Nissan Versa Sedan. Manual — part 207
DLK-146
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
FRONT FENDER
FRONT FENDER
Exploded View
INFOID:0000000009268840
FRONT FENDER
FRONT FENDER : Removal and Installation
INFOID:0000000009268841
CAUTION:
Use a shop cloths to protect the body from being damaged during removal and installation.
REMOVAL
1. Remove fender protector. Refer to
EXT-26, "Removal and Installation"
2. Remove front bumper fascia and bumper side bracket. Refer to
EXT-16, "Removal and Installation"
.
3. Remove front combination lamp. Refer to
EXL-102, "Removal and Installation"
.
4. Remove front door corner finisher. Refer to
INT-15, "Removal and Installation"
5. Remove front fender cover. Refer to
DLK-147, "FENDER COVER : Removal and Installation"
.
6. Remove front fender bolts from front fender.
7. Remove front fender stiffener (2) while carefully pulling upper
portion of front fender (1) away from body.
: Front
8. Remove front fender.
CAUTION:
1.
Front fender cover
2.
Front fender seal
3.
Front fender upper insulator
4.
Front fender
5.
Front fender stiffener
Front
Pawl
JMKIA8150ZZ
JMKIA5633ZZ
FRONT FENDER
DLK-147
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
A viscous urethane foam is installed on the back surface of front fender. When removing the front
fender, be careful to not deform the front fender while performing the procedure and removing the
viscous urethane foam a little at a time.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Adjust the following components as necessary.
- Hood assembly: Refer to
DLK-140, "HOOD ASSEMBLY : Adjustment"
.
- Front door assembly: Refer to
DLK-150, "DOOR ASSEMBLY : Adjustment"
.
• After adjusting, apply touch-up paint (body color) onto the head of the front fender bolts.
FENDER COVER
FENDER COVER : Removal and Installation
INFOID:0000000009268842
REMOVAL
1. Fully open hood assembly.
2. Disengage pawls beginning at the front of the fender cover and
working toward the rear of vehicle and then remove front fender
cover.
CAUTION:
When performing the procedure after removing fender
cover, protect the lower windshield glass with urethane etc.
: Pawl
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• For installation, engage pawls to front fender and cowl top
cover in numerical order shown.
• Install so that there is no clearance between windshield and
cowl top cover.
JMKIA8031ZZ
JMKIA8032ZZ
DLK-148
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
FRONT DOOR
FRONT DOOR
Exploded View
INFOID:0000000009268843
DOOR ASSEMBLY
DOOR ASSEMBLY : Removal and Installation
INFOID:0000000009268844
CAUTION:
• Use two people when removing or installing front door due to its heavy weight
• When removing and installing front door assembly, support the door using a suitable tool.
• Use shops cloths to protect surrounding components from damage during removal and installation
of front door assembly.
REMOVAL
1. Remove front door harness grommet (1) and then pull out the
harness from the vehicle (2).
1.
Front door assembly
2.
Grommet
3.
Striker bolt
4.
Door striker
5.
Bumper rubber
6.
Door check link
7.
Door hinge (lower)
8.
Door hinge (upper)
9.
Grommet (Driver side only)
JMKIA8152GB
JMKIA8070ZZ
FRONT DOOR
DLK-149
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
2. Disconnect the harness connectors (A) from front door assem-
bly.
3. Remove door check link bolt (body side).
4. Remove door hinge nuts (door side) and front door assembly.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Apply anticorrosive agent onto the hinge mating surface.
• After installation, check front door open/close, lock/unlock operation.
• Check door hinge rotating point for poor lubrication. If necessary, apply a suitable multi-purpose
grease.
• After installation, perform the front door adjustment procedure. Refer to
• After adjusting, apply touch-up paint (body color) onto the head of door hinge nuts.
JMKIA8071ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст