Nissan Versa Sedan. Manual — part 528
IP-16
< REMOVAL AND INSTALLATION >
INSTRUMENT PANEL ASSEMBLY
10. Remove combination switch. Refer to
EXL-107, "Removal and Installation"
.
11. Remove combination meter. Refer to
MWI-104, "Removal and Installation"
(TYPE A) or
(TYPE B).
12. Remove cluster lid C. Refer to
IP-21, "Removal and Installation"
13. Remove audio unit (if equiped), refer to
AV-28, "Removal and Installation"
(BASE AUDIO) or
(MID AUDIO) or remove AV control unit, refer to
(NAVIGATION).
14. Remove A/C control finisher.
a. Remove intake door lever knob (1).
b. Pull left side of A/C control finisher (2) rearward to release left
side metal clips.
: Metal clip
c.
Pull right side of A/C control finisher (2) rearward to release right
side metal clips and remove A/C control finisher.
: Metal clip
15. Remove A/C control. Refer to
HAC-48, "Removal and Installation"
16. Remove glove box assembly. Refer to
IP-22, "Removal and Installation"
17. Remove passenger air bag module. Refer to
SR-17, "Removal and Installation"
.
18. Remove instrument panel assembly.
a. Remove instrument panel assembly screws (A).
b. Disengage the harness (A, B) from the instrument panel assembly at the base of each front pillar.
c.
Remove instrument panel assembly through passenger door opening.
CAUTION:
• Cover shift selector assembly with a shop cloth to prevent damage to instrument panel assem-
bly.
AWJIA0710ZZ
AWJIA0711ZZ
JMJIA6065ZZ
INSTRUMENT PANEL ASSEMBLY
IP-17
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
• When removing instrument panel assembly, two people are required to prevent it from dropping.
19. Removal of the following components is only necessary if replacing the instrument panel assembly.
• Side ventilator grilles (LH/RH): Refer to
VTL-5, "SIDE VENTILATOR GRILLE : Removal and Installa-
• Center ventilator duct LH/RH: Refer to
VTL-6, "CENTER VENTILATOR DUCT : Removal and Installa-
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Do not reuse the steering wheel nut after removal, replace with a new nut.
• Do not reuse the passenger air bag bolts after removal, replace with new bolts.
IP-18
< REMOVAL AND INSTALLATION >
STEERING COLUMN COVERS
STEERING COLUMN COVERS
Removal and Installation
INFOID:0000000009266852
REMOVAL
1. Remove instrument lower panel LH. Refer to
IP-20, "Removal and Installation"
.
2. Remove lower knee protector (LH) bolts and lower knee protector (LH). Refer to
.
3. Remove steering column covers.
a. Remove steering column cover screws (A).
b. Tilt the steering column to the lowest position.
c.
Pull steering column upper cover (1) upward to disengage steer-
ing column upper cover pawls.
: Pawl
d. Remove steering column upper cover.
e. Pull steering column lower cover (2) downward to remove.
INSTALLATION
Installation is in the reverse order of removal.
AWJIA0707ZZ
CLUSTER LID A
IP-19
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
CLUSTER LID A
Removal and Installation
INFOID:0000000009266853
REMOVAL
1. Remove steering column covers. Refer to
IP-18, "Removal and Installation"
.
2. Remove cluster lid C. Refer to
IP-21, "Removal and Installation"
3. Remove cluster lid A.
•
: Pawl
•
: Metal clip
a. Remove combination meter finisher and cluster lid A as an assembly by pulling rearward to release pawls
and metal clips.
b. Separate cluster lid A (2) from combination meter finisher (1) by releasing the metal clips (If necessary).
INSTALLATION
Installation is in the reverse order of removal.
AWJIA0709ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст