Nissan Murano. Manual — part 1029
MIR-94
< REMOVAL AND INSTALLATION >
[WITHOUT ADP]
OUTSIDE MIRROR
OUTSIDE MIRROR
DOOR MIRROR ASSEMBLY
DOOR MIRROR ASSEMBLY : Exploded View
INFOID:0000000009719378
REMOVAL
DISASSEMBLY
1.
Door mirror assembly
2.
Front door assembly
3.
Door mirror corner cover
4.
Door mirror corner cover
(with BSW indicator)
5.
BSW indicator assembly
: Clip
JMLIA3464ZZ
JMLIA0123ZZ
OUTSIDE MIRROR
MIR-95
< REMOVAL AND INSTALLATION >
[WITHOUT ADP]
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
DOOR MIRROR ASSEMBLY : Removal and Installation
INFOID:0000000009719379
CAUTION:
Never damage the mirror bodies.
REMOVAL
1.
Remove the front door finisher. Refer to
INT-13, "FRONT DOOR FINISHER : Removal and Installation"
.
2.
Disconnect BSW indicator harness connector (with BSW indicator models).
3.
Disengage the fixing clips and remove the door mirror corner cover.
4.
Disconnect the door mirror harness connector.
5.
Remove the door mirror mounting nuts, and remove the door mirror assembly.
INSTALLATION
Install in the reverse order of removal.
GLASS MIRROR
GLASS MIRROR : Exploded View
INFOID:0000000009719380
GLASS MIRROR : Disassembly and Assembly
INFOID:0000000009719381
CAUTION:
Never damage the mirror bodies.
DISASSEMBLY
1.
Door mirror cover
2.
Door mirror assembly
3.
Glass mirror
: Pawl
1.
Door mirror cover
2.
Door mirror assembly
3.
Glass mirror
: Pawl
JMLIA0123ZZ
MIR-96
< REMOVAL AND INSTALLATION >
[WITHOUT ADP]
OUTSIDE MIRROR
1.
Place the glass mirror upward.
2.
Put a strip of protective tape (A) on the housing.
3.
Insert flat-bladed screwdriver (B) into the recess at lower side
between glass mirror (1) and actuator (2), and push up pawls to
remove glass mirror lower side.
NOTE:
Insert a small slotted screwdriver into recess, and push up while
rotating (twist) to make work easier.
4.
Insert flat-bladed screwdriver at RH/LH side between glass mirror and actuator, and push up pawls to
remove glass mirror RH/LH side.
NOTE:
Insert flat-bladed screwdriver into recesses, and push up while rotating (twist) to make work easier.
5.
Remove two terminals of mirror heater attachment. (With heater mirror model)
6.
Pull glass mirror as shown in the figure in order to disengage
both upper pawls, and then remove glass mirror.
ASSEMBLY
Install in the reverse order of removal.
CAUTION:
After installation, visually check that pawls are securely engaged.
DOOR MIRROR COVER
JMLIA0124ZZ
1.
Glass mirror
2.
Actuator
JMLIA0092ZZ
OUTSIDE MIRROR
MIR-97
< REMOVAL AND INSTALLATION >
[WITHOUT ADP]
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
DOOR MIRROR COVER : Exploded View
INFOID:0000000009719382
DOOR MIRROR COVER : Disassembly and Assembly
INFOID:0000000009719383
CAUTION:
Never damage the mirror bodies.
DISASSEMBLY
1.
Remove the glass mirror. Refer to
MIR-95, "GLASS MIRROR : Disassembly and Assembly"
2.
Remove the pawls, and disassemble the door mirror cover from the mirror assembly.
ASSEMBLY
Install in the reverse order of removal.
NOTE:
After installation, visually check that pawls are securely engaged.
1.
Door mirror cover
2.
Door mirror assembly
3.
Glass mirror
: Pawl
JMLIA0123ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст