Nissan Versa Sedan. Manual — part 253
PRECAUTIONS
EC-11
< PRECAUTION >
[HR16DE]
C
D
E
F
G
H
I
J
K
L
M
A
EC
N
P
O
• Do not depress accelerator pedal when starting.
• Immediately after starting, do not rev up engine unnecessar-
ily.
• Do not rev up engine just prior to shutdown.
• When installing C.B. ham radio or a mobile phone, be sure to
observe the following as it may adversely affect electronic
control systems depending on installation location.
- Keep the antenna as far as possible from the electronic con-
trol units.
- Keep the antenna feeder line more than 20 cm (8 in) away
from the harness of electronic controls.
Do not let them run parallel for a long distance.
- Adjust the antenna and feeder line so that the standing-wave
ratio can be kept smaller.
- Be sure to ground the radio to vehicle body.
SEF709Y
SEF708Y
EC-12
< PREPARATION >
[HR16DE]
PREPARATION
PREPARATION
PREPARATION
Special Service Tools
INFOID:0000000009266950
NOTE:
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Commercial Service Tools
INFOID:0000000009266951
Tool number
(Kent-Moore No.)
Tool name
Description
(J-44321)
Fuel pressure gauge kit
Checks fuel pressure
(J-44321-6)
Fuel pressure adapter
Connects fuel pressure gauge to quick connector type
fuel lines.
KV10118400
Fuel tube adapter
Measuring fuel pressure
KV10120000
Fuel tube adapter
LEC642
LBIA0376E
PBIB3043E
JSBIA0410ZZ
PREPARATION
EC-13
< PREPARATION >
[HR16DE]
C
D
E
F
G
H
I
J
K
L
M
A
EC
N
P
O
Tool name
(Kent-Moore No.)
Description
Leak detector
i.e.: (J-41416)
Locates the EVAP leak
EVAP service port adapter
i.e.: (J-41413-OBD)
Applies positive pressure through EVAP service port
Fuel filler cap adapter
i.e.: (MLR-8382)
Checks fuel tank vacuum relief valve opening pressure
Socket wrench
Removes and installs engine coolant temperature sen-
sor
Oxygen sensor thread cleaner
i.e.: (J-43897-18), (J-43897-12)
Reconditioning the exhaust system threads before in-
stalling a new oxygen sensor. Use with anti-seize lubri-
cant shown below.
a: 18 mm diameter with pitch 1.5 mm for Zirconia Ox-
ygen Sensor
b: 12 mm diameter with pitch 1.25 mm for Titania Ox-
ygen Sensor
Anti-seize lubricant
i.e.: (Permatex
TM
133AR or
equivalent meeting MIL specifica-
tion MIL-A-907)
Lubricating oxygen sensor thread cleaning tool when re-
conditioning exhaust system threads.
S-NT703
S-NT704
S-NT815
S-NT705
AEM488
S-NT779
EC-14
< SYSTEM DESCRIPTION >
[HR16DE]
COMPONENT PARTS
SYSTEM DESCRIPTION
COMPONENT PARTS
ENGINE CONTROL SYSTEM
ENGINE CONTROL SYSTEM : Component Parts Location
INFOID:0000000009266952
1.
Mass air flow sensor
(with intake air temperature sensor)
2.
Electric throttle control actuator
(with built in throttle position sensor
and throttle control motor)
3.
EVAP canister purge volume control
solenoid valve
4.
Cooling fan motor
5.
Refrigerant pressure sensor
Refer to
6.
Battery current sensor (with built in
battery temperature sensor
*1
)
*2
7.
ECM
8.
IPDM E/R
Refer to
(WITH I-KEY) or
(WITH-
OUT I-KEY).
JSBIA3600ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст