Nissan Versa Sedan. Manual — part 395
HOW TO SELECT PISTON AND BEARING
EM-115
< UNIT DISASSEMBLY AND ASSEMBLY >
[HR16DE]
C
D
E
F
G
H
I
J
K
L
M
A
EM
N
P
O
Main Bearing Selection Table
Main Bearing Grade Table
Use Undersize Bearing Usage Guide
• When the specified main bearing oil clearance is not obtained with standard size main bearings, use under-
size (US) bearing.
• When using undersize (US) bearing, measure the main bearing inner diameter with bearing installed, and
grind main journal so that the main bearing oil clearance satisfies the standard.
CAUTION:
PBIC3759E
Main Bearing Grade Table
: Refer to
EM-116
< UNIT DISASSEMBLY AND ASSEMBLY >
[HR16DE]
HOW TO SELECT PISTON AND BEARING
In grinding crankshaft main journal to use undersize bearings,
keep fillet (A) [0.8 - 1.2 mm (0.031 - 0.047 in)].
Bearing undersize table:
Refer to
PBIC3263J
SERVICE DATA AND SPECIFICATIONS (SDS)
EM-117
< SERVICE DATA AND SPECIFICATIONS (SDS)
[HR16DE]
C
D
E
F
G
H
I
J
K
L
M
A
EM
N
P
O
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
General Specification
INFOID:0000000009266682
GENERAL SPECIFICATIONS
Valve Timing
Unit: degree
( ): Valve timing control “ON”
Drive Belt
INFOID:0000000009266683
DRIVE BELT
Belt Deflection
*: When engine is cold.
Engine type
HR16DE
Cylinder arrangement
In-line 4
Displacement
cm
3
(cu in)
1,598 (97.51)
Bore and stroke
mm (in)
78.0
× 83.6 (3.071 ×3.291)
Valve arrangement
DOHC
Firing order
1-3-4-2
Number of piston rings
Compression
2
Oil
1
Compression ratio
9.8
Compression pressure
kPa (kg/cm
2
, psi) / 200 rpm
Standard
1,510 (15.4, 219)
Minimum
1,270 (12.95, 184)
Differential limit between cylinders
100 (1.0, 14.5)
Valve timing
: Intake valve
: Exhaust valve
a
b
c
d
e
f
216
228
11 (
−27)
ATDC
59 (-21)
ABDC
-1 (49)
ATDC
37 (-13)
BBDC
JPBIA4228ZZ
Location
Deflection adjustment *
Unit: mm (in)
Used belt
New belt
Limit
After adjusted
Drive belt
With A/C
10 (0.39)
4.9 - 5.2 (0.19 - 0.20)
4.1 - 4.4 (0.16 - 0.17)
Without A/C
9.1 (0.36)
4.3 - 4.7 (0.17 - 0.19)
3.7 - 3.9 (0.14 - 0.15)
Applied pushing force
98 N (10 kg-f, 22 lb-f)
EM-118
< SERVICE DATA AND SPECIFICATIONS (SDS)
[HR16DE]
SERVICE DATA AND SPECIFICATIONS (SDS)
Belt Tension and Frequency
*: When engine is cold.
Spark Plug
INFOID:0000000009266684
SPARK PLUG (PLATINUM-TIPPED TYPE)
*: Always check with the Parts Department for the latest parts information.
Exhaust Manifold
INFOID:0000000009266685
EXHAUST MANIFOLD
Unit: mm (in)
Camshaft
INFOID:0000000009266686
CAMSHAFT
Unit: mm (in)
Location
Tension adjustment *
Unit: N (kg-f,
lb-f)
Frequency adjustment *
Unit: Hz
Used belt
New belt
Used belt
New belt
Limit
After adjusted
Limit
After adjusted
Drive belt
With A/C
350 (35.7, 78.7)
881 - 951
(89.8 - 97.0,
198.1 - 213.8)
1070 - 1138
(109.1 - 116.0,
240.6 - 255.8)
145.5
230.5 - 239.5
254 - 262
Without A/C
876 - 964
(89.3 - 98.3,
196.9 - 216.7)
1064 - 1152
(108.5 - 117.5,
239.2 - 259.0)
162
256.5 - 268.5
282.5 - 293.5
Make
NGK
Standard type*
PLZKAR6A-11
Gap (nominal)
1.1 mm (0.043 in)
Items
Limit
Surface distortion
0.3 (0.012)
Items
Standard
Limit
Camshaft runout [TIR*]
0.02 (0.0008)
0.1 (0.0039)
Camshaft cam height “A”
Intake
41.705 - 41.895 (1.6419 - 1.6494)
41.505 (1.6341)
Exhaust
40.915 - 41.105 (1.6108 - 1.6183)
40.715 (1.6029)
Camshaft journal outer diameter
No. 1
27.935 - 27.955 (1.0998 - 1.1006)
—
No. 2, 3, 4, 5
24.950 - 24.970 (0.9822 - 0.9830)
—
Camshaft bracket inner diameter
No. 1
28.000 - 28.021 (1.1024 - 1.1032)
—
No. 2, 3, 4, 5
25.000 - 25.021 (0.9842 - 0.9850)
—
SEM671
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст