Nissan Murano. Manual — part 9
ADP-28
< SYSTEM DESCRIPTION >
AUTOMATIC DRIVE POSITIONER SYSTEM
DETAIL FLOW
Order
Input
Output
Control unit condition
1
Door switch
(Driver side)
—
Driver seat control unit receives door switch signal (driver side/
open) from BCM via CAN communication.
2
—
Motors
(Seat sliding, tilt)
Driver seat control unit operates the seat sliding motor, which recog-
nizes that the driver side door is opened with ignition switch OFF.
Driver seat control unit then requests the operations of tilt motor to
auto drive positioner control unit via UART communication. The au-
tomatic drive positioner control unit operates each motor for a con-
stant amount.
AUTOMATIC DRIVE POSITIONER SYSTEM
ADP-29
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
EXIT ASSIST FUNCTION : Component Parts Location
INFOID:0000000009720644
1.
BCM M118, M119, M122, M123
2.
Automatic drive positioner control unit
M75, M104
3.
Combination meter
4.
Tilt & telescopic switch M102
5.
Key slot M99
6.
Seat memory switch D13
7.
Door mirror remote control switch
D14
8.
Front door switch (driver side) B34
9.
Tilt motor M116
JMJIA1409ZZ
ADP-30
< SYSTEM DESCRIPTION >
AUTOMATIC DRIVE POSITIONER SYSTEM
EXIT ASSIST FUNCTION : Component Description
INFOID:0000000009720645
CONTROL UNITS
INPUT PARTS
Switches
10. Telescopic motor M117
11.
Door mirror (driver side) D3
12. Reclining motor B461
13. Sliding, Lifting switch
(Power seat switch B459)
14. Reclining switch
(Power seat switch B459)
15. Driver seat control unit B451,B452
16. Sliding motor B461
17. Lifting motor (front) B455
18. Lifting motor (rear) B456
A.
Behind the combination meter
B.
View with instrument driver lower
panel removed
C.
View with instrument driver lower
panel removed
D.
View with seat cushion and seatback
pad removed
E.
Backside of the seat cushion
Item
Function
Driver seat control unit
• Main units of automatic drive positioner system
• It is connected to the CAN.
• It communicates with the automatic drive positioner control via UART communi-
cation.
Automatic drive positioner control unit
• It communicates with the driver seat control unit via UART communication.
• Perform various controls with the instructions of driver seat control unit.
• Perform the controls of the tilt & telescopic, door mirror switch.
BCM
Transmit the following status to the driver seat control unit via CAN communication.
• Driver door: OPEN/CLOSE
• Ignition switch position: ACC/ON
• Door lock: UNLOCK (with Intelligent Key or driver side door request switch oper-
ation)
• Key ID
• Key switch: Insert/Pull out Intelligent Key
• Starter: CRANKING/OTHER
• Handle position : LHD
Combination meter / ABS
Transmit the vehicle speed signal to the driver seat control unit via CAN communi-
cation.
TCM
Transmit the shift position signal (P range) to the driver seat control unit via CAN
communication.
Item
Function
Key slot
The key switch is installed to detect the key inserted/removed status.
Front door switch (driver side)
Detect front door (driver side) open/close status.
CVT shift selector (detention switch)
Detect the P range position of selector lever.
Set switch
The registration and system setting can be performed with its operation.
Memory switch 1/2
The registration and operation can be performed with its operation.
Power seat switch
The following switch is installed.
• Reclining switch
• Lifting switch (front)
• Lifting switch (rear)
• Sliding switch
The specific parts can be operated with the operation of each switch.
AUTOMATIC DRIVE POSITIONER SYSTEM
ADP-31
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
Sensors
OUTPUT PARTS
ENTRY ASSIST FUNCTION
Tilt & telescopic switch
The following switch is installed.
• Tilt switch
• Telescopic switch
The specific parts can be operated with the operation of each switch.
Door mirror remote control switch
The following switch is installed.
• Mirror switch
• Changeover switch
The specific parts can be operated with the operation of each switch.
Item
Function
Item
Function
Door mirror sensor
(driver side/passenger side)
Detect the up/down and left/right position of outside mirror face.
Tilt and telescopic sensor
Detect the up/down and left/right position of steering column.
Lifting sensor (front)
Detect the up/down position of seat lifting (front).
Lifting sensor (rear)
Detect the up/down position of seat lifting (rear).
Reclining sensor
Detect the tilt of seatback.
Sliding sensor
Detect the front/rear position of seat.
Item
Function
Door mirror motor
(driver side/passenger side)
Move the outside mirror face upward/downward and leftward/rightward.
Tilt and telescopic motor
Move the steering column upward/downward and frontward/rearward.
Lifting motor (front)
Move the seat lifting (front) upward/downward.
Lifting motor (rear)
Move the seat lifting (rear) upward/downward.
Reclining motor
Tilt and raise up the seatback.
Sliding motor
Slide the seat frontward/rearward.
Memory indicator
Illuminates or flashes according to the registration/operation status.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст