Nissan Leaf. Manual — part 836
A/C CONTROL (A/C AUTO AMP.)
HAC-347
< REMOVAL AND INSTALLATION >
[AUTO A/C (WITHOUT HEAT PUMP)]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
REMOVAL AND INSTALLATION
A/C CONTROL (A/C AUTO AMP.)
Removal and Installation
INFOID:0000000010122058
REMOVAL
1. Remove cluster lid C. Refer to
IP-17, "Removal and Installation"
2. Release harness clips (B) (if equipped).
3. Remove screws (A).
4. Disengage pawls, and then remove A/C auto amp. (1) from clus-
ter lid C.
INSTALLATION
Install in the reverse order of removal.
: Pawl
JPIIA1819ZZ
HAC-348
< REMOVAL AND INSTALLATION >
[AUTO A/C (WITHOUT HEAT PUMP)]
AMBIENT SENSOR
AMBIENT SENSOR
Removal and Installation
INFOID:0000000010122059
REMOVAL
1. Remove front under cover. Refer to
EXT-23, "FRONT UNDER COVER : Removal and Installation"
.
2. Disconnect ambient sensor connector (A).
3. Disengage pawl, and then remove ambient sensor (1) from the
vehicle.
INSTALLATION
Install in the reverse order of removal.
: Pawl
JPIIA1820ZZ
IN-VEHICLE SENSOR
HAC-349
< REMOVAL AND INSTALLATION >
[AUTO A/C (WITHOUT HEAT PUMP)]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
IN-VEHICLE SENSOR
Removal and Installation
INFOID:0000000010122060
REMOVAL
1. Remove instrument lower panel LH. Refer to
IP-17, "Removal and Installation"
2. Remove screw (A), and then remove in-vehicle sensor (1) from
instrument lower panel LH.
INSTALLATION
Install in the reverse order of removal.
JPIIA1838ZZ
HAC-350
< REMOVAL AND INSTALLATION >
[AUTO A/C (WITHOUT HEAT PUMP)]
SUNLOAD SENSOR
SUNLOAD SENSOR
Removal and Installation
INFOID:0000000010122061
REMOVAL
1. Remove switch panel. Refer to
IP-17, "Removal and Installation"
.
2. Disconnect sunload sensor connector (A).
3. Disengage pawls, and then remove sunload sensor (1) from
switch panel.
INSTALLATION
Install in the reverse order of removal.
: Pawl
JPIIA1831ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст