Nissan Versa Sedan. Manual — part 584
MWI
METER SYSTEM
MWI-35
< WIRING DIAGRAM >
[TYPE A]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
ABNIA3810GB
MWI-36
< WIRING DIAGRAM >
[TYPE A]
METER SYSTEM
ABNIA3811GB
MWI
METER SYSTEM
MWI-37
< WIRING DIAGRAM >
[TYPE A]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
ABNIA3816GB
MWI-38
< BASIC INSPECTION >
[TYPE A]
DIAGNOSIS AND REPAIR WORKFLOW
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORKFLOW
Work Flow
INFOID:0000000009266585
OVERALL SEQUENCE
DETAILED FLOW
1.
CONFIRM SYMPTOM
Confirm symptom or customer complaint.
>> GO TO 2
2.
SELF-DIAGNOSIS OF COMBINATION METER
Perform self-diagnosis of combination meter. Refer to
MWI-18, "Diagnosis Description"
.
Is the inspection result normal?
YES
>> GO TO 3
NO
>> If self-diagnosis will not start, check power supply and ground circuit of combination meter. Refer
to
MWI-44, "COMBINATION METER : Diagnosis Procedure"
. If power supply and ground circuits
are OK, replace combination meter. Refer to
MWI-53, "Removal and Installation"
.
3.
CHECK COMBINATION METER WITH CONSULT
Select “METER/M&A” on CONSULT and perform self-diagnosis of combination meter. Refer to
Is the inspection result normal?
YES
>> Check symptom. GO TO 4.
NO
>> Refer to
.
4.
CHECK SYSTEM OPERATION
Check the combination meter to verify that the repair has been completed successfully.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> GO TO 1
AWNIA2458GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст