Nissan Murano. Manual — part 801
HA-40
< REMOVAL AND INSTALLATION >
LOW-PRESSURE FLEXIBLE HOSE
LOW-PRESSURE FLEXIBLE HOSE
Exploded View
INFOID:0000000009718642
HA-14, "Refrigerant Connection"
.
Removal and Installation
INFOID:0000000009718643
REMOVAL
1.
Use refrigerant collecting equipment (for HFC-134a) to discharge the refrigerant.
2.
Remove front under cover. Refer to
.
1.
High-pressure pipe
2.
O-ring
3.
Condenser assembly
4.
High-pressure flexible hose
5.
Compressor
6.
Low-pressure flexible hose
7.
Low-pressure pipe
8.
Heater & cooling unit assembly
9.
Evaporator pipe assembly
10. Expansion valve
11.
Evaporator
: Always replace after every disassembly.
: N·m (kg-m, in-lb)
JPIIA1257GB
LOW-PRESSURE FLEXIBLE HOSE
HA-41
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
HA
N
O
P
3.
Remove mounting bolt (A) and then disconnect low-pressure
flexible hose (1) from compressor.
CAUTION:
Cap or wrap the joint of the A/C piping and compressor with
suitable material such as vinyl tape to avoid the entry of air.
4.
Remove mounting bolt (A) and then remove low-pressure flexi-
ble hose (1) from low-pressure pipe (2).
CAUTION:
Cap or wrap the joint of the A/C piping with suitable mate-
rial such as vinyl tape to avoid the entry of air.
INSTALLATION
Note the following items and then install in the reverse order of removal.
CAUTION:
• Replace O-rings with new ones. Then apply compressor oil to them when installing.
• Check for leakages when recharging refrigerant.
JPIIA0532ZZ
JPIIA0533ZZ
HA-42
< REMOVAL AND INSTALLATION >
HIGH-PRESSURE FLEXIBLE HOSE
HIGH-PRESSURE FLEXIBLE HOSE
Exploded View
INFOID:0000000009718644
HA-14, "Refrigerant Connection"
.
Removal and Installation
INFOID:0000000009718645
REMOVAL
1.
Use refrigerant collecting equipment (for HFC-134a) to discharge the refrigerant.
2.
Remove front under cover. Refer to
.
1.
High-pressure pipe
2.
O-ring
3.
Condenser assembly
4.
High-pressure flexible hose
5.
Compressor
6.
Low-pressure flexible hose
7.
Low-pressure pipe
8.
Heater & cooling unit assembly
9.
Evaporator pipe assembly
10. Expansion valve
11.
Evaporator
: Always replace after every disassembly.
: N·m (kg-m, in-lb)
JPIIA1257GB
HIGH-PRESSURE FLEXIBLE HOSE
HA-43
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
HA
N
O
P
3.
Remove mounting bolt (A) and then disconnect high-pressure
flexible hose (1) from compressor.
CAUTION:
Cap or wrap the joint of the A/C piping and compressor with
suitable material such as vinyl tape to avoid the entry of air.
4.
Remove mounting bolt (A) and then remove high-pressure flexi-
ble hose (1) from condenser pipe assembly (2).
CAUTION:
Cap or wrap the joint of the A/C piping with suitable mate-
rial such as vinyl tape to avoid the entry of air.
INSTALLATION
Note the following items and then install in the reverse order of removal.
CAUTION:
• Replace O-rings with new ones. Then apply compressor oil to them when installing.
• Check for leakages when recharging refrigerant.
JPIIA0534ZZ
JPIIA0535ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст