Nissan Versa Sedan. Manual — part 217
DLK-186
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
OUTSIDE KEY ANTENNA
OUTSIDE KEY ANTENNA
OUTSIDE HANDLE
OUTSIDE HANDLE : Removal and Installation
INFOID:0000000009268890
REMOVAL
1. Remove the outside handle. Refer to
DLK-169, "OUTSIDE HANDLE : Removal and Installation"
.
2. Remove the handle cover screw, handle cover and door antenna.
INSTALLATION
Installation is in the reverse order of removal.
REAR BUMPER
REAR BUMPER : Removal and Installation
INFOID:0000000009268891
REMOVAL
1. Remove the rear bumper fascia. Refer to
EXT-20, "Removal and Installation"
2. Remove clips (A) and the outside key antenna (rear bumper)
(1).
INSTALLATION
Installation is in the reverse order of removal.
MIIB0136E
JMKIA7952ZZ
INTELLIGENT KEY WARNING BUZZER
DLK-187
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
INTELLIGENT KEY WARNING BUZZER
Removal and Installation
INFOID:0000000009268892
REMOVAL
Remove bolt (A) and the Intelligent Key warning buzzer (1).
INSTALLATION
Installation is in the reverse order of removal.
JMKIA7949ZZ
DLK-188
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
REMOTE KEYLESS ENTRY RECEIVER
REMOTE KEYLESS ENTRY RECEIVER
Removal and Installation
INFOID:0000000009268893
REMOVAL
1. Remove the glove box. Refer to
IP-22, "Removal and Installation"
.
2. Remove the remote keyless entry receiver bolt (A).
3. Disconnect the harness connector from remote keyless entry
receiver and remove remote keyless entry receiver (1)
INSTALLATION
Installation is in the reverse order of removal.
JMKIA7947ZZ
INTELLIGENT KEY BATTERY
DLK-189
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
INTELLIGENT KEY BATTERY
Removal and Installation
INFOID:0000000009268894
1. Release the lock knob at the back of the Intelligent Key and remove the mechanical key.
2. Insert a suitable tool (A) wrapped with a cloth into the slit of the
corner and twist it to separate the upper part from the lower part.
CAUTION:
• Do not touch the circuit board or battery terminal.
• The key fob is water-resistant. However, if it does get wet,
immediately wipe it dry.
3. Replace the battery with new one.
4. Align the tips of the upper and lower parts, and then push them
together until it is securely closed.
CAUTION:
• When replacing battery, keep dirt, grease, and other for-
eign materials off the electrode contact area.
• After replacing the battery, check that all Intelligent Key
functions work normally.
PIIB6221E
Battery replacement
:Coin-type lithium battery
(CR2025)
PIIB6222E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст