Nissan Terrano model r20 series 2004. Manual — part 346
YBT079
WINDSHIELD AND WINDOWS
Removal and Installation (Cont’d)
BT-44
DRYING TIME FOR SEALANT
I
Reference: Time required for sealant to dry to desired hardness.
CAUTION:
Advise the user of the fact that vehicle should not be driven on rough roads or surfaces until sealant
has properly vulcanized.
Unit: days
Relative humidity
%
Temperature °C (°F)
Windshield and Rear window
Back door window
90
50
25
90
50
25
40 (104)
1.5
2.5
5.0
1.5
2.5
5.5
25 (77)
2.5
4.0
7.5
2.5
4.5
8.5
5 (41)
5.0
13.0
20.5
5.5
14.0
22.0
REPAIRING WATER LEAKS FOR WINDSHIELD
Leaks can be repaired without removing and reinstalling glass.
If water is leaking between the urethane adhesive material and
body or glass, determine the extent of leakage. This can be
done by applying water to the windshield area while pushing
glass outward.
To stop the leak, apply primer (if necessary) and then urethane
adhesive to the leak point.
SBF543B
WINDSHIELD AND WINDOWS
Removal and Installation (Cont’d)
BT-46
BACK DOOR WINDOW
I
Window glass is held in place by weatherstrip. Refer to
“EXTERIOR”, BT-21.
I
Apply sealer to clearances between vehicle body panel and
weatherstrip as necessary.
EBF030
WINDSHIELD AND WINDOWS
Removal and Installation (Cont’d)
BT-47
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст