Murano Cross Cabriolet Z51 (2011 year). Manual — part 70
WIPER BLADE
WW-45
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
2.
From portion (A) of wiper refill (1), disengage wiper blade portion
(B) and remove wiper refill in the direction indicated by the arrow
as shown in the figure.
NOTE:
When the vertebra is detached.
• Insert the vertebra (1) into the wiper blade to the same bending
direction.
• If a vertebra has a notch, fit it to a protrusion inside the wiper refill.
JMLIA2254ZZ
JPLIA1586ZZ
Revision: 2012 March
2011 Murano CrossCabriolet
WW-46
< REMOVAL AND INSTALLATION >
FRONT WIPER DRIVE ASSEMBLY
FRONT WIPER DRIVE ASSEMBLY
Exploded View
INFOID:0000000006939373
REMOVAL VIEW
DISASSEMBLY VIEW
Removal and Installation
INFOID:0000000006939374
REMOVAL
1.
Remove front wiper arm. Refer to
WW-42, "Removal and Installation"
.
2.
Remove cowl top cover. Refer to
EXT-20, "Removal and Installation"
.
3.
Remove bolts from the front wiper drive assembly.
1.
Front wiper drive assembly
JPLIA0875ZZ
1.
Front wiper motor
2.
Shaft seal
3.
Front wiper linkage 2
4.
Front wiper frame
5.
Bracket
6.
Front wiper linkage 1
: Multi
−
purpose grease or an equivalent
JPLIA0876ZZ
Revision: 2012 March
2011 Murano CrossCabriolet
FRONT WIPER DRIVE ASSEMBLY
WW-47
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
4.
Disconnect the front wiper motor connector.
5.
Remove front wiper drive assembly from the vehicle.
INSTALLATION
1.
Install the front wiper drive assembly to the vehicle.
2.
Connect the front wiper motor connector.
3.
Operate the front wiper to move it to the auto stop position.
4.
Install the cowl top cover. Refer to
EXT-20, "Removal and Installation"
5.
Install front wiper arms. Refer to
WW-42, "Removal and Installation"
.
Disassembly and Assembly
INFOID:0000000006939375
DISASSEMBLY
1.
Remove the front wiper linkage 1 and 2 from the front wiper drive assembly.
CAUTION:
Never bend the linkage or damage the plastic part of the ball joint when removing the front wiper
linkage.
2.
Remove the front wiper motor mounting screws, and then remove the front wiper motor from the front
wiper frame.
ASSEMBLY
1.
Connect the front wiper motor connector.
2.
Operate the front wiper to move it to the auto stop position.
3.
Disconnect the front wiper motor connector.
4.
Install front wiper motor to front wiper frame.
5.
Install the front wiper linkage 2 to the front wiper motor and the front wiper frame.
6.
Install the front wiper linkage 1 to the front wiper frame.
CAUTION:
• Never drop front wiper motor or cause it to come into contact with other parts.
• Be careful for the grease condition at the front wiper motor and front wiper linkage joint
(retainer). Apply multi
−
purpose grease or an equivalent if necessary.
Revision: 2012 March
2011 Murano CrossCabriolet
WW-48
< REMOVAL AND INSTALLATION >
WIPER AND WASHER SWITCH
WIPER AND WASHER SWITCH
Exploded View
INFOID:0000000006939378
Revision: 2012 March
2011 Murano CrossCabriolet
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст