Nissan Primera P11. Manual — part 553
NST044
49 - 68 (5.0 - 6.9, 28 - 36)
38 - 49
(3.9 - 4.9,
28 - 36)
: N·m (kg-m, ft-lb)
: Do not re-use
Adjuster bolt
Bracket
POWER STEERING OIL PUMP
CD20T
ST-21
NST045
CLIP TO FACE
REARWARDS
49 - 68 (5.0 - 6.9, 28 - 36)
: N·m (kg-m, ft-lb)
: Do not re-use
Align so that white mark on hose
aligns with mark on suction port
Switch
Hose
Adjuster bolt
Bracket
POWER STEERING OIL PUMP
QG16, 18DE
ST-22
General Specifications
Applied model
15
″
tire
16
″
tire
Steering model
Power steering
Steering gear type
PR25T
Steering overall gear ratio
16.7
Turn of steering wheel
(Lock to lock)
2.7
2.6
Steering column type
Tilt / collapsible
Inspection and Adjustment
STEERING WHEEL AND COLUMN
STEERING GEAR
Applied model
Tilt
Steering wheel axial play
mm (in)
0 (0)
Steering wheel play
mm (in)
35 (1.38) or less
Steering column length “L”
mm (in)
536 - 538 (21.10 - 21.18 in)
SST583B
L
Steering gear type
Power PR25T
15” tire
16” tire
Rack stroke “S”
mm (in)
68 (2.68)
66 (2.60)
Pinion rotating torque
N·m (kg-cm, in-lb)
0.8 - 1.3
(8 - 13, 6.9 - 11.3)
Rack sliding force
N (kg, lb)
284 (29, 64) or less
Steering wheel turning force
(Measured at one full turn
from neutral)
N (kg, lb)
44.1 (4.5, 9.9) or less
Fluid capacity (Approximate)
(Imp qt)
0.9 (3/4)
Oil pump relief pressure
kPa (bar, kg/cm
2
, psi)
SR: 7,002 - 7,600, (70 - 76,
71.4 - 77.5, 1,109 - 1,194)
QG: 7,502 - 8,101, (75 - 81,
76.5 - 82,6)
CD: 7,748 - 8,532 (77.5 - 85.3,
79 - 87, 1,123 - 1,237)
NST023
SERVICE DATA AND SPECIFICATIONS (SDS)
ST-23
STEERING LINKAGE
Steering gear type
Power
PR25T
Movement of gear housing
mm (in)
±2 (±0.08) or less
Tie-rod outer ball joint
A
Swinging force at cotter
pin hole
N (kg, lb)
3.3 - 67 (0.34 - 6.8, 0.74 - 15.1)
Rotating torque
N·m (kg-cm, in-lb)
0.15 - 2.4 (1.5 - 30, 1.3 - 26.0)
Axial end play mm (in)
0 (0)
Tie-rod inner ball joint
B
Swinging force*
N (kg, lb)
0.3 - 24.5 (0.03 - 2.5, 0.07 - 5.5)
Axial end play mm (in)
0 (0)
Tie-rod standard length “L”
mm (in)
183.6 (7.23)
*Measuring point
SST588B
SST093B
SERVICE DATA AND SPECIFICATIONS (SDS)
Inspection and Adjustment (Cont’d)
ST-24
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст