Nissan Terrano model r20 series 2004. Manual — part 386

LOW BEAM

1. Turn headlamp low beam on.
2. Use aiming adjusters to perform aiming adjustment with screw

driver

!

as shown in figures.

I

First tighten the adjusting screws all the way and then
make adjustment by loosening the screws.

I

Adjust headlamps so that main axis of light is parallel to
center line of body and is aligned with point P shown in
illustration.

I

Figure to the left shows headlamp aiming pattern for driv-
ing on right side of road; for driving on left side of road,
aiming pattern is reversed.

I

Dotted lines to point P in illustration show center of head-
lamp.
“H”: Horizontal center line of headlamps
“W

L

”: Distance between each headlamp center

“L”: 5,000 mm (196.85 in)
“C”: 65 mm (2.56 in)

NEL619

NEL620

NEL621

SEL254I

HEADLAMP

Aiming Adjustment (Cont’d)

EL-48

Wiring Diagram — TAIL/L —

LHD MODELS

YEL071D

EXTERIOR LAMP

EL-49

RHD MODELS

YEL072D

EXTERIOR LAMP

Wiring Diagram — TAIL/L — (Cont’d)

EL-50

YEL073D

EXTERIOR LAMP

Wiring Diagram — TAIL/L — (Cont’d)

EL-51