Nissan Leaf. Manual — part 27
AV
OPERATION
AV-99
< SYSTEM DESCRIPTION >
[AUDIO W/O NAVI (FOR MEXICO)]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
OPERATION
Switch name and Function
INFOID:0000000010385188
Names and functions of AV control unit switches
1. Design
2. Switch name and function
AWNIA3441ZZ
No.
Switch name
Function
1
FM·AM
Press to switch between the FM radio band and the AM radio band.
2
CD
Press to display the CD screen.
3
AUX
Press to switch between USB memory/iPod player
*1
/Bluetooth
®
streaming audio
*2
/AUX
screens.
4
VOL (volume control)
Press to adjust the volume of the stereo.
5
(audio system ON·OFF)
Press to turn the audio system ON or OFF.
6
(Day/Night)
• Press to switch between the day screen (bright) and the night screen (dark).
• Press and hold to turn off the display, then press again to turn on the display.
7
CAMERA
Press to turn the predictive course lines ON or OFF.
8
OPEN/TILT
• Press to open the monitor to access the CD slot and the SD card slot.
• Press and hold to adjust the monitor angle. (3 preset angles)
- Press and hold until a chime sounds. When the button is released, the next preset angle
will be selected.
9
(Zero emission)
Press to display the setting screen where several useful functions for electric vehicle driving
are determined.
10
SEEK/TRACK
• Press to select a track/station.
• Press and hold to search for a track/station automatically or to fast-forward/reverse when
listening to music.
11
STATUS
Press to display the current status of the air conditioner, radio, audio and vehicle information
(drivable distance and average energy economy).
12
SETTING
Press to access the system settings.
AV-100
< SYSTEM DESCRIPTION >
[AUDIO W/O NAVI (FOR MEXICO)]
OPERATION
• *1: Displayed when iPod
®
is connected.
• *2: Displayed when Bluetooth
®
audio is registered and “Bluetooth connection” setting is ON.
Names and functions of steering switch
Using the steering switch, operations of the audio and telephone can be performed without releasing hands
from the steering wheel.
1. Design
2. Switch name and function
13
INFO
Press to display the vehicle information.
14
(CD eject)
Press to eject a CD.
No.
Switch name
Function
AWNIA3456ZZ
No.
switch name
Major functions
1
SOURCE
Press to change the mode to available audio source:
• AM and FM radio.
• iPod.
• CD.
• USB.
• Bluetooth
®
Audio.
Tilt up/down for
less than 1.5 sec-
onds.
AM and FM radio:
• skips up or down through the preset stations.
iPod, CD, USB or Bluetooth
®
Audio:
• skips up or down through the tracks.
Tilt up/down for
more than 1.5
seconds.
AM and FM radio:
• seeks up or down to the next station.
CD (except compressed audio files):
• fast forwards or rewinds through the track.
CD (compressed audio files) and USB:
• skips up or down through the folders.
2
-
+ (Volume control)
Press to increase or decrease the volume.
3
(PHONE SEND)
Press to send or answer calls.
4
(PHONE END)
Press to end or reject calls.
AV
HANDLING PRECAUTION
AV-101
< SYSTEM DESCRIPTION >
[AUDIO W/O NAVI (FOR MEXICO)]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
HANDLING PRECAUTION
Display
INFOID:0000000010385190
• When the compartment temperature is low, the display images may look slower because the LCD response
is deteriorated. The system will recover its normal operation when the cabin temperature increases to an
appropriate level.
• When the compartment temperature is low (0
°C or less), the display images may look slower. It is character-
istic of the LCD monitor and should not be considered to be a malfunction. When the temperature is at the
operating temperature (0
°C to 50°C), the display returns to normal.
• There may be small dark or bright dots in the screen or remaining display content may be found (image lag).
These are inherent symptoms to any LCD monitor and should not be considered to be a malfunction.
• The image may look bright or dark when viewed obliquely from the rear. It is inherent to any LCD monitor
and should not be considered to be a malfunction.
• Do not apply pressure on the LCD monitor. Doing so may cause irregularities in the screen image or render
it inoperative.
• Do not use hard cloth, organic solvent (alcohol, benzine, and thinner), or chemical wipe to clean the LCD
monitor. Doing so may affect the panel surface. When cleaning the LCD monitor, always wipe it with a soft
cloth after shutting off the power. For severe contamination, use a soft cloth dampened with mild detergent
(no droplets can be present).
Audio
INFOID:0000000010385191
• When an MP3/WMA disc is replayed, it may take some time to start the playback after the disc is inserted,
because the contents of the disc files must be analyzed.
• The extensions for MP3/WMA files are ".MP3", ".WMA", ".mp3", and ".wma". Any file with a different exten-
sion or no extension cannot be played back.
• If trying to play a music CD (CD-DA) containing MP3/WMA file, MP3/WMA file is not played.
• The compatibility of a CD–R depends on the combination of the writing software/hardware and the writing
rate. The disc has digital pulse signals written on it. If the specifications for writing depth and width (area) are
not compatible, these signals may not be played back correctly or the sounds may be lost or skipped.
• The file recorded with high bit rate
*
may have sound skipping.
• The playback order of MP3/WMA files may differ from the intended order because the writing software could
change the folder and file positions when writing data to a CD-R/CD-RW disc.
• For an MP3 file, the folder name and file name can be displayed as the title on the condition that each name
string consists of up to 16 alphanumeric letters (except for the extension). Any MP3 file with a name contain-
ing other letters or that is longer than the maximum length cannot be displayed correctly.
• Some MP3/WMA making software, text information editing software, writing software, or software configura-
tions may create files and discs in a format different from the proper specifications. In such a case, the text
information display or the playback function may not be available.
• A disc for which no session close or disc close process has been finished may not be played back.
• Some files may have incorrect playback time displays and therefore a part of the music cannot be played
back.
• 8 cm disc cannot be used.
• When playing back a Bluetooth
®
audio data, the sound may be interrupted for a moment. This is due to data
communication and should not be considered to be a malfunction. After the data communication finishes,
the playback will restart normally.
• Sound skipping may occur depending on the location where the Bluetooth audio device is installed.
• Music data stored in a Bluetooth
®
audio device at low bit rate has poor sound quality.
• Radio reception may decrease in performance during charge.
NOTE:
*: Bit rate means how many bits of data are processed or transmitted per the unit time.
iPod®
INFOID:0000000010385192
• If a headphone is connected to the iPod
®
, the iPod
®
may not be controlled.
• Some iPod
®
may not be compliant with connection. It is necessary to check compliant models of iPod
®
.
• If a USB extension cable is used for iPod
®
connection, iPod
®
may not be recognized or sound skipping may
occur in playback.
AV-102
< SYSTEM DESCRIPTION >
[AUDIO W/O NAVI (FOR MEXICO)]
HANDLING PRECAUTION
• In playing back iPod
®
audio, if the EQ function (equalizer function) of the iPod
®
is ON, sound may be dis-
torted.
• If the number of music in one category is increased to a large number, response may be poor. If the number
of music is large and shuffle is ON, operation of the iPod
®
itself may be slower.
RESTRICTIONS ON iPod
®
The following symptoms may occur, but the functions are not compliant and they should not be considered to
be a malfunction.
• When a Podcast divided into chapters is played back with iPod nano 3G, the play time may be displayed
incorrectly.
• The number of Audiobook is not displayed normally. When iPod
®
is disconnected and reset, it is displayed.
• When jacket photos are played with iPod nano 3G and iPod Classic, iPod
®
may be frozen or reset.
USB Connection
INFOID:0000000010385193
If a USB-HUB or USB extension cable is used when a USB is connected, USB is not recognized.
Hands-Free Phone
INFOID:0000000010385195
• In the following cases, the hands-free telephone function is not available.
- When the vehicle moves out of the communication zone of the cellular phone.
- When the vehicle is in a location that may block radio waves such as in an underground parking lot, behind
a building, or in mountainous areas.
- When the cellular phone is subject to dial-up limitations such as dial lock, and auto lock, transmission restric-
tion.
• It is not compliant with call waiting function and three-party call function.
• No incoming call can be received just after the key switch is turned to ON.
• Depending on the cellular phone connected, the ring volume may decrease.
• Before connecting a cellular phone, make sure that the operation limitations such as dial lock, auto lock and
transmission restriction are cancelled. If any of these settings is found to remain active, disconnect the
phone, cancel the setting, and reconnect it.
• When a menu or information is displayed on a cellular phone or when application of standby tool is activated,
the function may not be used. Use the cellular phone in the standby status.
• Once a cellular phone is removed, wait at least 10 seconds before reconnecting it.
• When attempting to use a cellular phone, always make sure that the battery charge level is sufficient.
• A snap sound may be heard or the audio signal may be interrupted during a call. This is not a malfunction. It
is caused by a switchover to an adjacent cellular zone due to weakening radio waves.
• When the reception status is poor or the surrounding sound level is too large, the voice on the phone may be
hard to hear.
• Because the system uses a digital line, the voice on the phone may be distorted or have unpleasant noises
due to the surrounding sounds.
• If the vehicle is equipped with a speed trap tracker (radar detector), the speaker may generate noises.
• This unit cannot be used to charge a cellular phone.
SD Card
INFOID:0000000010385196
To remove the SD card, wait for 15 seconds or more after turning the power switch OFF.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст