Nissan Terrano model r20 series 2004. Manual — part 401
RHD MODELS
YEL771E
WARNING LAMPS AND CHIME
Wiring Diagram — WARN — (Cont’d)
EL-108
RHD MODELS
YEL772E
WARNING LAMPS AND CHIME
Wiring Diagram — WARN — (Cont’d)
EL-109
Electrical Components Inspection
DIODE CHECK
I
Check continuity using an ohmmeter.
I
Diode is functioning properly if test results are as shown in the
figure at left.
I
Check diodes at the combination meter harness connector
instead of on the combination meter assembly. Refer to “Warn-
ing Lamp/Wiring Diagram”, EL-100.
NOTE:
Specification may vary depending on the type of tester. Before
performing this inspection, be sure to refer to the instruction
manual for the tester to be used.
Oil Pressure Switch Check
Check the continuity between the terminals of oil pressure switch
and body ground.
Oil pressure
kPa (bar, kg/cm
2
, psi)
Continuity
Engine start
More than 10 - 20 (0.10
- 0.20, 0.1 - 0.2, 1.4 -
2.8)
NO
Engine stop
Less than 10 - 20 (0.10 -
0.20, 0.1 - 0.2, 1.4 - 2.8)
YES
SEL901F
SEL748K
WARNING LAMPS AND CHIME
EL-110
Wiring Diagram — CHIME —
YEL773E
WARNING LAMPS AND CHIME
EL-111
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст