Nissan Terrano model r20 series 2004. Manual — part 272
19. Check tooth contact.
Refer to Adjustment.
20. Install rear cover and gasket.
21. Install extension tube and differential side shaft assembly.
SPD661
ASSEMBLY (R180A)
Final Drive Housing (Cont’d)
PD-34
YPD013
REAR FINAL DRIVE (C200)
PD-35
Air Breather
Make sure air breather hose is situated as shown in the illustration.
NTF001
REAR FINAL DRIVE (C200)
PD-36
Pre-inspection
Before disassembling final drive, perform the following inspection.
I
Total preload
1) Turn drive pinion in both directions several times to seat bear-
ing rollers correctly.
2) Check total preload with Tool.
Total preload:
1.5 - 2.9 N
⋅
m (15 - 30 kg-cm, 13 - 26 in-lb)
Tool number:
ST3127S000
I
Ring gear to drive pinion backlash
Check backlash of ring gear with a dial indicator at several
points.
Ring gear-to-drive pinion backlash:
0.10 - 0.20 mm (0.0039 - 0.0079 in)
I
Ring gear runout
Check runout of ring gear with a dial indicator.
Runout limit:
0.08 mm (0.0031 in)
I
Tooth contact
Check tooth contact, referring to Adjustment.
I
Side gear to pinion mate gear backlash
Measure clearance between side gear thrust washer and dif-
ferential case with a feeler gauge.
Clearance between side gear thrust washer and differ-
ential case:
0.10 - 0.20 mm (0.0039 - 0.0079 in)
SPD149
SPD246
SPD247
SPD004
DISASSEMBLY (C200)
PD-37
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст