Nissan Murano. Manual — part 744
EXT-14
< REMOVAL AND INSTALLATION >
FRONT BUMPER
REMOVAL AND INSTALLATION
FRONT BUMPER
Exploded View
INFOID:0000000009720567
JMKIA6536ZZ
FRONT BUMPER
EXT-15
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
Removal and Installation
INFOID:0000000009720568
REMOVAL
CAUTION:
Bumper fascia is made of resin. Do not apply strong force to it, and be careful to prevent contact with
oil.
1.
Fully open hood assembly.
2.
Remove front grille. Refer to
EXT-21, "Removal and Installation"
3.
Remove headlamp extension panel. Refer to
EXL-179, "Removal and Installation"
(for Xenon type) or
EXL-360, "Removal and Installation"
(for Halogen type).
4.
Remove clips (A) of bumper fascia assembly (1) upper side.
5.
Remove fender protector fixing clips (A) (LH/RH).
6.
Remove front under cover and bumper lower finisher (LH/RH). Refer to
.
1.
Radiator core support
2.
Grommet
3.
Bumper fascia assembly
4.
Front fog lamp RH
5.
Bumper lower molding
6.
Head lamp extension panel RH
7.
License plate bracket
8.
Bumper lower finisher RH
9.
Bumper molding RH (With fog lamp)
10. Bumper molding RH (Without fog lamp) 11.
Bumper molding LH (Without fog lamp) 12. Bumper molding LH (With fog lamp)
13. Front fog lamp LH
14.
Bumper lower finisher LH
15. Bumper side bracket LH
16. Bumper stay LH
17.
Bumper stay RH
18. Bumper side bracket RH
19. J nut
20.
Head lamp extension panel LH
21. Bumper reinforcement
22. Energy absorber
23.
Bumper retainer assembly
: Pawl
: Indicates that the part is connected at points with same symbol in actual vehicle.
JMKIA1962ZZ
JMKIA1963ZZ
EXT-16
< REMOVAL AND INSTALLATION >
FRONT BUMPER
7.
Remove bumper fascia assembly fixing bolts (A).
8.
Remove bumper fascia assembly fixing screws (A) (LH/RH).
9.
Disconnect front fog lamp harness connector (LH/RH).
10. Pull the bumper fascia side toward the vehicle side to disengage
the fitting of bumper side bracket and bumper fascia side.
11. Remove bumper fascia assembly.
CAUTION:
When removing bumper fascia assembly, 2 workers are required so as to prevent it from dropping.
12. Remove the following parts after removing bumper fascia assembly.
• Front fog lamp assembly (LH/RH). Refer to
EXL-181, "Removal and Installation"
(for Xenon type) or
EXL-363, "Removal and Installation"
(for Halogen type).
• Bumper side bracket (LH/RH)
• License plate bracket
13. Remove energy absorber.
14. Remove bumper reinforcement mounting nuts, and then remove bumper reinforcement.
15. Remove bumper stay (LH/RH) mounting bolts, and then remove bumper stay (LH/RH).
INSTALLATION
Install in the reverse order of removal.
NOTE:
After installing, perform fitting adjustment.
JMKIA1964ZZ
JMKIA1965ZZ
: Pawl
JMKIA1966ZZ
Portion
Clearance
Front bumper – Front grille
A – A
0.2 – 2.8 mm (0.008 – 0.110 in)
Front bumper – Headlamp extension panel
B – B
0.2 – 2.8 mm (0.008 – 0.110 in)
FRONT BUMPER
EXT-17
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
Front bumper – Headlamp
C – C
0.3 – 2.7 mm (0.012 – 0.106 in)
Front bumper – Front fender
D – D
0.0 – 0.8 mm (0.000 – 0.031 in)
Portion
Clearance
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст