Juke F15 (2012 year). Service Repair Manual — part 306
PWC-22
< DTC/CIRCUIT DIAGNOSIS >
FRONT POWER WINDOW SWITCH (PASSENGER SIDE)
FRONT POWER WINDOW SWITCH (PASSENGER SIDE)
Component Function Check
INFOID:0000000006290168
1.
CHECK FRONT POWER WINDOW SWITCH (PASSENGER SIDE) FUNCTION
Check front power window motor (passenger side) operation with front power window switch (passenger side).
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000006290169
1.
CHECK FRONT POWER WINDOW SWITCH (PASSENGER SIDE) INPUT SIGNAL
1.
Turn ignition switch OFF.
2.
Disconnect front power window switch (passenger side) connector.
3.
Turn ignition switch ON.
4.
Check voltage between front power window switch (passenger side) harness connector and ground.
(): RHD models
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> GO TO 2.
2.
CHECK FRONT POWER WINDOW SWITCH (PASSENGER SIDE) CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect power window main switch connector.
3.
Check continuity between front power window switch (passenger side) harness connector and power win-
dow main switch harness connector.
4.
Check continuity between front power window switch (passenger side) harness connector and ground.
(): RHD models
Is the inspection result normal?
YES
>> Replace power window main switch.
NO
>> Repair or replace harness.
3.
CHECK FRONT POWER WINDOW SWITCH (PASSENGER SIDE)
(+)
(-)
Condition
Voltage (V)
Front power window switch (passenger side)
Connector
Terminal
D10 (D26)
2 (12)
Ground
Power window main
switch
(passenger side)
NEUTRAL
0 – 1
UP
9 – 16
3 (11)
NEUTRAL
0 – 1
DOWN
9 – 16
Front power window switch (passenger side)
Power window main switch
Continuity
Connector
Terminal
Connector
Terminal
D10 (D26)
2 (12)
D35 (D5)
16
Existed
3 (11)
2
Front power window switch (passenger side)
Ground
Continuity
Connector
Terminal
D10 (D26)
2 (12)
Not existed
3 (11)
FRONT POWER WINDOW SWITCH (PASSENGER SIDE)
PWC-23
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
Check front power window switch (passenger side).
Refer to
PWC-23, "Component Inspection"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Replace front power window switch (passenger side).
4.
CHECK INTERMITTENT INCIDENT
GI-42, "Intermittent Incident"
.
>> INSPECTION END
Component Inspection
INFOID:0000000006290170
1.
CHECK FRONT POWER WINDOW SWITCH (PASSENGER SIDE)
1.
Turn ignition OFF.
2.
Disconnect front power window switch (passenger side) connector.
3.
Check front power window switch (passenger side) terminals under the following conditions.
[LHD models]
[RHD models]
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Replace front power window switch (passenger side).
Front power window switch (passenger side)
Condition
Continuity
Terminal
1
5
UP
Existed
3
4
2
5
NEUTRAL
3
4
1
4
DOWN
2
5
Front power window switch (passenger side)
Condition
Continuity
Terminal
8
7
UP
Existed
11
6
11
6
NEUTRAL
12
7
8
6
DOWN
12
7
PWC-24
< DTC/CIRCUIT DIAGNOSIS >
REAR POWER WINDOW SWITCH
REAR POWER WINDOW SWITCH
Component Function Check
INFOID:0000000006290171
1.
CHECK REAR POWER WINDOW SWITCH FUNCTION
Check rear power window motor operation with rear power window switch.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000006290172
1.
CHECK REAR POWER WINDOW SWITCH INPUT SIGNAL
1.
Turn ignition switch OFF.
2.
Disconnect rear power window switch connector.
3.
Turn ignition switch ON.
4.
Check voltage between rear power window switch harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> GO TO 2.
2.
CHECK REAR POWER WINDOW SWITCH CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect power window main switch connector.
3.
Check continuity between rear power window switch harness connector and power window main switch
harness connector.
(): RHD models
4.
Check continuity between rear power window switch harness connector and ground.
(+)
(-)
Condition
Voltage (V)
Rear power window switch
Connector
Terminal
LH
D63
2
Ground
Power window main
switch
(rear LH side)
NEUTRAL
0 – 1
UP
9 – 16
3
NEUTRAL
0 – 1
DOWN
9 – 16
RH
D43
2
Power window main
switch
(rear RH side)
NEUTRAL
0 – 1
UP
9 – 16
3
NEUTRAL
0 – 1
DOWN
9 – 16
Rear power window switch
Power window main switch
Continuity
Connector
Terminal
Connector
Terminal
LH
D63
2
D35 (D5)
9
Existed
3
8
RH
D43
2
7
3
6
REAR POWER WINDOW SWITCH
PWC-25
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
Is the inspection result normal?
YES
>> Replace power window main switch.
NO
>> Repair or replace harness.
3.
CHECK REAR POWER WINDOW SWITCH
Check rear power window switch.
Refer to
PWC-25, "Component Inspection"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Replace rear power window switch.
4.
CHECK INTERMITTENT INCIDENT
GI-42, "Intermittent Incident"
.
>> INSPECTION END
Component Inspection
INFOID:0000000006290173
1.
CHECK REAR POWER WINDOW SWITCH
1.
Turn ignition switch OFF.
2.
Disconnect rear power window switch connector.
3.
Check rear power window switch terminals under the following conditions.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Replace rear power window switch.
Rear power window switch
Ground
Continuity
Connector
Terminal
LH
D63
2
Not existed
3
RH
D43
2
3
Rear power window switch
Condition
Continuity
Terminal
1
5
UP
Existed
3
4
2
5
NEUTRAL
4
3
1
4
DOWN
2
5
PWC-26
< DTC/CIRCUIT DIAGNOSIS >
POWER WINDOW MOTOR
POWER WINDOW MOTOR
DRIVER SIDE
DRIVER SIDE : Component Function Check
INFOID:0000000006290174
1.
CHECK FRONT POWER WINDOW MOTOR (DRIVER SIDE) OPERATION
Check front power window motor (driver side) operation with power window main switch.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Refer to
PWC-26, "DRIVER SIDE : Diagnosis Procedure"
DRIVER SIDE : Diagnosis Procedure
INFOID:0000000006290175
1.
CHECK FRONT POWER WINDOW MOTOR (DRIVER SIDE) INPUT SIGNAL
1.
Turn ignition switch OFF.
2.
Disconnect front power window motor (driver side) connector.
3.
Turn ignition switch ON.
4.
Check voltage between front power window motor (driver side) harness connector and ground.
(): RHD models
Is the inspection result normal?
YES
>> Replace front power window motor (driver side).
NO
>> GO TO 2.
2.
CHECK FRONT POWER WINDOW MOTOR (DRIVER SIDE) CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect power window main switch connector.
3.
Check continuity between front power window motor (driver side) harness connector and power window
main switch harness connector.
4.
Check continuity between front power window motor (driver side) harness connector and ground.
(): RHD models
Is the inspection result normal?
YES
>> Replace power window main switch.
NO
>> Repair or replace harness.
PASSENGER SIDE
(+)
(-)
Condition
Voltage (V)
Front power window motor (driver side)
Connector
Terminal
D37 (D7)
2
Ground
Power window main
switch
(driver side)
NEUTRAL
0 – 1
UP
9 – 16
3
NEUTRAL
0 – 1
DOWN
9 – 16
Front power window motor (driver side)
Power window main switch
Continuity
Connector
Terminal
Connector
Terminal
D37 (D7)
2
D35 (D5)
17
Existed
3
19
Front power window motor (driver side)
Ground
Continuity
Connector
Terminal
D37 (D7)
2
Not existed
3
POWER WINDOW MOTOR
PWC-27
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
PASSENGER SIDE : Component Function Check
INFOID:0000000006290176
1.
CHECK FRONT POWER WINDOW MOTOR (PASSENGER SIDE) OPERATION
Check front power window motor (passenger side) operation with power window main switch or front power
window switch (passenger side).
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Refer to
PWC-27, "PASSENGER SIDE : Diagnosis Procedure"
.
PASSENGER SIDE : Diagnosis Procedure
INFOID:0000000006290177
1.
CHECK FRONT POWER WINDOW MOTOR (PASSENGER SIDE) INPUT SIGNAL
1.
Turn ignition switch OFF.
2.
Disconnect front power window motor (passenger side) connector.
3.
Turn ignition switch ON.
4.
Check voltage between front power window motor (passenger side) harness connector and ground.
(): RHD models
Is the inspection result normal?
YES
>> Replace front power window motor (passenger side).
NO
>> GO TO 2.
2.
CHECK FRONT POWER WINDOW MOTOR (PASSENGER SIDE) CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect front power window switch (passenger side) connector.
3.
Check continuity between front power window motor (passenger side) harness connector and front power
window switch (passenger side) harness connector.
4.
Check continuity between front power window motor (passenger side) harness connector and ground.
(): RHD models
Is the inspection result normal?
YES
>> Replace front power window switch (passenger side).
NO
>> Repair or replace harness.
REAR LH
(+)
(-)
Condition
Voltage (V)
Front power window motor (passenger side)
Connector
Terminal
D16 (D27)
1
Ground
Front power window
switch
(passenger side)
NEUTRAL
0 – 1
UP
9 – 16
3
NEUTRAL
0 – 1
DOWN
9 – 16
Front power window motor (passenger side)
Front power window switch (passenger side)
Continuity
Connector
Terminal
Connector
Terminal
D16 (D27)
1
D10 (D26)
5 (7)
Existed
3
4 (6)
Front power window motor (passenger side)
Ground
Continuity
Connector
Terminal
D16 (D27)
1
Not existed
3
PWC-28
< DTC/CIRCUIT DIAGNOSIS >
POWER WINDOW MOTOR
REAR LH : Component Function Check
INFOID:0000000006290178
1.
CHECK REAR POWER WINDOW MOTOR LH OPERATION
Check rear power window motor LH operation with power window main switch or rear power window switch
LH.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Refer to
PWC-28, "REAR LH : Diagnosis Procedure"
REAR LH : Diagnosis Procedure
INFOID:0000000006290179
1.
CHECK REAR POWER WINDOW MOTOR LH INPUT SIGNAL
1.
Turn ignition switch OFF.
2.
Disconnect rear power window motor LH connector.
3.
Turn ignition switch ON.
4.
Check voltage between rear power window motor LH harness connector and ground.
Is the inspection result normal?
YES
>> Replace rear power window motor LH.
NO
>> GO TO 2.
2.
CHECK REAR POWER WINDOW MOTOR LH CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect rear power window switch LH connector.
3.
Check continuity between rear power window motor LH harness connector and rear power window switch
LH harness connector.
4.
Check continuity between rear power window motor LH connector and ground.
Is the inspection result normal?
YES
>> Replace rear power window switch LH.
NO
>> Repair or replace harness.
REAR RH
REAR RH : Component Function Check
INFOID:0000000006290180
1.
CHECK REAR POWER WINDOW MOTOR RH OPERATION
(+)
(-)
Condition
Voltage (V)
Rear power window motor LH
Connector
Terminal
D67
1
Ground
Rear power win-
dow switch LH
NEUTRAL
0 – 1
DOWN
9 – 16
3
NEUTRAL
0 – 1
UP
9 – 16
Rear power window motor LH
Rear power window switch LH
Continuity
Connector
Terminal
Connector
Terminal
D67
1
D63
4
Existed
3
5
Rear power window motor LH
Ground
Continuity
Connector
Terminal
D67
1
Not existed
3
POWER WINDOW MOTOR
PWC-29
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
Check rear power window motor RH operation with power window main switch or rear power window switch
RH.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Refer to
PWC-29, "REAR RH : Diagnosis Procedure"
.
REAR RH : Diagnosis Procedure
INFOID:0000000006290181
1.
CHECK REAR POWER WINDOW MOTOR RH INPUT SIGNAL
1.
Turn ignition switch OFF.
2.
Disconnect rear power window motor RH connector.
3.
Turn ignition switch ON.
4.
Check voltage between rear power window motor RH harness connector and ground.
Is the inspection result normal?
YES
>> Replace rear power window motor RH.
NO
>> GO TO 2.
2.
CHECK REAR POWER WINDOW MOTOR RH CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect rear power window switch RH connector.
3.
Check continuity between rear power window motor RH harness connector and rear power window switch
RH harness connector.
4.
Check continuity between rear power window motor RH harness connector and ground.
Is the inspection result normal?
YES
>> Replace rear power window switch RH.
NO
>> Repair or replace harness.
(+)
(-)
Condition
Voltage (V)
Rear power window motor RH
Connector
Terminal
D47
1
Ground
Rear power window
switch RH
NEUTRAL
0 – 1
DOWN
9 – 16
3
NEUTRAL
0 – 1
UP
9 – 16
Rear power window motor RH
Rear power window switch RH
Continuity
Connector
Terminal
Connector
Terminal
D47
1
D43
4
Existed
3
5
Rear power window motor RH
Ground
Continuity
Connector
Terminal
D47
1
Not existed
3
PWC-30
< DTC/CIRCUIT DIAGNOSIS >
ENCODER CIRCUIT
ENCODER CIRCUIT
Component Function Check
INFOID:0000000006290182
1.
CHECK ENCODER OPERATION
Check that front driver side door glass perform AUTO UP/DOWN operation normally when power window
main switch is operated.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000006290183
1.
CHECK ENCODER PULSE SIGNAL
1.
Turn ignition switch ON.
2.
Check signal between power window main switch harness connector and ground with oscilloscope.
(): RHD models
Is the inspection result normal?
YES
>> Replace power window main switch.
NO
>> GO TO 2.
2.
CHECK ENCODER SIGNAL CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect power window main switch connector and front power window motor (driver side) connector.
3.
Check continuity between power window main switch harness connector and front power window motor
(driver side) harness connector.
4.
Check continuity between power window main switch harness connector and ground.
(+)
(-)
Signal
(Reference value)
Power window main switch
Connector
Terminal
D35 (D5)
4
Ground
Refer to the following signal
5
JMKIA5210GB
Power window main switch
Front power window motor (driver side)
Continuity
Connector
Terminal
Connector
Terminal
D35 (D5)
4
D37 (D7)
5
Existed
5
4
Power window main switch
Ground
Continuity
Connector
Terminal
D35 (D5)
4
Not existed
5
ENCODER CIRCUIT
PWC-31
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
(): RHD models
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace harness.
3.
CHECK ENCODER POWER SUPPLY
1.
Connect power window main switch connector.
2.
Turn ignition switch ON.
3.
Check voltage between front power window motor (driver side) harness connector and ground.
(): RHD models
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> GO TO 4.
4.
CHECK ENCODER POWER SUPPLY CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect power window main switch connector.
3.
Check continuity between power window main switch harness connector and front power window motor
(driver side) harness connector.
4.
Check continuity between power window main switch harness connector and ground.
(): RHD models
Is the inspection result normal?
YES
>> Replace power window main switch.
NO
>> Repair or replace harness.
5.
CHECK ENCODER GROUND CIRCUIT 1
1.
Turn ignition switch OFF.
2.
Disconnect power window main switch connector.
3.
Check continuity between power window main switch harness connector and front power window motor
(driver side) harness connector.
4.
Check continuity between power window main switch harness connector and ground.
(): RHD models
(+)
(-)
Voltage (V)
Front power window motor (driver side)
Connector
Terminal
D37 (D7)
1
Ground
9 – 16
Power window main switch
Front power window motor (driver side)
Continuity
Connector
Terminal
Connector
Terminal
D35 (D5)
14
D37 (D7)
1
Existed
Power window main switch
Ground
Continuity
Connector
Terminal
D35 (D5)
14
Not existed
Power window main switch
Front power window motor (driver side)
Continuity
Connector
Terminal
Connector
Terminal
D35 (D5)
12
D37 (D7)
6
Existed
Power window main switch
Ground
Continuity
Connector
Terminal
D35 (D5)
12
Not existed
PWC-32
< DTC/CIRCUIT DIAGNOSIS >
ENCODER CIRCUIT
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair or replace harness.
6.
CHECK ENCODER GROUND CIRCUIT 2
1.
Connect power window main switch connector.
2.
Check continuity between power window main switch harness connector and ground.
(): RHD models
Is the inspection result normal?
YES
>> Replace front power window motor (driver side).
NO
>> Replace power window main switch.
Power window main switch
Ground
Continuity
Connector
Terminal
D35 (D5)
12
Existed
NONE OF THE POWER WINDOWS CAN BE OPERATED USING ANY SWITCH
PWC-33
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
SYMPTOM DIAGNOSIS
NONE OF THE POWER WINDOWS CAN BE OPERATED USING ANY
SWITCH
Diagnosis Procedure
INFOID:0000000006290184
1.
CHECK BCM POWER SUPPLY AND GROUND CIRCUIT
Check BCM power supply and ground circuit. Refer to the following.
• With Intelligent Key: Refer to
• Without Intelligent Key: Refer to
BCS-155, "Diagnosis Procedure"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK POWER WINDOW MAIN SWITCH POWER SUPPLY AND GROUND CIRCUIT
Check power window main switch power supply and ground circuit.
Refer to
PWC-18, "POWER WINDOW MAIN SWITCH : Diagnosis Procedure"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
NO
>> GO TO 1.
PWC-34
< SYMPTOM DIAGNOSIS >
DRIVER SIDE POWER WINDOW DOES NOT OPERATE
DRIVER SIDE POWER WINDOW DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000006290185
1.
CHECK FRONT POWER WINDOW MOTOR (DRIVER SIDE)
Check front power window motor (driver side).
Refer to
PWC-26, "DRIVER SIDE : Component Function Check"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
NO
>> GO TO 1.
FRONT PASSENGER SIDE POWER WINDOW DOES NOT OPERATE
PWC-35
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
FRONT PASSENGER SIDE POWER WINDOW DOES NOT OPERATE
WHEN BOTH POWER WINDOW MAIN SWITCH AND FRONT POWER WINDOW
SWITCH ARE OPERATED
WHEN BOTH POWER WINDOW MAIN SWITCH AND FRONT POWER WINDOW
SWITCH ARE OPERATED : Diagnosis Procedure
INFOID:0000000006290186
1.
CHECK FRONT POWER WINDOW SWITCH (PASSENGER SIDE)
Check front power window switch (passenger side).
Refer to
PWC-22, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK FRONT POWER WINDOW MOTOR (PASSENGER SIDE)
Check front power window motor (passenger side).
Refer to
PWC-27, "PASSENGER SIDE : Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
NO
>> GO TO 1.
WHEN FRONT POWER WINDOW SWITCH (PASSENGER SIDE) IS OPERATED
WHEN FRONT POWER WINDOW SWITCH (PASSENGER SIDE) IS OPERATED :
Diagnosis Procedure
INFOID:0000000006290187
1.
CHECK FRONT POWER WINDOW SWITCH (PASSENGER SIDE) POWER SUPPLY AND GROUND CIR-
CUIT
Check front power window switch (passenger side) power supply and ground circuit.
Refer to
PWC-19, "FRONT POWER WINDOW SWITCH (PASSENGER SIDE) : Diagnosis Procedure"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK FRONT POWER WINDOW SWITCH (PASSENGER SIDE)
Check front power window switch (passenger side).
Refer to
PWC-22, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
NO
>> GO TO 1.
WHEN POWER WINDOW MAIN SWITCH IS OPERATED
PWC-36
< SYMPTOM DIAGNOSIS >
FRONT PASSENGER SIDE POWER WINDOW DOES NOT OPERATE
WHEN POWER WINDOW MAIN SWITCH IS OPERATED : Diagnosis Procedure
INFOID:0000000006290188
1.
CHECK FRONT POWER WINDOW SWITCH (PASSENGER SIDE)
Check front power window switch (passenger side).
Refer to
PWC-22, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
NO
>> GO TO 1.
REAR LH SIDE POWER WINDOW DOES NOT OPERATE
PWC-37
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
REAR LH SIDE POWER WINDOW DOES NOT OPERATE
WHEN BOTH POWER WINDOW MAIN SWITCH AND REAR POWER WINDOW
SWITCH LH ARE OPERATED
WHEN BOTH POWER WINDOW MAIN SWITCH AND REAR POWER WINDOW
SWITCH LH ARE OPERATED : Diagnosis Procedure
INFOID:0000000006290189
1.
CHECK REAR POWER WINDOW SWITCH LH
Check rear power window switch LH.
Refer to
PWC-24, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK REAR POWER WINDOW MOTOR LH
Check rear power window motor LH.
Refer to
PWC-28, "REAR LH : Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
NO
>> GO TO 1.
WHEN REAR POWER WINDOW SWITCH LH IS OPERATED
WHEN REAR POWER WINDOW SWITCH LH IS OPERATED : Diagnosis Procedure
INFOID:0000000006290190
1.
CHECK REAR POWER WINDOW SWITCH LH POWER SUPPLY AND GROUND CIRCUIT
Check rear power window switch LH power supply and ground circuit.
Refer to
PWC-20, "REAR POWER WINDOW SWITCH : Diagnosis Procedure"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK REAR POWER WINDOW SWITCH LH
Check rear power window switch LH.
Refer to
PWC-24, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
NO
>> GO TO 1.
WHEN POWER WINDOW MAIN SWITCH IS OPERATED
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст