Nissan Leaf. Manual — part 156
B C S - 1 8
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (BCM)
WORK SUPPORT
*: Initial setting
WIPER
WIPER : CONSULT Function - WIPER
INFOID:0000000010122313
DATA MONITOR
Test Item
Description
FR FOG LAMP
This test is able to check front fog lamp operation [On/Off].
HEAD LAMP
This test is able to check headlamp operation [Off/Low/Hi].
ILL DIM SIGNAL
This test is able to check head lamp illumination dimming operation [On/Off].
TAIL LAMP
This test is able to check taillamp operation [Off/On].
Support Item
Setting
Description
AUTO LIGHT LOGIC SET
MODE6
Autolamp function OFF.
MODE5
MODE4
MODE3
Autolamp function ON at twilight.
MODE2
Autolamp function ON at twilight or with wiper LO and HI
operation.
MODE1*
Autolamp function ON at twilight or with wiper INT, LO and
HI operation.
BATTERY SAVER SET
Off
Exterior lamp battery saver function OFF.
On*
Exterior lamp battery saver function ON.
CUSTOM A/LIGHT SETTING
MODE4
Less sensitive than normal setting (turns ON later).
MODE3
More sensitive than MODE2.
MODE2
More sensitive than normal setting (turns ON earlier).
MODE1*
Normal setting.
ILL DELAY SET
MODE 8
180 sec.
Autolamp delay timer operation time.
MODE 7
150 sec.
MODE 6
120 sec.
MODE 4
90 sec.
MODE 5
60 sec.
MODE 3
30 sec.
MODE 2
OFF
MODE 1*
45 sec.
Monitor Item [Unit]
Description
PUSH SW [On/Off]
Indicates condition of power switch.
VEH SPEED 1 [km/h]
Indicates vehicle speed signal received from ABS on CAN communication line.
FR WIPER HI [On/Off]
Indicates condition of wiper operation of combination switch.
FR WIPER LOW [On/Off]
FR WASHER SW [On/Off]
FR WIPER INT [On/Off]
FR WIPER STOP [On/Off]
Indicates front wiper auto stop signal received from IPDM E/R on CAN communication
line.
INT VOLUME [1
− 7]
Indicates condition of intermittent wiper operation of combination switch.
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-19
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
ACTIVE TEST
WORK SUPPORT
*: Initial setting
FLASHER
FLASHER : CONSULT Function (BCM - FLASHER)
INFOID:0000000010122314
DATA MONITOR
ACTIVE TEST
WORK SUPPORT
RR WIPER ON [On/Off]
Indicates condition of rear wiper operation of combination switch.
RR WIPER INT [On/Off]
RR WASHER SW [On/Off]
RR WIPER STOP [On/Off]
Indicates rear wiper auto stop input from rear wiper motor.
Monitor Item [Unit]
Description
Test Item
Description
FR WIPER
This test is able to check front wiper operation [Hi/Lo/INT/Off].
RR WIPER
This test is able to check rear wiper operation [On/Off].
Support Item
Setting
Description
DROP WIPE FUNC SET
MODE4
Front wiper and rear wiper drop wiper function ON.
MODE3
Front wiper drop wiper function OFF and rear wiper drop wiper function ON.
MODE2*
Front wiper drop wiper function ON and rear wiper drop wiper function OFF.
MODE1
Front wiper and rear wiper drop wiper function OFF.
WIPER SPEED SETTING
Off*
Front wiper intermittent time linked with wiper dial position.
On
Front wiper intermittent time linked with vehicle speed and wiper dial position.
Monitor Item [Unit]
Description
REQ SW -DR [On/Off]
Indicates condition of door request switch LH.
REQ SW -AS [On/Off]
Indicates condition of door request switch RH.
PUSH SW [On/Off]
Indicates condition of power switch.
TURN SIGNAL R [On/Off]
Indicates condition of turn signal function of combination switch.
TURN SIGNAL L [On/Off]
HAZARD SW [On/Off]
Indicates condition of hazard switch.
RKE-LOCK [On/Off]
Indicates condition of lock signal from Intelligent Key.
RKE-UNLOCK [On/Off]
Indicates condition of unlock signal from Intelligent Key.
RKE-PANIC [On/Off]
Indicates condition of panic alarm signal from Intelligent Key.
Test Item
Description
FLASHER
This test is able to check turn signal lamp operation [Off/LH/RH].
BCS-20
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (BCM)
AIR CONDITIONER
AIR CONDITIONER : CONSULT Function (BCM - AIR CONDITIONER)
INFOID:0000000010122315
DATA MONITOR
ACTIVE TEST
INTELLIGENT KEY
INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)
INFOID:0000000010122316
SELF DIAGNOSTIC RESULT
DATA MONITOR
Support Item
Setting
Description
HAZARD ANSWER BACK
Lock/Unlock
Hazard warning lamp answer back for LOCK and UNLOCK with request switch or
Intelligent Key.
Unlock Only
Hazard warning lamp answer back for UNLOCK only with request switch or Intelli-
gent Key.
Lock Only
Hazard warning lamp answer back for LOCK only with request switch or Intelligent
Key.
Off
Hazard warning lamp answer back OFF.
Monitor Item [Unit]
Description
FAN ON SIG [On/Off]
Indicates condition of fan switch.
AIR COND SW [On/Off]
Indicates condition of A/C switch.
Test Item
Description
A/C INDICATOR
This test is able to check A/C indicator operation [Off/On].
Monitor Item [Unit]
Main
Description
REQ SW -DR [On/Off]
×
Indicates condition of door request switch LH.
REQ SW -AS [On/Off]
×
Indicates condition of door request switch RH.
REQ SW -BD/TR [On/Off]
×
Indicates condition of back door request switch.
PUSH SW [On/Off]
Indicates condition of power switch.
BRAKE SW 1 [On/Off]
×
Indicates condition of brake switch.
BRAKE SW 2 [On/Off]
Indicates condition of brake switch.
DETE/CANCL SW [On/Off]
×
Indicates condition of P (park) position.
SFT PN/N SW [On/Off]
×
Indicates condition of P (park) or N (neutral) position.
UNLK SEN -DR [On/Off]
×
Indicates condition of door unlock sensor.
PUSH SW -IPDM [On/Off]
Indicates condition of power switch received from IPDM E/R on CAN commu-
nication line.
IGN RLY1 -F/B [On/Off]
Indicates condition of ignition relay 1 received from IPDM E/R on CAN commu-
nication line.
DETE SW -IPDM [On/Off]
Indicates condition of detent switch received from TCM on CAN communication
line.
SFT P -MET [On/Off]
Indicates condition of P (park) position from TCM on CAN communication line.
SFT N -MET [On/Off]
Indicates condition of N (neutral) position from IPDM E/R on CAN communica-
tion line.
ENGINE STATE [Stop/Start/Crank/Run]
×
Indicates condition of engine state from ECM on CAN communication line.
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-21
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
ACTIVE TEST
WORK SUPPORT
VEH SPEED 1 [mph/km/h]
×
Indicates condition of vehicle speed signal received from ABS on CAN commu-
nication line.
VEH SPEED 2 [mph/km/h]
×
Indicates condition of vehicle speed signal received from combination meter on
CAN communication line.
DOOR STAT -DR [LOCK/READY/UNLK]
×
Indicates condition of driver side door status.
DOOR STAT -AS [LOCK/READY/UNLK]
×
Indicates condition of passenger side door status.
ID OK FLAG [Set/Reset]
Indicates condition of Intelligent Key ID.
PRMT ENG STRT [Set/Reset]
Indicates condition of engine start possibility.
RKE OPE COUN1 [0-19]
×
When remote keyless entry receiver receives the signal transmitted while oper-
ating the Intelligent Key, the numerical value starts changing.
RKE-LOCK [On/Off]
Indicates condition of lock signal from Intelligent Key.
RKE-UNLOCK [On/Off]
Indicates condition of unlock signal from Intelligent Key.
RKE-PANIC [On/Off]
Indicates condition of panic signal from Intelligent Key.
RKE-MODE CHG [On/Off]
Indicates condition of mode change signal from Intelligent Key.
Monitor Item [Unit]
Main
Description
Test Item
Description
INSIDE BUZZER
This test is able to check combination meter warning chime operation [Off/Take Out/Knob/
Key].
LCD
B&P N
This test is able to check combination meter traction motor start information.
B&P I
ID NG
This test is able to check combination meter key ID warning information.
ROTAT
This item is displayed, but is not used.
SFT P
INSRT
BATT
This test is able to check combination meter Intelligent Key low battery warning
information.
NO KY
This item is displayed, but is not used.
OUTKEY
This test is able to check combination meter take away warning information.
LK WN
This test is able to check combination meter OFF position warning information.
Off
—
BATTERY SAVER
This test is able to check interior room lamp battery saver operation [Off/On].
ENGINE SW ILLUMI
This test is able to check power switch illumination operation [Off/On].
PUSH SWITCH INDICATOR
This test is able to check power switch ACC/ON indicator operation [Off/On].
TRUNK/BACK DOOR
This test is able to check back door opener actuator operation [Open].
INT LAMP
This test is able to check interior room lamp operation [Off/On].
INDICATOR
This test is able to check combination meter warning lamp operation [Off/KEY ON/KEY IND].
FLASHER
This test is able to check security hazard lamp operation [RH/LH/Off].
OUTSIDE BUZZER
This test is able to check Intelligent Key warning buzzer operation [On/Off].
HORN
This test is able to check horn operation [On].
Support Item
Setting
Description
LOCK/UNLOCK BY I-KEY
On*
Door lock/unlock function from request switch ON.
Off
Door lock/unlock function from request switch OFF.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст