Nissan Murano. Manual — part 12
ADP-40
< SYSTEM DESCRIPTION >
AUTOMATIC DRIVE POSITIONER SYSTEM
INTELLIGENT KEY INTERLOCK FUNCTION : Component Description
INFOID:0000000009720653
CONTROL UNITS
10. Telescopic motor M117
11.
Door mirror (driver side) D3
12. Reclining motor B461
13. Sliding, Lifting switch
(Power seat switch B459)
14. Reclining switch
(Power seat switch B459)
15. Driver seat control unit B451,B452
16. Sliding motor B461
17. Lifting motor (front) B455
18. Lifting motor (rear) B456
A.
Behind the combination meter
B.
View with instrument driver lower
panel removed
C.
View with instrument driver lower
panel removed
D.
View with seat cushion and seatback
pad removed
E.
Backside of the seat cushion
Item
Function
Driver seat control unit
It performs memory function and entry/exit assist function after receiving the door
unlock signal from BCM.
Automatic drive positioner control unit
Operates the steering column and door mirror with the instructions from the driver
seat control unit.
BCM
Recognizes the following status and transmits it to the driver seat control unit via
CAN communication.
• Door lock: UNLOCK
(with Intelligent Key or driver side door request switch)
• Key ID signal
• Ignition switch signal
DIAGNOSIS SYSTEM (DRIVER SEAT CONTROL UNIT)
ADP-41
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
DIAGNOSIS SYSTEM (DRIVER SEAT CONTROL UNIT)
Diagnosis Description
INFOID:0000000009720654
The auto drive positioner system can be checked and diagnosed for component operation with CONSULT.
DIAGNOSTIC MODE
CONSULT Function
INFOID:0000000009720655
SELF-DIAGNOSIS RESULTS
.
DATA MONITOR
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
Diagnostic mode
[AUTO DRIVE POS.]
Description
WORK SUPPORT
Changes the setting of each function.
SELF-DIAG RESULTS
Performs self-diagnosis for the auto drive positioner system and displays the results.
DATA MONITOR
Displays input signals transmitted from various switches and sensors to driver seat con-
trol unit in real time.
CAN DIAG SUPPORT MNTR
The result of transmit/receive diagnosis of CAN communication can be read.
ACTIVE TEST
Drive each output device.
ECU IDENTIFICATION
Displays part numbers of driver seat control unit parts.
Monitor Item
Unit
Main
Signals
Selection
From
Menu
Contents
SET SW
“ON/OFF”
×
×
ON/OFF status judged from the setting switch signal.
MEMORY SW 1
“ON/OFF”
×
×
ON/OFF status judged from the seat memory switch 1 sig-
nal.
MEMORY SW 2
“ON/OFF”
×
×
ON/OFF status judged from the seat memory switch 2 sig-
nal.
SLIDE SW–FR
“ON/OFF”
×
×
ON/OFF status judged from the sliding switch (forward) sig-
nal.
SLIDE SW–RR
“ON/OFF”
×
×
ON/OFF status judged from the sliding switch (backward)
signal.
RECLN SW–FR
“ON/OFF”
×
×
ON/OFF status judged from the reclining switch (forward)
signal.
RECLN SW–RR
“ON/OFF”
×
×
ON/OFF status judged from the reclining switch (backward)
signal.
LIFT FR SW–UP
“ON/OFF”
×
×
ON/OFF status judged from the lifting switch front (up) sig-
nal.
LIFT FR SW–DN
“ON/OFF”
×
×
ON/OFF status judged from the lifting switch front (down)
signal.
LIFT RR SW–UP
“ON/OFF”
×
×
ON/OFF status judged from the lifting switch rear (up) sig-
nal.
LIFT RR SW–DN
“ON/OFF”
×
×
ON/OFF status judged from the lifting switch rear (down)
signal.
MIR CON SW–UP
“ON/OFF”
×
×
ON/OFF status judged from the mirror switch (up) signal.
MIR CON SW–DN
“ON/OFF”
×
×
ON/OFF status judged from the mirror switch (down) signal.
ADP-42
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (DRIVER SEAT CONTROL UNIT)
MIR CON SW–RH
“ON/OFF”
×
×
ON/OFF status judged from the door mirror remote control
switch (passenger side) signal.
MIR CON SW–LH
“ON/OFF”
×
×
ON/OFF status judged from the door mirror remote control
switch (driver side) signal.
MIR CHNG SW–R
“ON/OFF”
×
×
ON/OFF status judged from the door mirror remote control
switch (switching to right) signal.
MIR CHNG SW–L
“ON/OFF”
×
×
ON/OFF status judged from the door mirror remote control
switch (switching to left) signal.
TILT SW-UP
“ON/OFF”
×
×
ON/OFF status judged from the tilt switch (up) signal.
TILT SW-DOWN
“ON/OFF”
×
×
ON/OFF status judged from the tilt switch (down) signal.
TELESCO SW-FR
“ON/OFF”
×
×
ON/OFF status judged from the telescoping switch (for-
ward) signal.
TELESCO SW-RR
“ON/OFF”
×
×
ON/OFF status judged from the telescoping switch (back-
ward) signal.
DETENT SW
“ON/OFF”
×
×
The selector lever position “OFF (P position) / ON (other
than P position)” judged from the detention switch signal.
STARTER SW
“ON/OFF”
×
×
Ignition key switch ON (START, ON) /OFF (ACC, OFF) sta-
tus judged from the ignition switch signal.
SLIDE PULSE
—
–
×
Value (32768) when battery connections are standard. If it
moves backward, the value increases. If it moves forward,
the value decreases.
RECLN PULSE
—
–
×
Value (32768) when battery connections are standard. If it
moves backward, the value increases. If it moves forward,
the value decreases.
LIFT FR PULSE
—
–
×
Value (32768) when battery connections are standard. If it
moves DOWN, the value increases. If it moves UP, the val-
ue decreases.
LIFT RR PULSE
—
–
×
Value (32768) when battery connections are standard. If it
moves DOWN, the value increases. If it moves UP, the val-
ue decreases.
MIR/SEN RH U–D
“V”
–
×
Voltage input from door mirror sensor (passenger side) up/
down is displayed.
MIR/SEN RH R–L
“V”
–
×
Voltage input from door mirror sensor (passenger side) left/
right is displayed.
MIR/SEN LH U–D
“V”
–
×
Voltage input from door mirror sensor (driver side) up/down
is displayed.
MIR/SEN LH R–L
“V”
–
×
Voltage input from door mirror sensor (driver side) left/right
is displayed.
TILT PULSE
—
–
×
Value (32768) when battery connections are standard. If it
moves DOWN, the value increases. If it moves UP, the val-
ue decreases.
TELESCO PULSE
—
–
×
Value (32768) when battery connections are standard. If it
moves backward, the value increases. If it moves forward,
the value decreases.
VEHICLE SPEED
—
×
×
Display the vehicle speed signal received from combination
meter by numerical value [km/h].
P RANG SW CAN
“ON/OFF”
×
×
ON/OFF status judged from the P range switch signal.
R RANGE (CAN)
“ON/OFF”
×
×
ON/OFF status judged from the R range switch signal.
DOOR SW–FL
“ON/OFF”
×
×
ON/OFF status judged from the door switch (front driver
side) signal.
DOOR SW–FR
“ON/OFF”
×
×
ON/OFF status judged from the door switch (front passen-
ger side) signal.
Monitor Item
Unit
Main
Signals
Selection
From
Menu
Contents
DIAGNOSIS SYSTEM (DRIVER SEAT CONTROL UNIT)
ADP-43
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
ACTIVE TEST
CAUTION:
When driving vehicle, do not perform active test.
WORK SUPPORT
IGN ON SW
“ON/OFF”
×
×
ON/OFF status judged from the ignition switch signal.
ACC ON SW
“ON/OFF”
×
×
ON/OFF status judged from the ACC switch signal.
KEY ON SW
“ON/OFF”
×
×
ON/OFF status judged from the key on switch signal.
KEYLESS ID
—
×
×
Key ID status judged from the key ID signal.
KYLS DR UNLK
“ON/OFF”
×
×
ON/OFF status judged from the driver side door unlock ac-
tuator output switch signal.
VHCL SPEED (ABS)
“ON/OFF”
×
×
ON/OFF status judged from vehicle speed signal.
HANDLE
“RHD/LHD”
×
×
RHD/LHD status judged from handle position signal.
TRANSMISSION
“AT or CVT/
MT”
×
×
AT or CVT/MT status judged from transmission.
STEERING STATUS
NOTE:
This item is displayed, but cannot monitored
Monitor Item
Unit
Main
Signals
Selection
From
Menu
Contents
Test item
Description
SEAT SLIDE
Activates/deactivates the sliding motor.
SEAT RECLINING
Activates/deactivates the reclining motor.
SEAT LIFTER FR
Activates/deactivates the lifting motor (front).
SEAT LIFTER RR
Activates/deactivates the lifting motor (rear).
TILT MOTOR
Activates/deactivates the tilt motor.
TELESCO MOTOR
Activates/deactivates the telescopic motor.
MIRROR MOTOR RH
Activates/deactivates the mirror motor (passenger side).
MIRROR MOTOR LH
Activates/deactivates the mirror motor (driver side).
MEMORY SW INDCTR
Turns ON/OFF the memory indicator.
Work item
Content
Item
SEAT SLIDE VOLUME SET
The amount of seat sliding for entry/exit assist can be selected
from 3 items.
40 mm
80 mm
150 mm
EXIT TILT SETTING
Entry/exit assist (steering column) can be selected:
ON (operated) – OFF (not operated)
ON
OFF
EXIT SEAT SLIDE SETTING
Entry/exit assist (seat) can be selected:
ON (operated) – OFF (not operated)
ON
OFF
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст