Nissan Murano. Manual — part 1318

SRC-120

< DTC/CIRCUIT DIAGNOSIS >

[FOR MEXICO]

B0094 CRASH ZONE SENSOR

Diagnosis Procedure

INFOID:0000000009718575

WARNING:

• Before servicing, turn ignition switch OFF, disconnect battery negative terminal, and wait at least 3

minutes or more. (To discharge backup capacitor.)

• Never use unspecified tester or other measuring device.

1.

CHECK DTC

Perform each inspection according to the displayed DTC.

Which DTC is displayed?

[UNMATCH] >>GO TO 4.
Other than the above >>GO TO 2.

2.

CHECK HARNESS CONNECTOR

Check the harness connector.
Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Replace harness connector.

3.

CHECK WIRING HARNESS

Check the wiring harness externals.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Replace wiring harness.

4.

REPLACE CRASH ZONE SENSOR

1.

Replace crash zone. Refer to

SR-51, "Removal and Installation"

.

2.

Perform DTC confirmation procedure. Refer to

SRC-119, "DTC Logic"

.

Is DTC detected?

YES

>> GO TO 5.

NO

>> INSPECTION END

5.

REPLACE AIR BAG DIAGNOSIS SENSOR UNIT

1.

Replace air bag diagnosis sensor unit. Refer to

SR-55, "Removal and Installation"

.

2.

Perform DTC confirmation procedure. Refer to

SRC-119, "DTC Logic"

.

Is DTC detected?

YES

>> GO TO 1.

NO

>> INSPECTION END

B0096 SATELLITE SENSOR

SRC-121

< DTC/CIRCUIT DIAGNOSIS >

[FOR MEXICO]

C

D

E

F

G

I

J

K

L

M

A

B

SRC

N

O

P

B0096 SATELLITE SENSOR

DTC Logic

INFOID:0000000009718576

DTC DETECTION LOGIC

DTC CONFIRMATION PROCEDURE

1.

CHECK SELF-DIAG RESULT

With CONSULT

1.

Turn ignition switch ON.

2.

Perform “Self Diagnostic Result” mode of “AIR BAG” using CONSULT.

Without CONSULT

1.

Turn ignition switch ON.

2.

Check the air bag warning lamp status. Refer to

SRC-91, "On Board Diagnosis Function"

.

NOTE:
SRS does not enter the diagnosis mode if no malfunction is detected in the user mode.

Is malfunctioning part detected?

DTC

CONSULT screen items

(Trouble diagnosis content)

DTC detecting condition

Possible cause

B0096

B-PILLAR SAT SEN RH
[Right Frontal Restraints
Sensor 1(Subfault)]

[RESET]

Reset malfunction of B-pillar satel-
lite sensor RH

• Connection malfunction

of harness or connector

• Internal malfunction of

B-pillar satellite sensor
RH

• Internal malfunction of

air bag diagnosis sensor
unit

[COMM ERR]

Communication malfunction of B-
pillar satellite sensor RH

[OPEN]

B-pillar satellite sensor RH circuit
is open

• Connection malfunction

or open circuit of har-
ness and connector

• Internal malfunction of

B-pillar satellite sensor
RH

• Internal malfunction of

air bag diagnosis sensor
unit

[UNMATCH]

B-pillar satellite sensor RH is out of
the specified specification

Air bag diagnosis sensor
unit and B-pillar satellite
sensor RH is different from
the part specified

[OFFSET ERR]

Offset malfunction of B-pillar satel-
lite sensor RH

• Internal malfunction of

B-pillar satellite sensor
RH

• Internal malfunction of

air bag diagnosis sensor
unit

[SELF-DIAG
ERR]

Diagnosis malfunction of B-pillar
satellite sensor RH

[LOWER LIMIT
ERR]

Lower limit value malfunction of B-
pillar satellite sensor RH

[UPPER LIMIT
ERR]

Upper limit value malfunction of B-
pillar satellite sensor RH

[GND-SHORT]

B-pillar satellite sensor RH circuit
is shorted to ground

• Connection malfunction

or short circuit to ground
of harness and connec-
tor

• Internal malfunction of

B-pillar satellite sensor
RH

• Internal malfunction of

air bag diagnosis sensor
unit

SRC-122

< DTC/CIRCUIT DIAGNOSIS >

[FOR MEXICO]

B0096 SATELLITE SENSOR

YES

>> Refer to

SRC-122, "Diagnosis Procedure"

.

NO

>> INSPECTION END

Diagnosis Procedure

INFOID:0000000009718577

WARNING:

• Before servicing, turn ignition switch OFF, disconnect battery negative terminal, and wait at least 3

minutes or more. (To discharge backup capacitor.)

• Never use unspecified tester or other measuring device.

1.

CHECK DTC

Perform each inspection according to the displayed DTC.
Which DTC is displayed?

[UNMATCH] >>GO TO 4.
Other than the above >>GO TO 2.

2.

CHECK HARNESS CONNECTOR

Check the harness connector.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Replace harness connector.

3.

CHECK WIRING HARNESS

Check the wiring harness externals.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Replace wiring harness.

4.

REPLACE B-PILLAR SATELLITE SENSOR RH

1.

Replace B-pillar satellite sensor RH. Refer to

SR-53, "Removal and Installation"

.

2.

Perform DTC confirmation procedure. Refer to

SRC-121, "DTC Logic"

.

Is DTC detected?

YES

>> GO TO 5.

NO

>> INSPECTION END

5.

REPLACE AIR BAG DIAGNOSIS SENSOR UNIT

1.

Replace air bag diagnosis sensor unit. Refer to

SR-55, "Removal and Installation"

.

2.

Perform DTC confirmation procedure. Refer to

SRC-121, "DTC Logic"

.

Is DTC detected?

YES

>> GO TO 1.

NO

>> INSPECTION END

B0099 SATELLITE SENSOR

SRC-123

< DTC/CIRCUIT DIAGNOSIS >

[FOR MEXICO]

C

D

E

F

G

I

J

K

L

M

A

B

SRC

N

O

P

B0099 SATELLITE SENSOR

DTC Logic

INFOID:0000000009718578

DTC DETECTION LOGIC

DTC CONFIRMATION PROCEDURE

1.

CHECK SELF-DIAG RESULT

With CONSULT

1.

Turn ignition switch ON.

2.

Perform “Self Diagnostic Result” mode of “AIR BAG” using CONSULT.

Without CONSULT

1.

Turn ignition switch ON.

2.

Check the air bag warning lamp status. Refer to

SRC-91, "On Board Diagnosis Function"

.

NOTE:
SRS does not enter the diagnosis mode if no malfunction is detected in the user mode.

Is malfunctioning part detected?

YES

>> Refer to

SRC-124, "Diagnosis Procedure"

.

NO

>> INSPECTION END

DTC

CONSULT screen items

(Trouble diagnosis content)

DTC detecting condition

Possible cause

B0099

SATELLITE SENSOR
[Roll Over Sensor (Sub-
fault)]

[RESET]

Reset malfunction of other satellite
sensor

• Connection malfunction

of harness or connector

• Internal malfunction of

other satellite sensor

• Internal malfunction of

air bag diagnosis sensor
unit

[COMM ERR]

Communication malfunction of
other satellite sensor

[OPEN]

Other satellite sensor circuit is
open

• Connection malfunction

or open circuit of har-
ness and connector

• Internal malfunction of

other satellite sensor

• Internal malfunction of

air bag diagnosis sensor
unit

[UNMATCH]

Other satellite sensor is out of the
specified specification

Air bag diagnosis sensor
unit and other satellite sen-
sor is different from the
part specified

[OFFSET ERR]

Offset malfunction of other satellite
sensor

• Internal malfunction of

other satellite sensor

• Internal malfunction of

air bag diagnosis sensor
unit

[SELF-DIAG
ERR]

Diagnosis malfunction of other sat-
ellite sensor

[LOWER LIMIT
ERR]

Lower limit value malfunction of
other satellite sensor

[UPPER LIMIT
ERR]

Upper limit value malfunction of
other satellite sensor

[GND-SHORT]

Other satellite sensor circuit is
shorted to ground

• Connection malfunction

or short circuit to ground
of harness and connec-
tor

• Internal malfunction of

other satellite sensor

• Internal malfunction of

air bag diagnosis sensor
unit