Nissan Versa Sedan. Manual — part 925
WW-50
< REMOVAL AND INSTALLATION >
WASHER PUMP
WASHER PUMP
Exploded View
INFOID:0000000009269585
Removal and Installation
INFOID:0000000009269586
REMOVAL
1. Remove fender protector. Refer to
EXT-26, "Removal and Installation"
2. Disconnect the harness connector from the washer pump.
3. Remove front washer tube.
4. Remove washer pump from the washer tank assembly.
5. Remove seal from the washer tank assembly.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Do not twist or damage the seal when installing the washer pump.
1.
Washer tank
2.
Front washer tube
3.
Washer pump
4.
Seal
Front
JMLIA2070ZZ
WASHER NOZZLE & TUBE
WW-51
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
WASHER NOZZLE & TUBE
Washer System Layout
INFOID:0000000009269587
1.
Washer nozzle
2.
Washer tube
3.
Washer tank
JMLIA2078ZZ
WW-52
< REMOVAL AND INSTALLATION >
WASHER NOZZLE & TUBE
Exploded View
INFOID:0000000009269588
WASHER NOZZLE
WASHER NOZZLE : Removal and Installation
INFOID:0000000009269589
REMOVAL
1. Remove cowl top cover. Refer to
EXT-24, "Removal and Installation"
.
2. Disconnect washer tube from washer nozzle (1).
3. Place cowl top cover (2) up side down, then release washer
nozzle pawl to remove as shown.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• The spray positions differ, check that left and right nozzles are installed correctly.
• Adjust the nozzle spray pattern. Refer to
WW-53, "WASHER NOZZLE : Inspection and Adjustment"
.
1.
Front washer nozzle (LH)
2.
Front washer nozzle (RH)
3.
Cowl top cover
4.
Front washer tube B
5.
Joint
6.
Front washer tube A
7.
Washer tank assembly
8.
Check valve
9.
Front washer tube C
10. Front washer tube D
AWLIA1878ZZ
JMLIA1325ZZ
WASHER NOZZLE & TUBE
WW-53
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
WASHER NOZZLE : Inspection and Adjustment
INFOID:0000000009269590
INSPECTION
Check valve Inspection
Check that air can pass through the nozzle by blowing into the noz-
zle and that air cannot flow in the opposite direction.
ADJUSTMENT
Washer Nozzle Spray Position Adjustment
Adjust spray positions to match the positions shown.
Unit: mm (in)
JMLIA1326ZZ
1.
Black printed frame line
: Spray area
Passenger side
Driver side
A
B
C
D
E
F
G
H
X
321 (12.64)
343 (13.50)
60 (2.36)
5 (0.20)
60 (2.36)
5 (0.20)
321 (12.64)
343 (13.50)
Y
62 (2.44)
129 (5.08)
80 (3.15)
184 (7.24)
80 (3.15)
184 (7.24)
62 (2.44)
129 (5.08)
JMLIA2069ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст