Nissan Versa Sedan. Manual — part 124
PARKING BRAKE SWITCH
BRC-89
< DTC/CIRCUIT DIAGNOSIS >
[VDC/TCS/ABS]
C
D
E
G
H
I
J
K
L
M
A
B
BRC
N
O
P
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-53, "Removal and Installation"
(type A) or
(type B).
NO
>> Repair or replace malfunctioning components.
Component Inspection
INFOID:0000000009267653
1.
CHECK PARKING BRAKE SWITCH
1. Turn ignition switch OFF.
2. Disconnect parking brake switch connector.
3. Check continuity between parking brake switch terminal 1 and ground.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Replace parking brake switch. Refer to
.
Combination meter
—
Continuity
Connector
Terminal
M82 (type B)
10
Ground
No
M24 (type A)
37
Parking brake switch terminal
—
Condition
Continuity
1
Ground
Parking brake actuated
Yes
Parking brake released
No
B R C - 9 0
< DTC/CIRCUIT DIAGNOSIS >
[VDC/TCS/ABS]
VDC OFF SWITCH
VDC OFF SWITCH
Component Function Check
INFOID:0000000009267654
1.
CHECK VDC OFF SWITCH OPERATION
Check that VDC OFF indicator lamp in combination meter turns ON/OFF when VDC OFF switch is operated.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Proceed to diagnosis procedure. Refer to
.
Diagnosis Procedure
INFOID:0000000009267655
Regarding Wiring Diagram information, refer to
1.
CONNECTOR INSPECTION
1. Turn ignition switch OFF.
2. Disconnect ABS actuator and electric unit (control unit) and VDC OFF switch connectors.
3. Check connectors and terminals for deformation, disconnection, looseness or damage.
Is the inspection result normal?
YES
>> GO TO 2
NO
>> Repair or replace as necessary.
2.
CHECK VDC OFF SWITCH
Check VDC OFF switch. Refer to
BRC-91, "Component Inspection"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Replace VDC OFF switch. Refer to
BRC-110, "Removal and Installation"
.
3.
CHECK VDC OFF SWITCH SIGNAL
With CONSULT.
1. Connect ABS actuator and electric unit (control unit) and VDC OFF switch connectors.
2. Turn ignition switch ON.
3. In “DATA MONITOR” select “OFF SW” and check VDC OFF switch signal.
Is the inspection result normal?
YES
>> Refer to
.
NO
>> GO TO 4.
4.
CHECK VDC OFF SWITCH CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect ABS actuator and electric unit (control unit) and VDC OFF switch connectors.
3. Check continuity between ABS actuator and electric unit (control unit) connector E33 terminal 15 and
VDC OFF switch connector M34 terminal 1.
4. Check continuity between ABS actuator and electric unit (control unit) connector terminal E33 terminal 15
and ground.
Condition
DATA MONITOR
VDC OFF switch is pressed and released
On
VDC OFF switch is pressed and released again
Off
ABS actuator and electric unit (control unit)
VDC OFF switch
Continuity
Connector
Terminal
Connector
Terminal
E33
15
M34
1
Yes
VDC OFF SWITCH
BRC-91
< DTC/CIRCUIT DIAGNOSIS >
[VDC/TCS/ABS]
C
D
E
G
H
I
J
K
L
M
A
B
BRC
N
O
P
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace malfunctioning components.
5.
CHECK VDC OFF SWITCH GROUND CIRCUIT
Check continuity between VDC OFF switch connector M34 terminal 2 and ground.
Is the inspection result normal?
YES
>> Replace ABS actuator and electric unit (control unit). Refer to
BRC-108, "Removal and Installa-
.
NO
>> Repair or replace malfunctioning components.
Component Inspection
INFOID:0000000009267656
1.
CHECK VDC OFF SWITCH
1. Turn ignition switch OFF.
2. Disconnect VDC OFF switch connector.
3. Check continuity between terminals of VDC OFF switch connector.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Replace VDC OFF switch. Refer to
BRC-110, "Removal and Installation"
ABS actuator and electric unit (control unit)
—
Continuity
Connector
Terminal
E33
15
Ground
No
VDC OFF switch
—
Continuity
Connector
Terminal
M34
2
Ground
Yes
VDC OFF switch terminals
Condition
Continuity
1 – 2
VDC OFF switch pressed
Yes
VDC OFF switch released
No
BRC-92
< DTC/CIRCUIT DIAGNOSIS >
[VDC/TCS/ABS]
ABS WARNING LAMP
ABS WARNING LAMP
Component Function Check
INFOID:0000000009267657
1.
CHECK ABS WARNING LAMP FUNCTION
Check that ABS warning lamp in combination meter turns ON for approximately 2 seconds after ignition switch
is turned ON.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Proceed to diagnosis procedure. Refer to
.
Diagnosis Procedure
INFOID:0000000009267658
1.
PERFORM THE SELF-DIAGNOSIS
With CONSULT.
Perform self diagnostic result.
Are any DTCs detected?
YES
>> Refer to
.
NO
>> GO TO 2.
2.
CHECK COMBINATION METER
Check if indication and operation of combination meter are normal. Refer to
MWI-60, "METER SYSTEM : System Description"
(type B).
Is the inspection result normal?
YES
>> Replace ABS actuator and electric unit (control unit). Refer to
BRC-108, "Removal and Installa-
.
NO
>> Replace combination meter. Refer to
MWI-53, "Removal and Installation"
(type A) or
(type B).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст