Nissan Murano. Manual — part 1405
TM-162
< PERIODIC MAINTENANCE >
[CVT: RE0F09B]
ROAD TEST
6.
Accelerate vehicle at 2/8 throttle opening and check “Vehicle
Speed When Shifting Gears”.
With CONSULT
-
Read vehicle speed and engine speed. Refer to
cle Speed When Shifting Gears"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Refer to
. GO TO 2.
2.
CHECK VEHICLE SPEED WHEN SHIFTING GEARS (PART 2)
1.
Park vehicle on flat surface.
2.
Move selector lever to “D” position.
3.
Accelerate vehicle at 8/8 throttle opening and check “Vehicle
Speed When Shifting Gears”.
With CONSULT
-
Read vehicle speed and engine speed. Refer to
cle Speed When Shifting Gears"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Refer to
. GO TO 3.
3.
CHECK OVERDRIVE OFF CONDITION (PART 1)
1.
Park vehicle on flat surface.
2.
Push overdrive control switch.
3.
Accelerate vehicle at 2/8 throttle opening and check “Vehicle
Speed When Shifting Gears”.
With CONSULT
-
Read vehicle speed and engine speed. Refer to
cle Speed When Shifting Gears"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Refer to
. GO TO 4.
4.
CHECK OVERDRIVE OFF CONDITION (PART 2)
1.
Park vehicle on flat surface.
2.
Push overdrive control switch.
3.
Accelerate vehicle at 8/8 throttle opening and check “Vehicle
Speed When Shifting Gears”.
With CONSULT
-
Read vehicle speed and engine speed. Refer to
cle Speed When Shifting Gears"
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Refer to
. GO TO 5.
5.
CHECK “L” POSITION FUNCTION (PART 1)
1.
Park vehicle on flat surface.
2.
Move selector lever to “L” position.
SCIA6644E
SCIA4366E
SCIA6644E
SCIA4366E
ROAD TEST
TM-163
< PERIODIC MAINTENANCE >
[CVT: RE0F09B]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
3.
Accelerate vehicle at 2/8 throttle opening and check “Vehicle
Speed When Shifting Gears”.
With CONSULT
-
Read vehicle speed and engine speed. Refer to
cle Speed When Shifting Gears"
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Refer to
. GO TO 6.
6.
CHECK “L” POSITION FUNCTION (PART 2)
1.
Park vehicle on flat surface.
2.
Move selector lever to “L” position.
3.
Accelerate vehicle at 8/8 throttle opening and check “Vehicle
Speed When Shifting Gears”.
With CONSULT
-
Read vehicle speed and engine speed. Refer to
cle Speed When Shifting Gears"
Is the inspection result normal?
YES
>> GO TO 7.
NO
>> Refer to
. GO TO 7.
7.
CHECK ENGINE BRAKE FUNCTION
Check engine brake.
Does engine braking effectively reduce vehicle speed in “L” position?
YES
>> 1.
Stop the vehicle.
2.
Perform “Self Diagnostic Results” in “TRANSMISSION”.
NO
>> Refer to
. Then continue trouble diagnosis.
SCIA6644E
SCIA4366E
TM-164
< PERIODIC MAINTENANCE >
[CVT: RE0F09B]
CVT POSITION
CVT POSITION
Inspection and Adjustment
INFOID:0000000009719571
INSPECTION
1.
Move selector lever to “P” position, and turn ignition switch ON (engine stop).
2.
Check that selector lever can be shifted to other than “P” position when brake pedal is depressed. Also
check that selector lever can be shifted from “P” position only when brake pedal is depressed.
3.
Move selector lever and check for excessive effort, sticking, noise or rattle.
4.
Check that selector lever stops at each position with the feel of engagement when it is moved through all
the positions. Check that the actual position of selector lever matches the position shown by shift position
indicator and manual lever on the transaxle.
5.
The method of operating selector lever to individual positions
correctly should be as shown.
6.
When selector button is pressed in “P”, “R”, “N”, “D” or “L” posi-
tion without applying forward/backward force to selector lever,
check button operation for sticking.
7.
Check that back-up lamps illuminate only when selector lever is
placed in the “R” position.
8.
When in “R” position, check that back-up lamps do not illuminate
even when the selector lever is in the “P” position.
CAUTION:
Check the lighting without pressing shift button.
9.
Check that back-up lamps do not illuminate when selector lever is pushed toward the “R” position when in
the “P” or “N” position.
CAUTION:
Check the lighting without pressing shift button.
10. Check that the engine can only be started with selector lever in the “P” and “N” positions.
11. Check that transaxle is locked completely in “P” position.
ADJUSTMENT
1.
Move selector lever to “ P” position.
CAUTION:
Turn wheels more than 1/4 rotations and apply the park lock.
2.
Loosen the control cable nut.
3.
Place manual lever to “P” position.
CAUTION:
Never apply any force to manual lever.
4.
Tighten the control cable nut. Refer to
.
CAUTION:
Fix manual lever when tightening.
JPDIA0343GB
TCM
TM-165
< REMOVAL AND INSTALLATION >
[CVT: RE0F09B]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
REMOVAL AND INSTALLATION
TCM
Exploded View
INFOID:0000000009719572
Removal and Installation
INFOID:0000000009719573
REMOVAL
CAUTION:
• When replacing TCM and transaxle assembly as a set, replace transaxle assembly first and then
replace TCM. Refer to
.
• When replacing TCM, note the “CVTF DETERIORATION DATE” value displayed on CONSULT “CON-
FORM CVTF DETERIORTN” in MAINTENANCE BOOKLET, before start the operation.
• Before replacing TCM, perform “ADDITIONAL SERVICE WHEN REPLACING TCM”. Refer to
.
• Never impact on TCM when removing or installing TCM.
1.
Disconnect the battery cable from the negative terminal.
2.
Remove air duct (inlet). Refer to
1.
Bracket
2.
TCM
: Vehicle front
Refer to
JPDIA0591GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст