Nissan Versa Sedan. Manual — part 588

MWI

THE OIL PRESSURE WARNING LAMP DOES NOT TURN OFF

MWI-51

< SYMPTOM DIAGNOSIS >

[TYPE A]

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

THE OIL PRESSURE WARNING LAMP DOES NOT TURN OFF

Description

INFOID:0000000009266614

The oil pressure warning lamp remains on while the engine is running (normal oil pressure).

Diagnosis Procedure

INFOID:0000000009266615

1.

CHECK COMBINATION METER INPUT SIGNAL

1. Start the engine and select METER/M&A on CONSULT.

2. Observe OIL W/L DATA MONITOR and the operation of the oil pressure warning lamp on the combination

meter.

Is the inspection result normal?

YES

>> Perform ECM self-diagnosis. Refer to

EC-61, "CONSULT Function"

.

NO

>> Replace combination meter. Refer to

MWI-53, "Removal and Installation"

.

Component

Condition

CONSULT

Oil pressure warning light

Engine running

OFF

MWI-52

< SYMPTOM DIAGNOSIS >

[TYPE A]

THE LOW WASHER FLUID WARNING CONTINUES DISPLAYING, OR DOES

NOT DISPLAY

THE LOW WASHER FLUID WARNING CONTINUES DISPLAYING, OR
DOES NOT DISPLAY

Description

INFOID:0000000009266616

• The warning is still displayed even after washer fluid is added.

• The warning is not displayed even though the washer tank is empty.

Diagnosis Procedure

INFOID:0000000009266617

1.

CHECK WASHER FLUID LEVEL SWITCH

Perform a unit check for the washer fluid level switch. Refer to

MWI-48, "Component Inspection"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Replace washer fluid level switch. Refer to

WW-49, "Exploded View"

.

2.

CHECK WASHER FLUID LEVEL SWITCH SIGNAL CIRCUIT

Check the washer fluid level switch signal circuit. Refer to

MWI-48, "Diagnosis Procedure"

.

Is the inspection result normal?

YES

>> Replace combination meter. Refer to

MWI-53, "Removal and Installation"

.

NO

>> Repair or replace harness or connector.

MWI

COMBINATION METER

MWI-53

< REMOVAL AND INSTALLATION >

[TYPE A]

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

REMOVAL AND INSTALLATION

COMBINATION METER

Removal and Installation

INFOID:0000000009266618

REMOVAL

1. Disconnect the negative battery terminal. Refer to

PG-63, "Removal and Installation"

.

2. Remove cluster lid A. Refer to

IP-19, "Removal and Installation"

.

3. Remove the combination meter screws.
4. Pull the combination meter straight out to disengage resin clips.

NOTE:

The illustration shows the clip positions on the back of the com-

bination meter.

5. Disconnect the harness connector from the combination meter and remove.

INSTALLATION

Installation is in the reverse order of removal.

JSNIA3895ZZ

MWI-54

< UNIT DISASSEMBLY AND ASSEMBLY >

[TYPE A]

COMBINATION METER

UNIT DISASSEMBLY AND ASSEMBLY

COMBINATION METER

Exploded View

INFOID:0000000009266619

Disassembly and Assembly

INFOID:0000000009266620

DISASSEMBLY

1. Disengage the tabs to separate front cover using a suitable tool.
2. Pull the front cover straight out to remove from the unified meter control unit.

CAUTION:

• Do not touch the display, pointer, the inside of front cover and the printed area of the dial during

the work.

• Keep away from magnetic sources.

• Do not damage the front cover.

ASSEMBLY

Assembly is in the reverse order of disassembly.

CAUTION:

• Do not touch the display, pointer, the inside of front cover and the printed area of the dial during the

work.

• Keep away from magnetic sources.

• Do not damage the front cover.

1.

Unified meter control unit

2.

Front cover

JSNIA2929ZZ