Nissan Leaf. Manual — part 1035
PWC-58
< SYMPTOM DIAGNOSIS >
ANTI-PINCH SYSTEM DOES NOT OPERATE NORMALLY (DRIVER SIDE)
ANTI-PINCH SYSTEM DOES NOT OPERATE NORMALLY (DRIVER SIDE)
Diagnosis Procedure
INFOID:0000000010119971
1.
CHECK POWER WINDOW AUTO OPERATION
Check AUTO operation when anti-pinch function does not operate.
.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> GO TO 2.
2.
REPLACE MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH
• Replace main power window and door lock/unlock switch.
• Confirm the operation after replacement.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Check intermittent incident. Refer to
GI-53, "Intermittent Incident"
.
POWER WINDOW RETAINED POWER OPERATION DOES NOT OPERATE
PROPERLY
PWC-59
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
POWER WINDOW RETAINED POWER OPERATION DOES NOT OPER-
ATE PROPERLY
Diagnosis Procedure
INFOID:0000000010119972
1.
CHECK FRONT DOOR SWITCH
Check front door switch.
DLK-102, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
REPLACE BCM
• Replace BCM. Refer to
BCS-72, "Removal and Installation"
.
• Confirm the operation after replacement.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Check intermittent incident. Refer to
GI-53, "Intermittent Incident"
.
PWC-60
< SYMPTOM DIAGNOSIS >
POWER WINDOW LOCK SWITCH DOES NOT FUNCTION
POWER WINDOW LOCK SWITCH DOES NOT FUNCTION
Diagnosis Procedure
INFOID:0000000010119973
1.
REPLACE POWER WINDOW MAIN SWITCH
• Replace power window main switch.
• Confirm the operation after replacement.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Check intermittent incident. Refer to
GI-53, "Intermittent Incident"
.
POWER WINDOW MAIN SWITCH
PWC-61
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
REMOVAL AND INSTALLATION
POWER WINDOW MAIN SWITCH
Removal and Installation
INFOID:0000000010119974
REMOVAL
1. Remove power window main switch finisher. Refer to
INT-19, "Removal and Installation"
.
2. Remove power window main switch (1) from power window
main switch finisher (2) using flat-head screw driver (A).
CAUTION:
Do not fold the pawl of power window main switch finisher.
NOTE:
The same procedure is also performed for front power window
switch (passenger side) and rear power window switch (LH & RH).
INSTALLATION
Install in the reverse order of removal.
NOTE:
If power window main switch is replaced or is removed, it is necessary to perform the initialization procedure.
: Pawl
JMKIA6331ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст