Nissan Versa Sedan. Manual — part 398
SERVICE DATA AND SPECIFICATIONS (SDS)
EM-127
< SERVICE DATA AND SPECIFICATIONS (SDS)
[HR16DE]
C
D
E
F
G
H
I
J
K
L
M
A
EM
N
P
O
*: Always check with the Parts Department for the latest parts information.
Undersize
Unit: mm (in)
Bearing Oil Clearance
Unit: mm (in)
12
UPR
1.501 - 1.504 (0.0591 - 0.0592)
Brown
Grade and color are different
between upper and lower bear-
ings.
LWR
1.504 - 1.507 (0.0592 - 0.0593)
Green
23
UPR
1.504 - 1.507 (0.0592 - 0.0593)
Green
LWR
1.507 - 1.510 (0.0593 - 0.0594)
Yellow
34
UPR
1.507 - 1.510 (0.0593 - 0.0594)
Yellow
LWR
1.510 - 1.513 (0.0594 - 0.0596)
Blue
56
UPR
1.513 - 1.516 (0.0596 - 0.0597)
Pink
LWR
1.516 - 1.519 (0.0597 - 0.0598)
Purple
Items
Thickness
Crankshaft pin journal diameter
US 0.25 (0.0098)
1.627 - 1.635 (0.0640 - 0.0644)
Grind so that bearing clearance is the specified value.
Connecting rod bearing oil clearance
Standard
0.020 - 0.030 (0.0008 - 0.0012)
Limit
0.10 (0.0039)
EX-1
ENGINE
C
D
E
F
G
H
I
J
K
L
M
SECTION
EX
A
EX
N
O
P
CONTENTS
EXHAUST SYSTEM
PRECAUTION . . . . . . . . . . . ...
PRECAUTIONS . . . . . . . . . . . . ...
PREPARATION . . . . . . . . . . .
PREPARATION . . . . . . . . . . . . ...
Special Service Tools . . . . . . . . . . . ....
Commercial Service Tools . . . . . . . . . ....
PERIODIC MAINTENANCE . . . . . . .
EXHAUST SYSTEM . . . . . . . . . . ...
Inspection . . . . . . . . . . . . . . . . .
REMOVAL AND INSTALLATION . . . .
EXHAUST SYSTEM . . . . . . . . . . ...
Exploded View . . . . . . . . . . . . . . ..
EX-2
< PRECAUTION >
PRECAUTIONS
PRECAUTION
PRECAUTIONS
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"
INFOID:0000000009267429
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SR and SB section of this Service Man-
ual.
WARNING:
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision which would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see the SR section.
• Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or har-
ness connectors.
PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS
WARNING:
• When working near the Airbag Diagnosis Sensor Unit or other Airbag System sensors with the Igni-
tion ON or engine running, DO NOT use air or electric power tools or strike near the sensor(s) with a
hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing
serious injury.
• When using air or electric power tools or hammers, always switch the Ignition OFF, disconnect the
battery, and wait at least 3 minutes before performing any service.
PREPARATION
EX-3
< PREPARATION >
C
D
E
F
G
H
I
J
K
L
M
A
EX
N
P
O
PREPARATION
PREPARATION
Special Service Tools
INFOID:0000000009267430
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Commercial Service Tools
INFOID:0000000009267431
Tool number
(Kent-Moore No.)
Tool name
Description
KV10114400
(J-38365)
Heated oxygen sensor wrench
Loosening or tightening heated oxygen sen-
sor 2
a: 22 mm (0.87 in)
S-NT636
(Kent-Moore No.)
Tool name
Description
( — )
Power tool
Loosening nuts, screws and bolts
(J-43897-18)
(J-43897-12)
Heated oxygen sensor thread cleaner
Reconditioning the exhaust system threads
before installing a new heated oxygen sensor
(Use with anti-seize lubricant shown below.)
A: For zirconia heated oxygen sensor [18
mm (0.71 in) dia.]
B: For titania heated oxygen sensor [12
mm (0.47 in) dia.]
C: Mating surface shave cylinder
D: Flutes
( — )
Anti-seize lubricant (Permatex 133AR
or equivalent meeting MIL specifica-
tion MIL-A-907)
Lubricating heated oxygen sensor thread
cleaner when reconditioning exhaust system
threads
PIIB1407E
JPBIA0238ZZ
AEM489
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст