONTINUES DISPLAYING, OR DOES
NOT DISPLAY
MWI-99
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
THE LOW WASHER FLUID WARNING CONTINUES DISPLAYING, OR
DOES NOT DISPLAY
Description
INFOID:0000000010122439
• The warning is still displayed even after washer fluid is added.
• The warning is not displayed even though the washer tank is empty.
Diagnosis Procedure
INFOID:0000000010122440
1.
CHECK WASHER FLUID LEVEL SWITCH SIGNAL CIRCUIT
Check the washer fluid level switch signal circuit. Refer to
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace harness or connector.
2.
CHECK WASHER FLUID LEVEL SWITCH UNIT
Check the washer fluid level switch. Refer to
MWI-91, "Component Inspection"
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-102, "Removal and Installation"
NO
>> Replace washer fluid level switch. Refer to
WW-45, "Removal and Installation"
.
MWI-100
< SYMPTOM DIAGNOSIS >
THE PARKING BRAKE RELEASE WARNING CONTINUES DISPLAYING, OR
DOES NOT DISPLAY
THE PARKING BRAKE RELEASE WARNING CONTINUES DISPLAYING,
OR DOES NOT DISPLAY
Description
INFOID:0000000010122441
• The parking brake warning is displayed during vehicle travel even though the parking brake is released.
• The parking brake warning is not displayed even though driving the vehicle with the parking brake applied.
Diagnosis Procedure
INFOID:0000000010122442
1.
CHECK PARKING BRAKE WARNING LAMP OPERATION
1. Power switch ON.
2. Check the operation of the brake warning lamp while operating the parking brake.
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-102, "Removal and Installation"
NO
>> GO TO 2.
2.
CHECK PARKING BRAKE SWITCH SIGNAL CIRCUIT
1. Power switch OFF.
2. Check the parking brake switch signal circuit. Refer to
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace harness or connector.
3.
CHECK PARKING BRAKE SWITCH
Check the parking brake switch. Refer to
MWI-93, "Component Inspection"
.
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-102, "Removal and Installation"
NO
>> Replace parking brake switch. Refer to
.
Condition
Warning lamp status
Parking brake applied
ON
Parking brake released
OFF
MWI
NORMAL OPERATING CONDITION
MWI-101
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
NORMAL OPERATING CONDITION
INFORMATION DISPLAY
INFORMATION DISPLAY : Description
INFOID:0000000010122443
OUTSIDE AIR TEMPERATURE
The displayed outside air temperature display may differ from the actual temperature because it is a corrected
value calculated from the outside air temperature sensor signal by the combination meter. Refer to
"OUTSIDE AIR TEMPERATURE DISPLAY : System Description"
for details on the correction process.
MWI-102
< REMOVAL AND INSTALLATION >
COMBINATION METER
REMOVAL AND INSTALLATION
COMBINATION METER
Exploded View
INFOID:0000000010122444
REMOVAL
.
DISASSEMBLY
Removal and Installation
INFOID:0000000010122445
REMOVAL
1. Remove the upper meter. Refer to
MWI-103, "Removal and Installation"
2. Remove the cluster lid A. Refer to
IP-17, "Removal and Installation"
.
3. Remove screws and connector, and then remove combination meter.
INSTALLATION
Install in the reverse order of removal.
Disassembly and Assembly
INFOID:0000000010122446
DISASSEMBLY
Disengage the tabs to separate front cover.
ASSEMBLY
Assemble in the reverse order of disassembly.
1.
Unified meter control unit
2.
Front cover
AWNIA2999ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст