Nissan Versa Sedan. Manual — part 592

MWI

SYSTEM

MWI-67

< SYSTEM DESCRIPTION >

[TYPE B]

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

LOOSE FUEL CAP WARNING

The LOOSE FUEL CAP message will display in the information display when the fuel-filler cap is not tightened

correctly. The message will turn off as soon as the ECM detects the fuel-filler cap is properly tightened. The

ECM provides a loose fuel cap signal to the combination meter via CAN communication lines.

MWI-68

< SYSTEM DESCRIPTION >

[TYPE B]

DIAGNOSIS SYSTEM (COMBINATION METER)

DIAGNOSIS SYSTEM (COMBINATION METER)

Diagnosis Description

INFOID:0000000009266516

COMBINATION METER SELF-DIAGNOSIS MODE

The information display, speedometer and tachometer can be checked in self-diagnosis mode.

STARTING COMBINATION METER SELF-DIAGNOSIS MODE

NOTE:

• Check combination meter power supply and ground circuits if self-diagnosis mode does not start. Refer to

MWI-94, "COMBINATION METER : Diagnosis Procedure"

. Replace combination meter if power supply and

ground circuits are found to be normal and self-diagnosis mode does not start. Refer to

MWI-104, "Removal

and Installation"

.

• Combination meter self-diagnosis mode will function with the ignition switch in ON. Combination meter self-

diagnosis mode will exit upon turning the ignition switch to OFF.

How to Initiate Self-Diagnosis Mode

1. Turn ignition switch ON, press the odo/trip meter switch (1) to “trip A” or “trip B”.
2. Turn ignition switch to OFF.
3. Continue holding the odo/trip meter switch (1) and turn the igni-

tion switch ON.

4. Verify the trip meter displays “0000.0”.
5. Press the meter control switch at least 3 times. (Within 7 sec-

onds after the ignition switch is turned ON).

6. The combination meter self-diagnosis mode is activated.

• Verify all segments of the information display and shift position

indicator (A) for CVT models are displayed.

JSNIA3904ZZ

JSNIA3900ZZ

MWI

DIAGNOSIS SYSTEM (COMBINATION METER)

MWI-69

< SYSTEM DESCRIPTION >

[TYPE B]

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

7. Each meter activates by pressing the meter control switch.

NOTE:

• If any of the meters or gauges is not activated, replace combination meter.

• The figure is reference.

CONSULT Function

INFOID:0000000009266517

APPLICATION ITEMS

CONSULT can display each diagnostic item using the diagnostic test modes shown.

SELF DIAG RESULT

Refer to

MWI-75, "DTC Index"

.

DATA MONITOR

Display Item List

X: Applicable

AWNIA2440ZZ

METER/M&A Diagnosis mode

Description

SELF DIAGNOSTIC RESULT

The combination meter self-diagnosis results.

DATA MONITOR

Displays combination meter input/output data in real time.

SPECIAL FUNCTION

Lighting history of the warning lamp and indicator lamp can be checked.

CAN DIAG SUPPORT MNTR

The result of transmit/receive diagnosis of CAN communication can be read.

Display item [Unit]

MAIN

SIGNALS

Description

SPEED METER
[km/h] or [mph]

X

Displays the value of vehicle speed signal.

SPEED OUTPUT
[km/h] or [mph]

X

Displays the value of vehicle speed signal, which is transmitted to each unit with
CAN communication.

ODO OUTPUT
[km/h or mph]

Displays odometer signal value transmitted to other units via CAN communica-
tion.

TACHO METER
[rpm]

X

Displays the value of engine speed signal, which is input from ECM.

FUEL METER
[L]

X

Displays the fuel level.

W TEMP METER
[

°C] or [°F]

X

Displays the value of engine coolant temperature signal, which is input from ECM.

ABS W/L
[ON/OFF]

Displays [ON/OFF] condition of ABS warning indicator

BRAKE W/L
[ON/OFF]

Displays [ON/OFF] condition of brake warning indicator.

MWI-70

< SYSTEM DESCRIPTION >

[TYPE B]

DIAGNOSIS SYSTEM (COMBINATION METER)

DOOR W/L
[ON/OFF]

Displays [ON/OFF] condition of door warning indicator.

HI-BEAM IND
[ON/OFF]

Displays [ON/OFF] condition of high beam indicator.

TURN IND
[ON/OFF]

Displays [ON/OFF] condition of turn indicator.

LIGHT IND
[ON/OFF]

Displays [ON/OFF] condition of light indicator.

OIL W/L
[ON/OFF]

Displays [ON/OFF] condition of oil pressure warning indicator.

MIL
[ON/OFF]

Displays [ON/OFF] condition of malfunction indicator.

CRUISE IND
[Off]

Displays [ON/OFF] condition of CRUISE indicator.

O/D OFF IND
[ON/OFF]

Displays [ON/OFF] condition of O/D OFF indicator.

FUEL W/L
[ON/OFF]

Displays [ON/OFF] condition of low-fuel warning indicator.

KEY G/Y W/L
[ON/OFF]

Displays [ON/OFF] condition of key warning lamp.

O/D OFF SW
[ON/OFF]

Displays [ON/OFF] condition of O/D OFF switch.

REAR DEF SW
[ON/OFF]

Displays [ON/OFF] condition of rear window defogger switch.

BRAKE SW
[ON/OFF]

Displays [ON/OFF] condition of brake switch.

EPS W/L
[ON/OFF]

Displays [ON/OFF] condition of EPS indicator.

CHAGE W/L
[Off]

Displays [ON/OFF] condition of charge warning indicator.

LCD

Displays the value of Intelligent Key system message indication.

SHIFT IND
[P, R, N, D, L]

Displays shift selector position.

FUEL CAP W/L
[Off]

Displays [ON/OFF] condition of loose fuel cap warning message.

AIR PRES W/L
[ON/OFF]

Displays [ON/OFF] condition of tire pressure warning lamp.

PKB SW
[ON/OFF]

Status of parking brake switch.

BUCKLE SW
[ON/OFF]

Status of seat belt buckle switch (LH).

PASS BUCKLE SW
[ON/OFF]

Status of passenger seat belt buckle switch (RH).

BRAKE OIL SW
[ON/OFF]

Status of brake fluid level switch.

DISTANCE
[km] or [Mi]

Displays distance to empty.

BUZZER
[ON/OFF]

X

Displays [ON/OFF] condition of buzzer.

Display item [Unit]

MAIN

SIGNALS

Description