Nissan Juke (2014 year). Service Repair Manual — part 224
SR-22
< REMOVAL AND INSTALLATION >
CURTAIN AIR BAG MODULE
• Insert metal clips of front roof until a locking sound is heard. Pull metal clips and check that it is fully
locked to the vehicle body.
• Check perforation of curtain air bag module to check that curtain air bag module is not twisted.
• Never damage the harness while installing.
• If malfunction is detected by the air bag warning lamp, after repair or replacement of the malfunc-
tioning parts, reset the memory using self-diagnosis or CONSULT. Refer to
or
.
• After the work is completed, check that no system malfunction is detected by air bag warning lamp.
Revision: 2013 October
2014 JUKE
CRASH ZONE SENSOR
SR-23
< REMOVAL AND INSTALLATION >
C
D
E
F
G
I
J
K
L
M
A
B
SR
N
O
P
CRASH ZONE SENSOR
Exploded View
INFOID:0000000009750308
Removal and Installation
INFOID:0000000009750309
WARNING:
• Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait 3 minutes
or more.
• Never use the air tools or electric tools for servicing.
REMOVAL
1.
Remove front center grille fixing clips. Refer to
EXT-23, "Removal and Installation"
.
1.
Crash zone sensor
2.
Bracket
: Vehicle front
: Always replace after every disassembly.
: N·m (kg-m, ft-lb)
JMHIA1616GB
Revision: 2013 October
2014 JUKE
SR-24
< REMOVAL AND INSTALLATION >
CRASH ZONE SENSOR
2.
Pull back front center grille, it makes work space.
3.
Remove the crash zone sensor fixing nuts (A), and then pull the
bracket (1) and crash zone sensor (2) for vehicle front.
4.
Disconnect the crash zone sensor harness connector, and then remove crash zone sensor.
CAUTION:
• Never impact the crash zone sensor.
• Replace the crash zone sensor if it has been dropped or sus-
tained an impact.
• Replace the crash zone sensor of deployed driver air bag, deployed passenger air bag, seat belt pre-
tensioner and deployed lap pre-tensioner.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• Never use the old fixing nut after removal, replace with the new nut.
• Never damage the harness while installing.
• Always install normally aligning to the cutout hole, because performance of the crash zone sensor
excessively fluctuates according to the installation position.
• If malfunction is detected by the air bag warning lamp, after repair or replacement of the malfunc-
tioning parts, reset the memory using self-diagnosis or CONSULT. Refer to
or
.
• After the work is completed, check that no system malfunction is detected by air bag warning lamp.
: Vehicle front
JMHIA1617ZZ
: Vehicle front
JMHIA1618ZZ
JMHIA0009ZZ
Revision: 2013 October
2014 JUKE
SATELLITE SENSOR
SR-25
< REMOVAL AND INSTALLATION >
C
D
E
F
G
I
J
K
L
M
A
B
SR
N
O
P
SATELLITE SENSOR
Exploded View
INFOID:0000000009750310
Removal and Installation
INFOID:0000000009750311
WARNING:
• Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait 3 minutes
or more.
• Never use the air tools or electric tools for servicing.
FRONT SATELLITE SENSOR
Removal
1.
Remove the front door finisher. Refer to
INT-13, "Removal and Installation"
2.
Remove sealing screen (lower side).
NOTE:
Cut the butyl-tape so that some parts of the butyl-tape do not remain on the sealing screen, if the sealing
screen is reused.
1.
Front satellite sensor
2.
Front door inner panel
3.
Satellite sensor bracket
4.
Center pillar inner panel
5.
Rear satellite sensor
: Vehicle front
: Always replace after every disassembly.
: N·m (kg-m, ft-lb)
JMHIA1805GB
Revision: 2013 October
2014 JUKE
SR-26
< REMOVAL AND INSTALLATION >
SATELLITE SENSOR
3.
Remove the front satellite sensor mounting nuts (A), and then
pull the front satellite sensor (1).
4.
Disconnect the harness connector and then remove the front satellite sensor.
CAUTION:
• Never impact the front satellite sensor.
• Replace the front satellite sensor if it has been dropped or
sustained an impact.
• Replace the front satellite sensor of deployed side air bag module and deployed curtain air bag mod-
ule.
Installation
Note the following items, and then install in the reverse order of removal.
CAUTION:
• Never use the old fixing nuts after removal, replace with the new nuts.
• Never damage the harness while installing.
• Always install normally aligning to the cutout hole, because performance of the front satellite sensor
excessively fluctuates according to the installation position.
• If malfunction is detected by the air bag warning lamp, after repair or replacement of the malfunc-
tioning parts, reset the memory using self-diagnosis or CONSULT. Refer to
or
.
• After the work is completed, check that no system malfunction is detected by air bag warning lamp.
REAR SATELLITE SENSOR
Removal
1.
Remove the center pillar lower garnish. Refer to
INT-22, "CENTER PILLAR LOWER GARNISH : Removal
2.
Remove the rear satellite sensor mounting nut (A), and then pull
the rear satellite sensor (1).
3.
Disconnect the harness connector and then remove the rear satellite sensor.
JMHIA1806ZZ
JMHIA0009ZZ
JMHIA1620ZZ
Revision: 2013 October
2014 JUKE
SATELLITE SENSOR
SR-27
< REMOVAL AND INSTALLATION >
C
D
E
F
G
I
J
K
L
M
A
B
SR
N
O
P
CAUTION:
• Never impact the rear satellite sensor.
• Replace the rear satellite sensor if it has been dropped or sus-
tained an impact.
• Replace the rear satellite sensor of deployed side air bag module and deployed curtain air bag mod-
ule.
Installation
Note the following items, and then install in the reverse order of removal.
CAUTION:
• Never use the old fixing nut after removal, replace with the new nut.
• Never damage the harness while installing.
• Always install normally aligning to the cutout hole, because performance of the rear satellite sensor
excessively fluctuates according to the installation position.
• If malfunction is detected by the air bag warning lamp, after repair or replacement of the malfunc-
tioning parts, reset the memory using self-diagnosis or CONSULT. Refer to
.
• After the work is completed, check that no system malfunction is detected by air bag warning lamp.
JMHIA0009ZZ
Revision: 2013 October
2014 JUKE
SR-28
< REMOVAL AND INSTALLATION >
DIAGNOSIS SENSOR UNIT
DIAGNOSIS SENSOR UNIT
Exploded View
INFOID:0000000009750312
Removal and Installation
INFOID:0000000009750313
WARNING:
• Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait 3 minutes
or more.
• Before disconnecting the air bag sensor unit harness connector, be sure to disconnect the each har-
ness connector of the air bag module and pre-tensioner seat belt to prevent air bag deployment by
static electricity and pre-tensioner seat belt operation.
• Never use the air tools or electric tools for servicing.
• When replacing the air bag diagnosis sensor unit, always check with the parts department for the lat-
est parts information. Installing an incorrect air bag diagnosis sensor unit may or may not cause the
air bag warning lamp to illuminate and may cause incorrect deployment of the supplemental air bags
and seat belt pre-tensioners in a collision resulting in serious personal injury or death.
REMOVAL
1.
Always check the air bag diagnosis sensor unit ECU discriminated number (identification number) using
CONSULT.
2.
Disconnect the each connector of all air bag modules and pre-tensioner seat belts.
1.
Diagnosis sensor unit
: Vehicle front
: Always replace after every disassembly.
: N·m (kg-m, ft-lb)
JMHIA1660GB
Revision: 2013 October
2014 JUKE
DIAGNOSIS SENSOR UNIT
SR-29
< REMOVAL AND INSTALLATION >
C
D
E
F
G
I
J
K
L
M
A
B
SR
N
O
P
3.
Remove the center console assembly. Refer to
IP-24, "Removal and Installation"
4.
Disconnect the diagnosis sensor unit harness connectors (A).
5.
Remove the diagnosis sensor unit mounting bolts (B), and then
remove the diagnosis sensor unit.
CAUTION:
• Never impact the diagnosis sensor unit.
• Replace the diagnosis sensor unit if it has been dropped or
sustained an impact.
• Replace the diagnosis sensor unit of deployed SRS air bag and deployed SRS front seat belt pre-ten-
sioner.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• Never use the old bolts after removal, replace with the new bolts.
• Never damage the harness while installing.
• If malfunction is detected by the air bag warning lamp, after repair or replacement of the malfunc-
tioning parts, reset the memory using self-diagnosis or CONSULT. Refer to
.
• After the work is completed, check that no system malfunction is detected by air bag warning lamp.
• After replacing the air bag diagnosis sensor unit, confirm using CONSULT that the ECU discrimi-
nated number (identification number) of the new replacement air bag sensor unit matches the ECU
discriminated number (identification number) of the replaced (old) air bag diagnosis sensor unit.
NOTE:
If the ECU discriminated number of the new replacement air bag diagnosis sensor unit differs from the ECU
discriminated number of the replaced air bag diagnosis sensor unit, reconfirm the parts information and verify
that the correct air bag diagnosis sensor unit was installed.
JMHIA1624ZZ
JMHIA0009ZZ
Revision: 2013 October
2014 JUKE
SR-30
< REMOVAL AND INSTALLATION >
SEAT BELT PRE-TENSIONER
SEAT BELT PRE-TENSIONER
Exploded View
INFOID:0000000009750314
Removal and Installation
INFOID:0000000009750315
For removal and installation procedures, refer to
SB-5, "SEAT BELT RETRACTOR : Removal and Installa-
.
Revision: 2013 October
2014 JUKE
OCCUPANT DETECTION SYSTEM CONTROL UNIT
SR-31
< REMOVAL AND INSTALLATION >
C
D
E
F
G
I
J
K
L
M
A
B
SR
N
O
P
OCCUPANT DETECTION SYSTEM CONTROL UNIT
Exploded View
INFOID:0000000009750316
.
Removal and Installation
INFOID:0000000009750317
REMOVAL
1.
Remove passenger seat assembly. Refer to
.
2.
Remove occupant detection system control unit (1) fixing screws
(A).
3.
Disconnect occupant detection system control unit harness con-
nector (B), and then remove occupant detection system control
unit.
INSTALLATION
Install in the reverse order of removal.
JMHIA2826ZZ
Revision: 2013 October
2014 JUKE
SRC-1
RESTRAINTS
C
D
E
F
G
I
J
K
L
M
SECTION
SRC
A
B
SRC
N
O
P
CONTENTS
SRS AIRBAG CONTROL SYSTEM
PRECAUTION . . . . . . . . . . . ...
PRECAUTIONS . . . . . . . . . . . . ...
Precautions for Removing of Battery Terminal . .....
Service . . . . . . . . . . . . . . . . . ..
SYSTEM DESCRIPTION . . . . . . . ..
COMPONENT PARTS . . . . . . . . . .
Component Parts Location . . . . . . . . . ....
Component Description . . . . . . . . . . .....
SYSTEM . . . . . . . . . . . . . . . .
System Diagram . . . . . . . . . . . . . ..
System Description . . . . . . . . . . . . .
DIAGNOSIS SYSTEM (AIR BAG) . . . . . .
Description . . . . . . . . . . . . . . . ..
On Board Diagnosis Function . . . . . . . . .
CONSULT Function . . . . . . . . . . . .
DIAGNOSIS SYSTEM (OCCUPANT DETEC-
TION SYSTEM) . . . . . . . . . . . . ..
CONSULT Function . . . . . . . . . . . .
ECU DIAGNOSIS INFORMATION . . . ..
DIAGNOSIS SENSOR UNIT . . . . . . . ..
DTC Index . . . . . . . . . . . . . . . ..
WIRING DIAGRAM . . . . . . . . . ..
SRS AIR BAG SYSTEM . . . . . . . . . .
Wiring Diagram . . . . . . . . . . . . . ...
BASIC INSPECTION . . . . . . . . ...
DIAGNOSIS AND REPAIR WORK FLOW . .
Work Flow . . . . . . . . . . . . . . . ...
INSPECTION AND ADJUSTMENT . . . . ..
ADDITIONAL SERVICE WHEN REPLACING
CONTROL UNIT . . . . . . . . . . . . . .
ADDITIONAL SERVICE WHEN REPLACING
CONTROL UNIT : Description . . . . . . . . .
ADDITIONAL SERVICE WHEN REPLACING
CONTROL UNIT : Special Repair Requirement . ..
ZERO POINT RESET . . . . . . . . . . . . .
ZERO POINT RESET : Description . . . . . . .
ZERO POINT RESET : Special Repair Require-
ment . . . . . . . . . . . . . . . . . . .
DTC/CIRCUIT DIAGNOSIS . . . . . . .
B1001, B1002, B1003, B1004, B1005 DIAG-
NOSIS SENSOR UNIT . . . . . . . . . ..
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . ...
B1006, B1007, B1008, B1009, B1010 DIAG-
NOSIS SENSOR UNIT . . . . . . . . . ..
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . ...
B1011, B1012, B1013, B1014, B1015 DIAG-
NOSIS SENSOR UNIT . . . . . . . . . ..
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . ...
B1017, B1020, B1021 OCCUPANT SENS C/U
...
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . ...
B1018 OCCUPANT SENS . . . . . . . .
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . ...
B1022 OCCUPANT SENS C/U . . . . . . .
DTC Logic . . . . . . . . . . . . . . . .
Revision: 2013 October
2014 JUKE
SRC-2
Diagnosis Procedure . . . . . . . . . . . ..
B1023 PASSENGER AIR BAG OFF INDICA-
TOR . . . . . . . . . . . . . . . . .
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ..
B1025, B1032, B1048 OCS SENSOR . . . ...
Description . . . . . . . . . . . . . . . ..
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ..
B1026, B1027, B1028, B1029, B1030, B1031
DIAGNOSIS SENSOR UNIT . . . . . . . ..
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ..
B1033, B1034 CRASH ZONE SENSOR . . ...
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ..
B1035 CRASH ZONE SENSOR . . . . . .
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ..
B1036 CRASH ZONE SENSOR . . . . . .
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ..
B1037, B1039, B1041 CRASH ZONE SEN-
SOR . . . . . . . . . . . . . . . . .
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ..
B1042, B1043, B1044, B1045, B1046, B1047
DIAGNOSIS SENSOR UNIT . . . . . . . ..
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ..
B1049, B1054 DRIVER AIR BAG MODULE . .
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ..
B1050, B1055 DRIVER AIR BAG MODULE . .
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ..
B1051, B1056 DRIVER AIR BAG MODULE . .
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ..
B1052, B1057 DRIVER AIR BAG MODULE . .
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ..
B1058, B1059, B1060, B1061, B1062, B1063
DIAGNOSIS SENSOR UNIT . . . . . . . ..
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ..
B1065, B1070 PASSENGER AIR BAG MOD-
ULE . . . . . . . . . . . . . . . . .
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ...
B1066, B1071 PASSENGER AIR BAG MOD-
ULE . . . . . . . . . . . . . . . . .
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ...
B1067, B1072 PASSENGER AIR BAG MOD-
ULE . . . . . . . . . . . . . . . . .
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ...
B1068, B1073 PASSENGER AIR BAG MOD-
ULE . . . . . . . . . . . . . . . . .
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ...
B1074, B1075, B1076, B1077, B1078, B1079
DIAGNOSIS SENSOR UNIT . . . . . . . .
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ...
B1080, B1096 DRIVER AIR BAG MODULE . .
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ...
B1081 SEAT BELT PRE-TENSIONER RH . ...
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ...
B1082 SEAT BELT PRE-TENSIONER RH . ...
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ...
B1083 SEAT BELT PRE-TENSIONER RH . ...
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ...
B1084 SEAT BELT PRE-TENSIONER RH . ...
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ...
B1086 SEAT BELT PRE-TENSIONER LH . ...
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ...
B1087 SEAT BELT PRE-TENSIONER LH . ...
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ...
B1088 SEAT BELT PRE-TENSIONER LH . ...
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ...
B1089 SEAT BELT PRE-TENSIONER LH . ...
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ...
B1090, B1091, B1092, B1093, B1094, B1095
DIAGNOSIS SENSOR UNIT . . . . . . . .
DTC Logic . . . . . . . . . . . . . . . ...
Revision: 2013 October
2014 JUKE
SRC-3
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
Diagnosis Procedure . . . . . . . . . . . ...
B1106, B1107, B1108, B1109, B1110, B1111
DIAGNOSIS SENSOR UNIT . . . . . . . ..
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ...
B1113, B1114 SATELLITE SENSOR RH . . ..
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ...
B1115 SATELLITE SENSOR RH . . . . . ..
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ...
B1116 SATELLITE SENSOR RH . . . . .
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
B1118, B1119 SATELLITE SENSOR LH . .
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
B1120 SATELLITE SENSOR LH . . . . . .
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
B1121 SATELLITE SENSOR LH . . . . . .
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
B1122, B1123, B1124, B1125, B1126, B1127
DIAGNOSIS SENSOR UNIT . . . . . . .
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
B1129 SIDE AIR BAG MODULE RH . . . ...
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
B1130 SIDE AIR BAG MODULE RH . . . ...
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
B1131 SIDE AIR BAG MODULE RH . . . ...
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
B1132 SIDE AIR BAG MODULE RH . . . ...
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
B1134 SIDE AIR BAG MODULE LH . . . ...
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
B1135 SIDE AIR BAG MODULE LH . . . ...
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
B1136 SIDE AIR BAG MODULE LH . . . ...
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
B1137 SIDE AIR BAG MODULE LH . . . ..
DTC Logic . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . .
B1138, B1139, B1140, B1141, B1142, B1143
DIAGNOSIS SENSOR UNIT . . . . . . ...
DTC Logic . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . .
B1144 DIAGNOSIS SENSOR UNIT . . . ...
DTC Logic . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . .
B1145 CURTAIN AIR BAG MODULE RH . ..
DTC Logic . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . .
B1146 CURTAIN AIR BAG MODULE RH . ..
DTC Logic . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . .
B1147 CURTAIN AIR BAG MODULE RH . ..
DTC Logic . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . .
B1148 CURTAIN AIR BAG MODULE RH . ..
DTC Logic . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . .
B1150 CURTAIN AIR BAG MODULE LH . ..
DTC Logic . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . .
B1151 CURTAIN AIR BAG MODULE LH . ..
DTC Logic . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . .
B1152 CURTAIN AIR BAG MODULE LH . ..
DTC Logic . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . .
B1153 CURTAIN AIR BAG MODULE LH . ..
DTC Logic . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . .
B1154, B1155, B1156, B1157, B1158, B1159
DIAGNOSIS SENSOR UNIT . . . . . . ...
DTC Logic . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . .
B1170, B1171, B1172, B1173, B1174, B1175
DIAGNOSIS SENSOR UNIT . . . . . . ...
DTC Logic . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . .
B1186, B1187, B1188, B1189, B1190, B1191
DIAGNOSIS SENSOR UNIT . . . . . . ...
DTC Logic . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . .
Revision: 2013 October
2014 JUKE
SRC-4
B1202, B1203, B1204, B1205, B1206, B1207
DIAGNOSIS SENSOR UNIT . . . . . . .
DTC Logic . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . .
B1209 FRONTAL COLLISION DETECTION ..
Description . . . . . . . . . . . . . . . .
DTC Logic . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . .
B1210 SIDE COLLISION DETECTION . . ...
Description . . . . . . . . . . . . . . . .
DTC Logic . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . .
B1212, B1213, B1214 SATELLITE SENSOR
RH . . . . . . . . . . . . . . . . .
DTC Logic . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . .
B1215, B1216, B1217 SATELLITE SENSOR
LH . . . . . . . . . . . . . . . . . .
DTC Logic . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . .
B1218, B1219, B1220, B1221, B1222, B1223
DIAGNOSIS SENSOR UNIT . . . . . . .
DTC Logic . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . .
B1234, B1235, B1236, B1237, B1238, B1239
DIAGNOSIS SENSOR UNIT . . . . . . .
DTC Logic . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . .
B1336, B1337 SATELLITE SENSOR RH . ...
DTC Logic . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . .
B1338, B1340, B1341, B1342 SATELLITE
SENSOR RH . . . . . . . . . . . . . .
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
B1339 SATELLITE SENSOR RH . . . . . .
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
B1343, B1344 SATELLITE SENSOR LH . .
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
B1345, B1347, B1348, B1349 SATELLITE
SENSOR LH . . . . . . . . . . . . . .
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
B1346 SATELLITE SENSOR LH . . . . . .
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
B1350, B1351 SATELLITE SENSOR . . . ..
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
SYMPTOM DIAGNOSIS . . . . . . ...
SRS AIR BAG WARNING LAMP DOES NOT
TURN OFF . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
SRS AIR BAG WARNING LAMP DOES NOT
TURN ON . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . .
SRS AIR BAG WARNING LAMP BLINKS . ..
Diagnosis Procedure . . . . . . . . . . . .
Revision: 2013 October
2014 JUKE
PRECAUTIONS
SRC-5
< PRECAUTION >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
PRECAUTION
PRECAUTIONS
Precautions for Removing of Battery Terminal
INFOID:0000000010161900
• When removing the 12V battery terminal, turn OFF the ignition
switch and wait at least 30 seconds.
NOTE:
ECU may be active for several tens of seconds after the ignition
switch is turned OFF. If the battery terminal is removed before ECU
stops, then a DTC detection error or ECU data corruption may
occur.
• For vehicles with the 2-batteries, be sure to connect the main bat-
tery and the sub battery before turning ON the ignition switch.
NOTE:
If the ignition switch is turned ON with any one of the terminals of
main battery and sub battery disconnected, then DTC may be
detected.
• After installing the 12V battery, always check "Self Diagnosis Result" of all ECUs and erase DTC.
NOTE:
The removal of 12V battery may cause a DTC detection error.
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"
INFOID:0000000010161906
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the “SRS AIR BAG” and “SEAT BELT” of this
Service Manual.
WARNING:
Always observe the following items for preventing accidental activation.
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision that would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see “SRS AIR BAG”.
• Never use electrical test equipment on any circuit related to the SRS unless instructed to in this Ser-
vice Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or harness
connectors.
PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS
WARNING:
Always observe the following items for preventing accidental activation.
• When working near the Air Bag Diagnosis Sensor Unit or other Air Bag System sensors with the
ignition ON or engine running, never use air or electric power tools or strike near the sensor(s) with
a hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing
serious injury.
• When using air or electric power tools or hammers, always switch the ignition OFF, disconnect the
battery, and wait at least 3 minutes before performing any service.
Service
INFOID:0000000009751705
• Never use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
• Before servicing the SRS, turn ignition switch OFF, disconnect battery negative terminal and wait 3 minutes
or more.
SEF289H
Revision: 2013 October
2014 JUKE
SRC-6
< PRECAUTION >
PRECAUTIONS
For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-
tensioner to deploy. Therefore, never work on any SRS connectors or wires until at least 3 minutes have
passed.
• Diagnosis sensor unit must always be installed with their arrow marks “
⇐
” pointing towards the front of the
vehicle for proper operation. Also check diagnosis sensor unit for cracks, deformities or rust before installa-
tion and replace as required.
• The spiral cable must be aligned with the neutral position since its rotations are limited. Never turn steering
wheel and column after removal of steering gear.
• Handle air bag module carefully. Always place driver and front passenger air bag modules with the pad side
facing upward and seat mounted front side air bag module standing with the stud bolt side facing down.
• Conduct self-diagnosis to check entire SRS for proper function after replacing any components.
• After air bag inflates, the front instrument panel assembly should be replaced if damaged.
• Always replace instrument panel pad following front passenger air bag deployment.
Revision: 2013 October
2014 JUKE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст