Nissan Versa Sedan. Manual — part 22
AV-80
< REMOVAL AND INSTALLATION >
[MID AUDIO]
ROOF ANTENNA
ROOF ANTENNA
Exploded View
INFOID:0000000009266751
Removal and Installation
INFOID:0000000009266752
REMOVAL
1. Remove the headlining. Refer to
INT-29, "Removal and Installation"
.
2. Disconnect the antenna cable.
3. Remove the antenna base nut.
4. Remove the antenna base from the roof panel.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Tighten the antenna base nut to specifications.
• If the antenna base nut is less than the specified torque, it will affect the function of the antenna.
• If the antenna base nut is greater than the specified torque, it will damage the roof panel.
JSNIA4028GB
1.
Antenna mast
2.
Antenna base
AV
STEERING AUDIO CONTROL SWITCH
AV-81
< REMOVAL AND INSTALLATION >
[MID AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
STEERING AUDIO CONTROL SWITCH
Removal and Installation
INFOID:0000000009266753
REMOVAL
1. Remove the steering wheel. Refer to
ST-8, "Removal and Installation"
2. Remove the steering wheel rear finisher.
3. Remove the steering wheel audio control switches screws.
4. Remove the steering wheel audio control switches from the steering wheel.
INSTALLATION
Installation is in the reverse order of removal.
1.
Steering wheel
2.
Steering wheel audio control switches
3.
Driver air bag module
4.
Steering wheel rear finisher
ALNIA1300ZZ
AV-82
< REMOVAL AND INSTALLATION >
[MID AUDIO]
BLUETOOTH® ANTENNA
BLUETOOTH® ANTENNA
Removal and Installation
INFOID:0000000009266754
REMOVAL
1. Remove the rear seat cushion assembly. Refer to
SE-23, "Removal and Installation - Seat Cushion
2. Remove the rear step plate (RH).
3. Remove the rear seatback side assembly (RH).
4. Remove the rear seatback assembly (RH).
5. Remove the trunk floor finisher.
6. Remove the trunk rear finisher.
7. Remove the trunk side finisher (RH).
8. Disconnect the Bluetooth antenna from the bluetooth control unit
(A).
9. Release the four Bluetooth antenna harness clips (B).
10. Release the remaining Bluetooth antenna harness clip (B) and
remove the Bluetooth antenna screw (C).
11. Remove the Bluetooth antenna assembly (1).
INSTALLATION
Installation is in the reverse order of removal.
ALNIA1301ZZ
ALNIA1302ZZ
ALNIA1303ZZ
AV
BLUETOOTH CONTROL UNIT
AV-83
< REMOVAL AND INSTALLATION >
[MID AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
BLUETOOTH CONTROL UNIT
Removal and Installation
INFOID:0000000009266755
REMOVAL
1. Remove the trunk floor finisher.
2. Remove the trunk rear finisher.
3. Remove the trunk side finisher (RH)
4. Disconnect the harness connector (A) from Bluetooth antenna.
5. Disconnect the harness connector (B) from Bluetooth control
unit.
6. Remove the Bluetooth control unit screws (C) and the Bluetooth
control unit (1).
INSTALLATION
Installation is in the reverse order of removal.
ALNIA1304ZZ
ALNIA1305ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст