Nissan Leaf. Manual — part 948
INSIDE MIRROR
MIR-19
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
REMOVAL AND INSTALLATION
INSIDE MIRROR
Exploded View
INFOID:0000000010122878
Removal and Installation
INFOID:0000000010122879
Removal
1. Remove inside mirror cover.
2. Disconnect harness connector from inside mirror.
3. Loosen bolt and slide inside mirror upward to remove.
Installation
Install in the reverse order of removal.
1.
Windshield glass
2.
Mirror base
3.
Harness connector
4.
Bolt
5.
Inside mirror
6.
Inside mirror cover
JMLIA0906GB
MIR-20
< REMOVAL AND INSTALLATION >
DOOR MIRROR
DOOR MIRROR
Exploded View
INFOID:0000000010122880
DOOR MIRROR ASSEMBLY
DOOR MIRROR ASSEMBLY : Removal and Installation
INFOID:0000000010122881
CAUTION:
When removing, always use a remover tool that is made of plastic to prevent damage to the parts.
REMOVAL
1. Remove front door finisher. Refer to
INT-19, "Removal and Installation"
2. Remove door mirror corner cover.
a. Insert a remover tool A into the hole as shown in the figure to disengage the fixing pawls.
1.
Glass mirror
2.
Door mirror actuator
3.
Door mirror assembly
4.
Door mirror corner cover
5.
Door mirror cover
A.
Door mirror stud
: Pawl
ALLIA1274ZZ
: Pawl
JMLIA1669ZZ
DOOR MIRROR
MIR-21
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
b. Remove door mirror corner cover from door panel.
3. Remove partially front door sealing screen.
4. Disconnect door mirror harness connector
.
5. Remove door mirror mounting nuts .
6. Remove door mirror harness connector from door panel as
shown in the figure, and then remove door mirror assembly
.
INSTALLATION
Install in the reverse order of removal.
GLASS MIRROR
GLASS MIRROR : Removal and Installation
INFOID:0000000010122882
REMOVAL
1. Place the glass mirror upward.
2. Remove glass mirror.
a. Put a strip of protective tape (B) on mirror body.
b. Insert a remover tool (A) into the recess at lower side between glass mirror (1) and actuator, and push up
pawls to remove glass mirror lower side.
NOTE:
Insert a remover tool into recesses, and push up while rotating (twisting) to make work easier.
c. Remove the glass mirror fixing butyl-tape (2) with a cutting tool and remove glass mirror from mirror body.
d. Disconnect the heater harness connectors (if equipped).
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
After installation, visually check that pawls are securely engaged.
DOOR MIRROR COVER
DOOR MIRROR COVER : Removal and Installation
INFOID:0000000010122883
REMOVAL
1. Remove the glass mirror. Refer to
MIR-21, "GLASS MIRROR : Removal and Installation"
2. Remove door mirror actuator.
JMLIA1670ZZ
JMLIA1671ZZ
MIR-22
< REMOVAL AND INSTALLATION >
DOOR MIRROR
3. Disengage door mirror cover (2) fixing pawls with a remover tool.
4. Remove door mirror cover from door mirror body (1).
INSTALLATION
Note the following item and then install in the reverse order of removal.
CAUTION:
After installation, visually check that pawls are securely engaged.
: Pawl
JMLIA1672ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст