Nissan Primera P11. Manual — part 369
Wiring Diagram — NATS —
MODELS BEFORE VIN - P11U0548750 (Type-1)
YEL216C
BATTERY
BATTERY
IGNITION SWITCH
ON or START
FUSE
BLOCK
(J/B)
Refer to EL-POWER.
NATS
SECURITY
INDICATOR
AUDIO
DONGLE
CONTROL UNIT
: With gasoline engine
: With diesel engine
: With GA engine
: With SR engine or
QG engine
: RHD models
: Except
INJECTION
PUMP
TIME
CONTROL
UNIT
REFER TO THE FOLLOWING
FUSE BLOCK - Junction Box (J/B)
FUSE BLOCK - Junction Box (J/B)
FUSE BLOCK - Junction Box (J/B)
FUSE BLOCK - Junction Box (J/B)
FUSE BLOCK - Junction Box (J/B)
NATS (Nissan Anti-Theft System)
EL-343
MODELS AFTER VIN - P11U0548750 (Type-2)
YEL936C
NATS (Nissan Anti-Theft System)
Wiring Diagram — NATS — (Cont’d)
EL-344
System Description
NATS has the following immobiliser functions:
●
This version of NATS has dongle unit to improve its anti-theft performance (RHD models for Europe).
Dongle unit has its own ID which is registered into NATS IMMU. So if dongle unit is replaced, initializa-
tion must be carried out.
●
When malfunction of dongle unit is detected:
The security indicator lamp illuminates for about 15 minutes after ignition switch is turned to ON.
− When dongle unit has a malfunction, and the indicator lamp is illuminated, engine can not be started.
However engine can be started only one time when security indicator lamp turns off in about 15 minutes
after ignition switch is turned to ON.
●
Since only NATS ignition keys, whose ID nos. have been registered into the ECM and IMMU of NATS,
allow the engine to run, operation of a stolen vehicle without a NATS registered key is prevented by
NATS.
That is to say, NATS will immobilize the engine if someone tries to start it without the registered key of
NATS.
●
All of the originally supplied ignition key IDs have been NATS registered.
If requested by the vehicle owner, a maximum of five key IDs can be registered into the NATS compo-
nents.
●
The NATS security indicator (NATS security ind.) blinks when the ignition switch is in “OFF” or “ACC”
position. Therefore, NATS warns outsiders that the vehicle is equipped with the anti-theft system.
●
When NATS detects trouble, the security indicator lamp lights up as follows.
Condition IGN ON and
With dongle
Without dongle
MIL
Security indicator
MIL
Security indicator
NATS malfunction
(except dongle unit) is
detected
—
6 times blinking
Staying ON after igni-
tion switch is turned
ON
—
Staying ON
Only malfunction of
dongle unit is detected.
—
Staying ON for about
15 minutes after igni-
tion switch is turned
ON
—
—
Malfunction of NATS
and engine related
parts are detected.
Staying ON
6 times blinking
Staying ON after igni-
tion switch is turned
ON
Staying ON
Staying ON
Only engine related
part malfunction is
detected.
Staying ON
—
Staying ON
—
Just after initialization
of NATS
—
6 times blinking
—
—
●
NATS trouble diagnoses, system initialisation and additional registration of other NATS ignition key IDs
must be carried out using CONSULT-II hardware and CONSULT-II NATS software.
Regarding the procedures of NATS initialisation and NATS ignition key ID registration, refer to CON-
SULT-II operation manual, NATS.
●
When servicing a malfunction of the NATS (indicated by lighting up of security Indicator Lamp)
or registering another NATS ignition key ID no., it may be necessary to re-register original key
identification. Therefore, be sure to receive all keys and the PIN code from vehicle owner.
NATS (Nissan Anti-Theft System)
EL-345
System Composition
The immobiliser function of the NATS for Nissan model P11 consists of the following:
●
NATS ignition key
●
NATS immobiliser control unit (NATS IMMU), located in the ignition key cylinder
●
Engine control module (ECM)
●
Dongle unit (RHD models for Europe)
●
NATS security indicator
●
NATS audio link
NEL558
NATS ignition key
NATS IMMU
NATS security ind
ECM
DONGLE UNIT
(RHD models for Europe)
AUDIO
NATS (Nissan Anti-Theft System)
EL-346
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст