Nissan Terrano model r20 series 2004. Manual — part 8
Function and System Application
Diagnostic
test mode
Function
ENGINE
A/T
Air bag
ABS
NATS*1
Self-diagnostic results
Self-diagnostic results can be read and erased quickly.
x
x
x
x
x
ECU discriminated No.
Classification number of a replacement ECU can be
read to prevent an incorrect ECU from being installed.
—
—
x
—
—
Data monitor
Input/Output data in the ECM can be read.
x
x
—
x
—
Active test
Diagnostic Test Mode in which CONSULT-II drives
some actuators apart from the ECMs and also shifts
some parameters in a specified range.
x
—
—
x
—
ECU (ECM) part number
ECU (ECM) part number can be read.
x
x
—
x
—
Control unit initialisation
All registered ignition key IDs in NATS components can
be initialised and new IDs can be registered.
—
—
—
—
x
Self-function check
ECM checks its own NATS communication interface.
—
—
—
—
x
x: Applicable
*1: NATS: Nissan Anti-Theft System
Nickel Metal Hydride Battery Replacement
CONSULT-II contains a nickel metal hydride battery. When replacing the battery obey the following:
WARNING:
Replace the nickel metal hydride battery with genuine CONSULT-II battery only. Use of another battery
may present a risk of fire or explosion. The battery may present a fire or chemical burn hazard if mis-
treated. Do not recharge, disassemble of dispose of in fire.
Keep the battery out of reach of children and discard used battery conforming to the local regulations.
Checking Equipment
When ordering this equipment, contact your NISSAN distributor.
Tool name
Description
NISSAN CONSULT-II
q
1
CONSULT-II unit and acces-
sories
q
2
Program card
AED03E for diagnosis,
AEN02C-1 for NATS
To confirm the best combination
of these softwares, refer to
CONSULT-II Operation Manual.
YGI004
NOTE:
I
The CONSULT-II must be used in conjunction with a program card.
CONSULT-II does not require loading (Initialisation) procedure.
I
Be sure the CONSULT-II is turned off before installing or removing a program card.
CONSULT-II CHECKING SYSTEM
GI-26
Model Variation
Body
Grade
Engine
Transmission
Group A (RHD)
Group B (South)
Group C (Cen-
tral)
Group D (North)
H/T
SE
“Luxury/
Elegance”
TD27Ti
FS5R30A
KVPNRVF-UED
KVPNLVF-UGD
KVPNLVF-USD
ZD30DDTi
FS5R30A
KWSNRVF-UED
KWSNLVF-UGD
KWSNLVF-USD
RE4R01A
KWSNRVA-UED
KWSNLVA-UGD
KWSNLVA-USD
SR
“Sport”
TD27Ti
FS5R30A
KVPNRUF-UED
KVPNLUF-UGD
KVPNLUF-USD
Wagon
SE
“Luxury/
Elegance”
TD27Ti
FS5R30A
TVPURVF-UED
TVPULVF-UGD
TVPULVF-USD
ZD30DDTi
FS5R30A
TWSURVF-UED
TWSULVF-UGD
TWSULVF-USD
RE4R01A
TWSURVA-UED
TWSULVA-UGD
TWSULVA-USD
SR
“Sport”
TD27Ti
FS5R30A
TVPURUF-UED
TVPULUF-UGD
TVPULUF-USD
Prefix and suffix designations:
K
VP
N
L
V
F
R20
U
G
D
D : 04 model year
E : RHD models
G : South/Central Europe
S : North Europe
U : Turbo
F : 5-speed manual transmission
A : Automatic transmission
U : SR grade
V : SE grade
L : Left-hand drive
R : Right-hand drive
N : 4-wheel drive, short wheelbase
U : 4-wheel drive, long wheelbase
VP : TD27Ti engine
WS : ZD30DDTi engine
K : Hardtop
T : Wagon
IDENTIFICATION INFORMATION
GI-27
Identification Number
VEHICLE IDENTIFICATION NUMBER (Chassis number)
Prefix and suffix designations:
VSK
K
V
N
R20
U
O
XXXXXX
Vehicle serial number
Stopgap (no meaning)
U : Europe
Model
Axle
N : 4-wheel drive, short wheelbase
U : 4-wheel drive, long wheelbase
Engine
V : TD27Ti
W : ZD30DDTi
Body
K : Hardtop
T : Wagon
Manufacturer code
EGI013
IDENTIFICATION INFORMATION
GI-28
IDENTIFICATION PLATE
ENGINE SERIAL NUMBER
AUTOMATIC TRANSMISSION NUMBER
MANUAL TRANSMISSION NUMBER
NGI011
NGI012
SGI137A
SGI760-A
NGI014
IDENTIFICATION INFORMATION
Identification Number (Cont’d)
GI-29
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст