Nissan Cube (2014 year). Instruction — part 13

4-56

Center display, heater, air conditioner, audio and phone systems

LIST OF VOICE COMMANDS

When you push and release the

button on

the steering wheel, you can choose from the
commands on the Main Menu. The following
pages describe these commands and the
commands in each sub-menu.

Remember to wait for the tone before
speaking.

You can say “Help” to hear the list of commands
currently available anytime the system is waiting
for a response.

A menu item can also be selected by scrolling
the display with the SEEK switch and entering
by pushing the

button.

If you want to end an action without completing
it, you can say “Cancel” or “Quit” at anytime the
system is waiting for a response. The system will
end the VR session. Whenever the VR session
is cancelled, a double beep is played to indicate
you have exited the system.

If you want to go back to the previous command,
you can say “Go back” or “Correction” anytime

the system is waiting for a response.

Call

(Speak Name)

If there are entries stored in the phonebook, a
number associated with a name and location
can be dialed.

See “Phonebook (phones without automatic
phonebook download function)” (P.4-57) to
learn how to store entries.

When prompted by the system, say the name of
the phonebook entry to call. The system
acknowledges the name.

If there are multiple locations associated with
the name, the system asks the user to choose
the location.

Once the name and location are confirmed, the
system begins the call.

“Phone Number” (speak digits)

When prompted by the system, say the number

to call. Refer to “Making a call by entering a
phone number” (P.4-55) for more details.

“Redial”

Use the Redial command to call the last number
that was dialed.

The system acknowledges the command, re-
peats the number and begins dialing.

If a redial number does not exist, the system
announces, “There is no number to redial” and
ends the VR session.

“Call back”

Use the Call Back command to dial the number
of the last incoming call within the vehicle.

The system acknowledges the command, re-
peats the number and begins dialing.

If a call back number does not exist, the system
announces, “There is no number to call back”
and ends the VR session.

Special Number

To dial more than 10 digits or any special
characters, please say “Special Number”. When
the system acknowledges the command, the
system will prompt you to speak the number.

During a call

During a call there are several command options
available. Push the

button on the steering

wheel to mute the receiving voice and enter

4-56

Center display, heater, air conditioner, audio and phone systems

LIST OF VOICE COMMANDS

When you push and release the

button on

the steering wheel, you can choose from the
commands on the Main Menu. The following
pages describe these commands and the
commands in each sub-menu.

Remember to wait for the tone before
speaking.

You can say “Help” to hear the list of commands
currently available anytime the system is waiting
for a response.

A menu item can also be selected by scrolling
the display with the SEEK switch and entering
by pushing the

button.

If you want to go back to the previous command,
you can say “Go back” or “Correction” anytime

the system is waiting for a response.

Call

(Speak Name)

If there are entries stored in the phonebook, a
number associated with a name and location
can be dialed.

See “Phonebook (phones without automatic
phonebook download function)” (P.4-57) to
learn how to store entries.

When prompted by the system, say the name of
the phonebook entry to call. The system
acknowledges the name.

If there are multiple locations associated with
the name, the system asks the user to choose
the location.

Once the name and location are confirmed, the
system begins the call.

“Phone Number” (speak digits)

When prompted by the system, say the number

to call. Refer to “Making a call by entering a
phone number” (P.4-55) for more details.

“Redial”

Use the Redial command to call the last number
that was dialed.

The system acknowledges the command, re-
peats the number and begins dialing.

If a redial number does not exist, the system
announces, “There is no number to redial” and
ends the VR session.

“Call back”

Use the Call Back command to dial the number
of the last incoming call within the vehicle.

The system acknowledges the command, re-
peats the number and begins dialing.

If a call back number does not exist, the system
announces, “There is no number to call back”
and ends the VR session.

Special Number

To dial more than 10 digits or any special
characters, please say “Special Number”. When
the system acknowledges the command, the
system will prompt you to speak the number.

During a call

During a call there are several command options
available. Push the

button on the steering

wheel to mute the receiving voice and enter

commands.
. “Help” — The system announces the avail-

able commands.

. “Go back/Correction” — The system an-

nounces “Go back,” ends the VR session
and returns to the call.

. “Cancel/Quit” — The system announces

“Cancel,” ends the VR session and returns
to the call.

. “Send/Enter/Call/Dial” — Use the Send

command to enter numbers, “*” or “#”
during a call. For example, if you were
directed to dial an extension by an auto-
mated system:
Say: “Send one two three four.”
The system acknowledges the command
and sends the tones associated with the
numbers. The system then ends the VR
session and returns to the call. Say “star” for
“*”, say “pound” for “#”.

. “Transfer call” — Use the Transfer Call

command to transfer the call from the
Bluetooth

Hands-Free Phone System to

the cellular phone when privacy is desired.
The system announces, “Transfer call. Call
transferred to privacy mode.” The system
then ends the VR session.
To reconnect a call from the cellular phone
to the Bluetooth

Hands-Free Phone sys-

tem, push the

button.

. “Mute” — Use the Mute command to mute

your voice so the other party cannot hear it.
Use the mute command again to unmute
your voice.

NOTE:

If a call is ended or the cellular phone
network connection is lost while the Mute
feature is on, the Mute feature will be reset
to “off” for the next call so the other party
can hear your voice.

Phonebook (phones without automatic
phonebook download function)

“Transfer Entry”

Use the Transfer Entry command to store a new
name in the system.

When prompted by the system, say the name
you would like to give the new entry.

For example, say: “Mary.”

If the name is too long or too short, the system
tells you, then prompts you for a name again.

Also, if the name sounds too much like a name
already stored, the system tells you, then
prompts you for a name again.

The system will ask you to transfer a phone
number stored in the cellular phone’s memory.

To enter a phone number by voice command:

For example, say: “five five five one two one
two.” See “How to say numbers” earlier in this
section for more information.

To transfer a phone number stored in the cellular
phone’s memory:

Say: “Transfer entry.” The system acknowledges
the command and asks you to initiate the
transfer from the phone handset. The new
contact phone number will be transferred from
the cellular phone via the Bluetooth

commu-

nication link.

The transfer procedure varies according to each
cellular phone. See the cellular phone Owner’s
Manual for details. You can also visit www.
nissanusa.com/bluetooth for instructions on
transferring phone numbers from NISSAN re-
commended cellular phones.

The system repeats the number and prompts
you for the next command. When you have
finished entering numbers or transferring an
entry, choose “Store.”

The system confirms the name, location and

Center display, heater, air conditioner, audio and phone systems

4-57

commands.
. “Help” — The system announces the avail-

able commands.

. “Go back/Correction” — The system an-

nounces “Go back,” ends the VR session
and returns to the call.

. “Cancel/Quit” — The system announces

“Cancel,” ends the VR session and returns
to the call.

. “Send/Enter/Call/Dial” — Use the Send

. “Transfer call” — Use the Transfer Call

command to transfer the call from the
Bluetooth

Hands-Free Phone System to

Hands-Free Phone sys-

tem, push the

button.

. “Mute” — Use the Mute command to mute

your voice so the other party cannot hear it.
Use the mute command again to unmute
your voice.

NOTE:

If a call is ended or the cellular phone
network connection is lost while the Mute
feature is on, the Mute feature will be reset
to “off” for the next call so the other party
can hear your voice.

Phonebook (phones without automatic
phonebook download function)

“Transfer Entry”

Use the Transfer Entry command to store a new
name in the system.

When prompted by the system, say the name
you would like to give the new entry.

For example, say: “Mary.”

If the name is too long or too short, the system
tells you, then prompts you for a name again.

Also, if the name sounds too much like a name
already stored, the system tells you, then
prompts you for a name again.

The system will ask you to transfer a phone
number stored in the cellular phone’s memory.

To enter a phone number by voice command:

For example, say: “five five five one two one
two.” See “How to say numbers” earlier in this
section for more information.

To transfer a phone number stored in the cellular
phone’s memory:

commu-

nication link.

The system repeats the number and prompts
you for the next command. When you have
finished entering numbers or transferring an
entry, choose “Store.”

The system confirms the name, location and

Center display, heater, air conditioner, audio and phone systems

4-57

4-58

Center display, heater, air conditioner, audio and phone systems

number.

“Delete Entry”

Use the Delete Entry command to delete one
entry from the phonebook. After the system
acknowledges a command, say the name to
delete or say “List Names” to choose an entry.

“List Names”

Use the List Names command to hear all the
names in the phonebook. The system recites the
phonebook entries but does not include the
actual phone numbers. When playback of the
list is complete, the system returns to the main
menu.

Playback of the list can be stopped at any time
by pushing the

button on the steering

wheel. The system ends the VR session.

Phonebook (phones with automatic
phonebook download function)

NOTE:

Phonebook commands are not available
when the vehicle is moving.

For phones that support automatic download of
the phonebook (PBAP Bluetooth

profile), the

“Phonebook” command is used to manage
entries to the vehicle phonebook. You can say
the name of an entry at this menu to initiate
dialing of that entry.

The phonebook stores up to 1000 names for
each phone paired with the system. Each name
can have up to 4 locations/phone numbers
associated with it.

When a phone is connected to the system, the
phonebook is automatically downloaded to the
vehicle. This feature allows you to access your
phonebook from the Bluetooth system and call
contacts by name. You can record a custom
voice tag for contact names that the system has
difficulty recognizing. For more information see
“Record Name” in this section.

NOTE:

Each phone has its own separate phone-
book. You cannot access Phone A’s phone-
book if you are currently connected with

Phone B.

“List names”

Use the List Names command to hear all the
names and locations in the phone book.

The system recites the phone book entries but
does not include the actual phone numbers.
When the playback of the list is complete, the
system goes back to the main menu.

You can stop the playback of the list at any time
by pressing the

button on the steering

wheel. The system ends the VR session. See the
“Record Name” command in this section for
information about recording custom voice tags
for list entries that the system has difficulty
pronouncing.

“Record name”

The system allows you to record custom voice
tags for contact names in the phonebook that
the vehicle has difficulty recognizing. This
feature can also be used to record voice tags
to directly dial an entry with multiple numbers.
Up to 40 voice tags can be recorded to the
system.

“Next Name”

Use the Next Name command to move the next
name of list.

4-58

Center display, heater, air conditioner, audio and phone systems

number.

“Delete Entry”

Use the Delete Entry command to delete one
entry from the phonebook. After the system
acknowledges a command, say the name to
delete or say “List Names” to choose an entry.

“List Names”

Playback of the list can be stopped at any time
by pushing the

button on the steering

wheel. The system ends the VR session.

Phonebook (phones with automatic
phonebook download function)

NOTE:

Phonebook commands are not available
when the vehicle is moving.

For phones that support automatic download of
the phonebook (PBAP Bluetooth

profile), the

“Phonebook” command is used to manage
entries to the vehicle phonebook. You can say
the name of an entry at this menu to initiate
dialing of that entry.

The phonebook stores up to 1000 names for
each phone paired with the system. Each name
can have up to 4 locations/phone numbers
associated with it.

NOTE:

Each phone has its own separate phone-
book. You cannot access Phone A’s phone-
book if you are currently connected with

Phone B.

“List names”

Use the List Names command to hear all the
names and locations in the phone book.

The system recites the phone book entries but
does not include the actual phone numbers.
When the playback of the list is complete, the
system goes back to the main menu.

You can stop the playback of the list at any time
by pressing the

button on the steering

wheel. The system ends the VR session. See the
“Record Name” command in this section for
information about recording custom voice tags
for list entries that the system has difficulty
pronouncing.

“Record name”

“Next Name”

Use the Next Name command to move the next
name of list.

“Previous Name”

Use the Previous Name command to move the
previous name of list.

Recent Calls

Use the Recent Calls command to access
outgoing, incoming or missed calls.

“Outgoing”

Use the Outgoing command to list the outgoing
calls made from the vehicle.

“Incoming”

Use the Incoming command to list the incoming
calls made from the vehicle.

“Missed”

Use the Missed command to list the missed
calls made to the vehicle that were not
answered.

“Call Back”

Use the Call Back command to dial the number
of the most recently received call.

Connect Phone

NOTE:

Add Phone command is not available
when the vehicle is moving.

Use the Connect Phone commands to manage
the phones connecting to the vehicle or to
enable the Bluetooth

function on the vehicle.

“Add Phone”

Use the Add Phone command to add a phone to
the vehicle. See “Connecting procedure” (P.4-
54) for more information.

“Select Phone”

Use the Select Phone command to select from a
list of phones connected to the vehicle. The
system will list the names assigned to each
phone and then prompt you for the phone you
wish to select. Only one phone can be active at
a time.

“Delete Phone”

Use the Delete Phone command to delete a
phone that is connected to the vehicle. The
system will list the names assigned to each
phone and then prompt you for the phone you
wish to delete. Deleting a phone from the vehicle
will also delete that phonebook for that phone.

“Bluetooth Off”

Use the Bluetooth Off command to prevent a
wireless connection to your phone.

“Replace phone”

This can be used to reconnect a new phone with
the vehicle you have changed your cellular
phone.

SPEAKER ADAPTATION (SA) MODE

Speaker Adaptation allows up to two out-of
dialect users to train the system to improve
recognition accuracy. By repeating a number of
commands, the users can create a voice model
of their own voice that is stored in the system.
The system is capable of storing a different
speaker adaptation model for each connected
phone.

Center display, heater, air conditioner, audio and phone systems

4-59

“Previous Name”

Use the Previous Name command to move the
previous name of list.

Recent Calls

Use the Recent Calls command to access
outgoing, incoming or missed calls.

“Outgoing”

Use the Outgoing command to list the outgoing
calls made from the vehicle.

“Incoming”

Use the Incoming command to list the incoming
calls made from the vehicle.

“Missed”

Use the Missed command to list the missed
calls made to the vehicle that were not
answered.

“Call Back”

Use the Call Back command to dial the number
of the most recently received call.

Connect Phone

NOTE:

Add Phone command is not available
when the vehicle is moving.

Use the Connect Phone commands to manage
the phones connecting to the vehicle or to
enable the Bluetooth

function on the vehicle.

“Add Phone”

Use the Add Phone command to add a phone to
the vehicle. See “Connecting procedure” (P.4-
54) for more information.

“Select Phone”

“Delete Phone”

“Bluetooth Off”

Use the Bluetooth Off command to prevent a
wireless connection to your phone.

“Replace phone”

This can be used to reconnect a new phone with
the vehicle you have changed your cellular
phone.

SPEAKER ADAPTATION (SA) MODE

Center display, heater, air conditioner, audio and phone systems

4-59

4-60

Center display, heater, air conditioner, audio and phone systems

Training procedure

1. Position the vehicle in a reasonably quiet

outdoor location.

2. Sit in the driver’s seat with the engine

running, the parking brake on, and the
transmission in Park.

3. Press and hold the

button for more than

5 seconds.

4. The system announces: “Press the PHONE

SEND (

) button for the hands-free

phone system to enter the speaker adapta-
tion mode or press the PHONE END (

)

button to select a different language.”

5. Press the

button.

For information on selecting a different
language, see “Choosing a language” (P.4-
54).

6. If the connected phone is already in use, the

system will prompt you to overwrite. Follow
the instructions provided by the system.

7. When preparation is complete and you are

ready to begin, press the

button.

8. The SA mode will be explained. Follow the

instructions provided by the system.

9. When training is finished, the system will tell

you an adequate number of phrases have
been recorded.

10. The system will announce that speaker

adaptation has been completed and the
system is ready.

The SA mode will stop if:
. The

button is pressed for more than 5

seconds in SA mode.

. The vehicle is driven during SA mode.
. The ignition switch is turned to the OFF or

LOCK position.

Training phrases

During the SA mode, the system instructs you to
say the following phrases.

(The system will prompt you for each phrase.)
. phonebook transfer entry
. dial 3 0 4 2 9
. delete call back number
. incoming
. transfer entry
. 8 pause 9 3 2 pause 7
. delete all entries
. call 7 2 4 0 9
. phonebook delete entry
. next entry
. dial star 2 1 7 0
. yes

. no
. select
. missed
. dial 8 5 6 9 2
. Bluetooth on
. Outgoing
. call 3 1 9 0 2
. 9 7 pause pause 3 0 8
. cancel
. call back number
. call star 2 0 9 5
. delete phone
. dial 8 3 0 5 1
. Record name
. 4 3 pause 2 9 pause 0
. delete redial number
. phonebook list names
. call 8 0 5 4 1
. correction
. setup main menu
. dial 7 4 0 1 8
. memo pad delete
. delete
. dial 9 7 2 6 6
. call 7 6 3 0 1

4-60

Center display, heater, air conditioner, audio and phone systems

Training procedure

1. Position the vehicle in a reasonably quiet

outdoor location.

2. Sit in the driver’s seat with the engine

running, the parking brake on, and the
transmission in Park.

3. Press and hold the

button for more than

5 seconds.

4. The system announces: “Press the PHONE

SEND (

) button for the hands-free

phone system to enter the speaker adapta-
tion mode or press the PHONE END (

)

button to select a different language.”

5. Press the

button.

For information on selecting a different
language, see “Choosing a language” (P.4-
54).

6. If the connected phone is already in use, the

system will prompt you to overwrite. Follow
the instructions provided by the system.

7. When preparation is complete and you are

ready to begin, press the

button.

8. The SA mode will be explained. Follow the

instructions provided by the system.

9. When training is finished, the system will tell

you an adequate number of phrases have
been recorded.

10. The system will announce that speaker

adaptation has been completed and the
system is ready.

The SA mode will stop if:
. The

button is pressed for more than 5

seconds in SA mode.

. The vehicle is driven during SA mode.
. The ignition switch is turned to the OFF or

LOCK position.

Training phrases

During the SA mode, the system instructs you to
say the following phrases.

. go back
. call 5 6 2 8 0
. dial 6 6 4 3 7

Center display, heater, air conditioner, audio and phone systems

4-61

. go back
. call 5 6 2 8 0
. dial 6 6 4 3 7

Center display, heater, air conditioner, audio and phone systems

4-61

4-62

Center display, heater, air conditioner, audio and phone systems

TROUBLESHOOTING GUIDE

The system should respond correctly to all voice commands without difficulty. If problems are encountered, try the following solutions.

Where the solutions are listed by number, try each solution in turn, starting with number 1, until the problem is resolved.

Symptom

Solution

The system fails to interpret the command
correctly.

1. Ensure that the command format is valid. (See “List of voice commands” (P.4-56).)

2. Ensure that the command is spoken after the tone.

3. Speak clearly without pausing between words and at a level appropriate to the ambient noise level in the vehicle.

4. Ensure that the ambient noise level is not excessive (for example, windows open or defroster on).
NOTE: If it is too noisy to use the phone, it is likely that the voice commands will not be recognized.

5. If more than one command was said at a time, try saying the commands separately.

6. If the system consistently fails to recognize commands, the voice training procedure should be carried out to improve the
recognition response for the speaker. (See “Speaker Adaptation (SA) mode” (P.4-59).)

The system consistently selects the
wrong entry from the phone book.

1. Ensure that the phone book entry name requested matches what was originally stored. This can be confirmed by using the
“List Names” command. (See “List of voice commands” (P.4-56).)

2. Replace one of the names being confused with a new name.

4-62

Center display, heater, air conditioner, audio and phone systems

TROUBLESHOOTING GUIDE

The system should respond correctly to all voice commands without difficulty. If problems are encountered, try the following solutions.

Where the solutions are listed by number, try each solution in turn, starting with number 1, until the problem is resolved.

Symptom

Solution

The system fails to interpret the command
correctly.

1. Ensure that the command format is valid. (See “List of voice commands” (P.4-56).)

2. Ensure that the command is spoken after the tone.

3. Speak clearly without pausing between words and at a level appropriate to the ambient noise level in the vehicle.

5. If more than one command was said at a time, try saying the commands separately.

The system consistently selects the
wrong entry from the phone book.

1. Ensure that the phone book entry name requested matches what was originally stored. This can be confirmed by using the
“List Names” command. (See “List of voice commands” (P.4-56).)

2. Replace one of the names being confused with a new name.

MEMO

Center display, heater, air conditioner, audio and phone systems

4-63

MEMO

Center display, heater, air conditioner, audio and phone systems

4-63

4-64

Center display, heater, air conditioner, audio and phone systems

MEMO

4-64

Center display, heater, air conditioner, audio and phone systems

MEMO

5 Starting and driving

Precautions when starting and driving . . . . . . . . 5-2

Exhaust gas (carbon monoxide) . . . . . . . . . .. 5-2
Three-way catalyst . . . . . . . . . . . . . . . .. 5-3
Tire Pressure Monitoring System (TPMS) . . . . . 5-3
Avoiding collision and rollover . . . . . . . . . . . 5-5
Off-road recovery . . . . . . . . . . . . . . . . 5-6
Rapid air pressure loss . . . . . . . . . . . . . .. 5-6
Drinking alcohol/drugs and driving . . . . . . . . . 5-7

Ignition switch (models without Intelligent
Key system) . . . . . . . . . . . . . . . . . . . . 5-7

Continuously Variable Transmission (CVT) . . . . ... 5-8
Manual Transmission (MT) . . . . . . . . . . . . 5-8
Key positions . . . . . . . . . . . . . . . . . . 5-9

Push-button ignition switch (models with Intelligent
Key system) . . . . . . . . . . . . . . . . . . . . 5-9

Operating range for engine start function . . . . . 5-9
Push-button ignition switch operation . . . . . . 5-10
Push-button ignition switch positions . . . . . . . 5-10
Emergency engine shut off . . . . . . . . . . . 5-11
Intelligent Key battery discharge . . . . . . . . .. 5-11

Before starting the engine . . . . . . . . . . . . ... 5-12
Starting the engine . . . . . . . . . . . . . . . . 5-12

Models without Intelligent Key system . . . . . ... 5-12
Models with Intelligent Key system . . . . . . . . 5-13

Driving the vehicle . . . . . . . . . . . . . . . . . 5-14

Continuously Variable Transmission (CVT) . . . . 5-14
Manual Transmission (MT) . . . . . . . . . . ... 5-18

Parking brake . . . . . . . . . . . . . . . . . . .. 5-20
Cruise control . . . . . . . . . . . . . . . . . . . 5-21

Precautions on cruise control . . . . . . . . . . 5-21
Cruise control operations . . . . . . . . . . . 5-22

Break-in schedule . . . . . . . . . . . . . . . . . 5-23
Fuel Efficient Driving Tips . . . . . . . . . . . . ... 5-23
Increasing fuel economy . . . . . . . . . . . . . .. 5-24
Parking/parking on hills . . . . . . . . . . . . . . 5-25
Electric power steering system . . . . . . . . . . . 5-26
Brake system . . . . . . . . . . . . . . . . . . .. 5-27

Braking precautions . . . . . . . . . . . . . .. 5-27
Anti-lock Braking System (ABS) . . . . . . . ... 5-27

Vehicle Dynamic Control (VDC) system . . . . . . . 5-29
Cold weather driving . . . . . . . . . . . . . . . 5-30

Freeing a frozen door lock . . . . . . . . . . ... 5-30
Anti-freeze . . . . . . . . . . . . . . . . . . 5-30
Battery . . . . . . . . . . . . . . . . . . . ... 5-30
Draining of coolant water . . . . . . . . . . . . 5-30
Tire equipment . . . . . . . . . . . . . . . . 5-31
Special winter equipment . . . . . . . . . . . 5-31
Driving on snow or ice . . . . . . . . . . . . . 5-31

5 Starting and driving

Precautions when starting and driving . . . . . . . . 5-2

Ignition switch (models without Intelligent
Key system) . . . . . . . . . . . . . . . . . . . . 5-7

Continuously Variable Transmission (CVT) . . . . ... 5-8
Manual Transmission (MT) . . . . . . . . . . . . 5-8
Key positions . . . . . . . . . . . . . . . . . . 5-9

Push-button ignition switch (models with Intelligent
Key system) . . . . . . . . . . . . . . . . . . . . 5-9

Before starting the engine . . . . . . . . . . . . ... 5-12
Starting the engine . . . . . . . . . . . . . . . . 5-12

Models without Intelligent Key system . . . . . ... 5-12
Models with Intelligent Key system . . . . . . . . 5-13

Driving the vehicle . . . . . . . . . . . . . . . . . 5-14

Continuously Variable Transmission (CVT) . . . . 5-14
Manual Transmission (MT) . . . . . . . . . . ... 5-18

Parking brake . . . . . . . . . . . . . . . . . . .. 5-20
Cruise control . . . . . . . . . . . . . . . . . . . 5-21

Precautions on cruise control . . . . . . . . . . 5-21
Cruise control operations . . . . . . . . . . . 5-22

Braking precautions . . . . . . . . . . . . . .. 5-27
Anti-lock Braking System (ABS) . . . . . . . ... 5-27

Vehicle Dynamic Control (VDC) system . . . . . . . 5-29
Cold weather driving . . . . . . . . . . . . . . . 5-30

5-2

Starting and driving

WARNING

. Do not leave children or adults who

would normally require the support
of others alone in your vehicle. Pets
should not be left alone either. They
could accidentally injure themselves
or others through inadvertent op-
eration of the vehicle. Also, on hot,
sunny days, temperatures in a
closed vehicle could quickly become
high enough to cause severe or
possibly fatal injuries to people or
animals.

. Properly secure all cargo with ropes

or straps to help prevent it from
sliding or shifting. Do not place
cargo higher than the seatbacks. In
a sudden stop or collision, unse-
cured cargo could cause personal
injury.

EXHAUST GAS (carbon monoxide)

WARNING

. Do not breathe exhaust gases; they

contain colorless and odorless car-
bon monoxide. Carbon monoxide is
dangerous. It can cause uncon-
sciousness or death.

. If you suspect that exhaust fumes

are entering the vehicle, drive with
all windows fully open, and have the
vehicle inspected immediately.

. Do not run the engine in closed

spaces such as a garage.

. Do not park the vehicle with the

engine running for any extended
length of time.

. Keep the back door closed while

driving, otherwise exhaust gases
could be drawn into the passenger
compartment. If you must drive with
the back door open, follow these
precautions:

1) Open all the windows.

2) Set the

air recirculation to

off and the fan control to high to
circulate the air.

. If electrical wiring or other cable

connections must pass to a trailer
through the seal on the back door or
the body, follow the manufacturer’s
recommendation to prevent carbon
monoxide entry into the vehicle.

. If a special body, camper or other

equipment is added for recreational
or other usage, follow the manufac-
turer’s recommendation to prevent
carbon monoxide entry into the
vehicle. (Some recreational vehicle
appliances such as stoves, refrig-
erators, heaters, etc. may also gen-
erate carbon monoxide.)

. The exhaust system and body

should be inspected by a qualified
mechanic whenever:

— The vehicle is raised for service.

— You suspect that exhaust fumes

are entering into the passenger
compartment.

— You notice a change in the

sound of the exhaust system.

— You have had an accident invol-

ving damage to the exhaust
system, underbody, or rear of
the vehicle.

PRECAUTIONS WHEN STARTING
AND DRIVING

5-2

Starting and driving

WARNING

. Do not leave children or adults who

. Properly secure all cargo with ropes

or straps to help prevent it from
sliding or shifting. Do not place
cargo higher than the seatbacks. In
a sudden stop or collision, unse-
cured cargo could cause personal
injury.

EXHAUST GAS (carbon monoxide)

WARNING

. Do not breathe exhaust gases; they

contain colorless and odorless car-
bon monoxide. Carbon monoxide is
dangerous. It can cause uncon-
sciousness or death.

. If you suspect that exhaust fumes

are entering the vehicle, drive with
all windows fully open, and have the
vehicle inspected immediately.

. Do not run the engine in closed

spaces such as a garage.

. Do not park the vehicle with the

engine running for any extended
length of time.

. Keep the back door closed while

driving, otherwise exhaust gases
could be drawn into the passenger
compartment. If you must drive with
the back door open, follow these
precautions:

1) Open all the windows.

2) Set the

air recirculation to

off and the fan control to high to
circulate the air.

. If electrical wiring or other cable

connections must pass to a trailer
through the seal on the back door or
the body, follow the manufacturer’s
recommendation to prevent carbon
monoxide entry into the vehicle.

. If a special body, camper or other

. The exhaust system and body

should be inspected by a qualified
mechanic whenever:

— The vehicle is raised for service.

— You suspect that exhaust fumes

are entering into the passenger
compartment.

— You notice a change in the

sound of the exhaust system.

— You have had an accident invol-

ving damage to the exhaust
system, underbody, or rear of
the vehicle.

PRECAUTIONS WHEN STARTING
AND DRIVING

THREE-WAY CATALYST

The three-way catalyst is an emission control
device installed in the exhaust system. Exhaust
gases in the three-way catalyst are burned at
high temperatures to help reduce pollutants.

WARNING

. The exhaust gas and the exhaust

system are very hot. Keep people,
animals or flammable materials
away from the exhaust system com-
ponents.

. Do not stop or park the vehicle over

flammable materials such as dry
grass, waste paper or rags. They
may ignite and cause a fire.

CAUTION

. Do not use leaded gasoline. Depos-

its from leaded gasoline will ser-
i o u s l y r e d u c e

t h e t h r e e - w a y

catalyst’s ability to help reduce ex-
haust pollutants.

. Keep your engine tuned up. Mal-

functions in the ignition, fuel injec-

tion, or electrical systems can cause
overrich fuel flow into the three-way
catalyst, causing it to overheat. Do
not keep driving if the engine mis-
fires, or if noticeable loss of perfor-
mance or other unusual operating
conditions are detected. Have the
vehicle inspected promptly by a
NISSAN dealer.

. Avoid driving with an extremely low

fuel level. Running out of fuel could
cause the engine to misfire, dama-
ging the three-way catalyst.

. Do not race the engine while warm-

ing it up.

. Do not push or tow your vehicle to

start the engine.

TIRE PRESSURE MONITORING SYS-
TEM (TPMS)

Each tire, including the spare (if provided),
should be checked monthly when cold and
inflated to the inflation pressure recommended
by the vehicle manufacturer on the vehicle
placard or tire inflation pressure label. (If your
vehicle has tires of a different size than the size
indicated on the vehicle placard or tire inflation
pressure label, you should determine the proper
tire inflation pressure for those tires.)

As an added safety feature, your vehicle has
been equipped with a Tire Pressure Monitoring
System (TPMS) that illuminates a low tire
pressure telltale when one or more of your tires
is significantly under-inflated. Accordingly, when
the low tire pressure telltale illuminates, you
should stop and check your tires as soon as
possible, and inflate them to the proper pres-
sure. Driving on a significantly under-inflated tire
causes the tire to overheat and can lead to tire
failure. Under-inflation also reduces fuel effi-
ciency and tire tread life, and may affect the
vehicle’s handling and stopping ability.

Please note that the TPMS is not a substitute for
proper tire maintenance, and it is the driver’s
responsibility to maintain correct tire pressure,
even if under-inflation has not reached the level
to trigger illumination of the TPMS low tire

Starting and driving

5-3

THREE-WAY CATALYST

The three-way catalyst is an emission control
device installed in the exhaust system. Exhaust
gases in the three-way catalyst are burned at
high temperatures to help reduce pollutants.

WARNING

. The exhaust gas and the exhaust

system are very hot. Keep people,
animals or flammable materials
away from the exhaust system com-
ponents.

. Do not stop or park the vehicle over

flammable materials such as dry
grass, waste paper or rags. They
may ignite and cause a fire.

CAUTION

. Do not use leaded gasoline. Depos-

its from leaded gasoline will ser-
i o u s l y r e d u c e

t h e t h r e e - w a y

catalyst’s ability to help reduce ex-
haust pollutants.

. Keep your engine tuned up. Mal-

functions in the ignition, fuel injec-

. Avoid driving with an extremely low

fuel level. Running out of fuel could
cause the engine to misfire, dama-
ging the three-way catalyst.

. Do not race the engine while warm-

ing it up.

. Do not push or tow your vehicle to

start the engine.

TIRE PRESSURE MONITORING SYS-
TEM (TPMS)

Starting and driving

5-3

5-4

Starting and driving

pressure telltale.

Your vehicle has also been equipped with a
TPMS malfunction indicator to indicate when the
system is not operating properly. The TPMS
malfunction indicator is combined with the low
tire pressure telltale. When the system detects a
malfunction, the telltale will flash for approxi-
mately one minute and then remain continuously
illuminated. This sequence will continue upon
subsequent vehicle start-ups as long as the
malfunction exists. When the malfunction indi-
cator is illuminated, the system may not be able
to detect or signal low tire pressure as intended.
TPMS malfunctions may occur for a variety of
reasons, including the installation of replace-
ment or alternate tires or wheels on the vehicle
that prevent the TPMS from functioning properly.
Always check the TPMS malfunction telltale
after replacing one or more tires or wheels on
your vehicle to ensure that the replacement or
alternate tires and wheels allow the TPMS to
continue to function properly.

Additional information

. The TPMS does not monitor the tire

pressure of the spare tire.

. The TPMS will activate only when the

vehicle is driven at speeds above 16 MPH
(25 km/h). Also, this system may not detect
a sudden drop in tire pressure (for example a

flat tire while driving).

. The low tire pressure warning light does not

automatically turn off when the tire pressure
is adjusted. After the tire is inflated to the
recommended pressure, the vehicle must be
driven at speeds above 16 MPH (25 km/h)
to activate the TPMS and turn off the low tire
pressure warning light. Use a tire pressure
gauge to check the tire pressure.

. The CHECK TIRE PRES (pressure) warning

message is displayed in the vehicle informa-
tion display when the low tire pressure
warning light is illuminated and low tire
pressure is detected. The CHECK TIRE
PRES warning message turns off when the
low tire pressure warning light turns off. The
low tire pressure warning light remains
illuminated until the tires are inflated to the
recommended COLD tire pressure. The
CHECK TIRE PRES warning message is
displayed each time the ignition switch is
placed in the ON position as long as the low
tire pressure warning light remains illumi-
nated. (See “Check tire pressure warning
message” (P.2-6).)

. The CHECK TIRE PRES warning message

is not displayed if the low tire pressure
warning light illuminates to indicate a TPMS
malfunction.

. Tire pressure rises and falls depending on

the heat caused by the vehicle’s operation
and the outside temperature. Low outside
temperature can lower the temperature of
the air inside the tire which can cause a
lower tire inflation pressure. This may cause
the low tire pressure warning light to
illuminate. If the warning light illuminates in
low ambient temperature, check the tire
pressure for all four tires.

For additional information, see “Low tire pres-
sure warning light” (P.2-14) and “Tire Pressure
Monitoring System (TPMS)” (P.6-3).

WARNING

. If the low tire pressure warning light

illuminates while driving, avoid sud-
den steering maneuvers or abrupt
braking, reduce vehicle speed, pull
off the road to a safe location and
stop the vehicle as soon as possi-
ble. Driving with under-inflated tires
may permanently damage the tires
and increase the likelihood of tire
failure. Serious vehicle damage
could occur and may lead to an
accident and could result in serious
personal injury. Check the tire pres-

5-4

Starting and driving

pressure telltale.

Additional information

. The TPMS does not monitor the tire

pressure of the spare tire.

. The TPMS will activate only when the

vehicle is driven at speeds above 16 MPH
(25 km/h). Also, this system may not detect
a sudden drop in tire pressure (for example a

flat tire while driving).

. The low tire pressure warning light does not

. The CHECK TIRE PRES (pressure) warning

. The CHECK TIRE PRES warning message

is not displayed if the low tire pressure
warning light illuminates to indicate a TPMS
malfunction.

. Tire pressure rises and falls depending on

For additional information, see “Low tire pres-
sure warning light” (P.2-14) and “Tire Pressure
Monitoring System (TPMS)” (P.6-3).

WARNING

. If the low tire pressure warning light

sure for all four tires. Adjust the tire
pressure to the recommended COLD
tire pressure shown on the Tire and
Loading Information label to turn
the low tire pressure warning light
OFF. If you have a flat tire, replace it
with a spare tire as soon as possi-
ble. (See “Flat tire” (P.6-3) for chan-
ging a flat tire.)

. When a spare tire is mounted or a

wheel is replaced, the TPMS will not
function and the low tire pressure
warning light will flash for approxi-
mately 1 minute. The light will
remain on after 1 minute. Contact
your NISSAN dealer as soon as
possible for tire replacement and/
or system resetting.

. Replacing tires with those not ori-

ginally specified by NISSAN could
affect the proper operation of the
TPMS.

. Do not inject any tire liquid or

aerosol tire sealant into the tires,
as this may cause a malfunction of
the tire pressure sensors.

CAUTION

. The TPMS may not function properly

when the wheels are equipped with
tire chains or the wheels are buried
in snow.

. Do not place metalized film or any

metal parts (antenna, etc.) on the
windows. This may cause poor re-
ception of the signals from the tire
pressure sensors, and the TPMS will
not function properly.

Some devices and transmitters may temporarily
interfere with the operation of the TPMS and
cause the low tire pressure warning light to
illuminate. Some examples are:
. Facilities or electric devices using similar

radio frequencies are near the vehicle.

. If a transmitter set to similar frequencies is

being used in or near the vehicle.

. If a computer (or similar equipment) or a DC/

AC converter is being used in or near the
vehicle.

FCC Notice:

This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:

(1) This device may not cause harmful
interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.

Note: Changes or modifications not ex-
pressly approved by the party responsible
for compliance could void the user’s
authority to operate the equipment.

AVOIDING COLLISION AND ROLL-
OVER

WARNING

Failure to operate this vehicle in a safe
and prudent manner may result in loss
of control or an accident.

Be alert and drive defensively at all times. Obey
all traffic regulations. Avoid excessive speed,
high speed cornering, or sudden steering
maneuvers, because these driving practices
could cause you to lose control of your vehicle.
As with any vehicle, a loss of control could

Starting and driving

5-5

. When a spare tire is mounted or a

. Replacing tires with those not ori-

ginally specified by NISSAN could
affect the proper operation of the
TPMS.

. Do not inject any tire liquid or

aerosol tire sealant into the tires,
as this may cause a malfunction of
the tire pressure sensors.

CAUTION

. The TPMS may not function properly

when the wheels are equipped with
tire chains or the wheels are buried
in snow.

. Do not place metalized film or any

metal parts (antenna, etc.) on the
windows. This may cause poor re-
ception of the signals from the tire
pressure sensors, and the TPMS will
not function properly.

radio frequencies are near the vehicle.

. If a transmitter set to similar frequencies is

being used in or near the vehicle.

. If a computer (or similar equipment) or a DC/

AC converter is being used in or near the
vehicle.

FCC Notice:

This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:

(1) This device may not cause harmful
interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.

Note: Changes or modifications not ex-
pressly approved by the party responsible
for compliance could void the user’s
authority to operate the equipment.

AVOIDING COLLISION AND ROLL-
OVER

WARNING

Failure to operate this vehicle in a safe
and prudent manner may result in loss
of control or an accident.

Starting and driving

5-5

5-6

Starting and driving

result in a collision with other vehicles or
objects, or cause the vehicle to rollover,
particularly if the loss of control causes the
vehicle to slide sideways. Be attentive at all
times, and avoid driving when tired. Never drive
when under the influence of alcohol or drugs
(including prescription or over-the-counter
drugs which may cause drowsiness). Always
wear your seat belt as outlined in the “Seat
belts” (P.1-11) of this manual, and also instruct
your passengers to do so.

Seat belts help reduce the risk of injury in
collisions and rollovers. In a rollover crash, an
unbelted or improperly belted person is
significantly more likely to be injured or
killed than a person properly wearing a
seat belt.

OFF-ROAD RECOVERY

If the right side or left side wheels leave the road
surface, maintain control of the vehicle by
following the procedure below. Please note that
this procedure is only a general guide. The
vehicle must be driven as appropriate based on
the conditions of the vehicle, road and traffic.

1. Remain calm and do not overreact.

2. Do not apply the brakes.

3. Maintain a firm grip on the steering wheel

with both hands and try to hold a straight
course.

4. When appropriate, slowly release the accel-

erator pedal to gradually slow the vehicle.

5. If there is nothing in the way, steer the

vehicle to follow the road while the vehicle
speed is reduced. Do not attempt to drive
the vehicle back onto the road surface until
vehicle speed is reduced.

6. When it is safe to do so, gradually turn the

steering wheel until both tires return to the
road surface. When all tires are on the road
surface, steer the vehicle to stay in the
appropriate driving lane.

If you decide that it is not safe to return

the vehicle to the road surface based on
vehicle, road or traffic conditions, gradu-
ally slow the vehicle to a stop in a safe
place off the road.

RAPID AIR PRESSURE LOSS

Rapid air pressure loss or a “blow-out” can
occur if the tire is punctured or is damaged due
to hitting a curb or pothole. Rapid air pressure
loss can also be caused by driving on under-
inflated tires.

Rapid air pressure loss can affect the handling
and stability of the vehicle, especially at highway
speeds.

Help prevent rapid air pressure loss by main-
taining the correct air pressure and visually

inspect the tires for wear and damage. See
“Wheels and tires” (P.8-30) of this manual.

If a tire rapidly loses air pressure or “blows-out”
while driving maintain control of the vehicle by
following the procedure below. Please note that
this procedure is only a general guide. The
vehicle must be driven as appropriate based on
the conditions of the vehicle, road and traffic.

WARNING

The following actions can increase the
chance of losing control of the vehicle if
there is a sudden loss of tire air
pressure. Losing control of the vehicle
may cause a collision and result in
personal injury.

. The vehicle generally moves or pulls

in the direction of the flat tire.

. Do not rapidly apply the brakes.
. Do not rapidly release the accelera-

tor pedal.

. Do not rapidly turn the steering

wheel.

1. Remain calm and do not overreact.

5-6

Starting and driving

OFF-ROAD RECOVERY

1. Remain calm and do not overreact.

2. Do not apply the brakes.

3. Maintain a firm grip on the steering wheel

with both hands and try to hold a straight
course.

4. When appropriate, slowly release the accel-

erator pedal to gradually slow the vehicle.

5. If there is nothing in the way, steer the

vehicle to follow the road while the vehicle
speed is reduced. Do not attempt to drive
the vehicle back onto the road surface until
vehicle speed is reduced.

6. When it is safe to do so, gradually turn the

steering wheel until both tires return to the
road surface. When all tires are on the road
surface, steer the vehicle to stay in the
appropriate driving lane.

If you decide that it is not safe to return

the vehicle to the road surface based on
vehicle, road or traffic conditions, gradu-
ally slow the vehicle to a stop in a safe
place off the road.

RAPID AIR PRESSURE LOSS

Rapid air pressure loss can affect the handling
and stability of the vehicle, especially at highway
speeds.

Help prevent rapid air pressure loss by main-
taining the correct air pressure and visually

inspect the tires for wear and damage. See
“Wheels and tires” (P.8-30) of this manual.

WARNING

. The vehicle generally moves or pulls

in the direction of the flat tire.

. Do not rapidly apply the brakes.
. Do not rapidly release the accelera-

tor pedal.

. Do not rapidly turn the steering

wheel.

1. Remain calm and do not overreact.

2. Maintain a firm grip on the steering wheel

with both hands and try to hold a straight
course.

3. When appropriate, slowly release the accel-

erator pedal to gradually slow the vehicle.

4. Gradually steer the vehicle to a safe location

off the road and away from traffic if possible.

5. Lightly apply the brake pedal to gradually

stop the vehicle.

6. Turn on the hazard warning flashers and

either contact a roadside emergency service
to change the tire or see “Changing a flat
tire” (P.6-3) of this Owner’s Manual.

DRINKING ALCOHOL/DRUGS AND
DRIVING

WARNING

Never drive under the influence of
alcohol or drugs. Alcohol in the blood-
stream reduces coordination, delays
reaction time and impairs judgement.
Driving after drinking alcohol increases
the likelihood of being involved in an
accident injuring yourself and others.
Additionally, if you are injured in an
accident, alcohol can increase the se-
verity of the injury.

NISSAN is committed to safe driving. However,
you must choose not to drive under the influence
of alcohol. Every year thousands of people are
injured or killed in alcohol-related accidents.
Although the local laws vary on what is
considered to be legally intoxicated, the fact is
that alcohol affects all people differently and
most people underestimate the effects of
alcohol.

Remember, drinking and driving don’t mix! And
that is true for drugs, too (over-the-counter,
prescription, and illegal drugs). Don’t drive if
your ability to operate your vehicle is impaired by
alcohol, drugs, or some other physical condition.

WARNING

Never remove or turn the key to the
LOCK position while driving. This may
cause the driver to lose control of the
vehicle and could result in serious
vehicle damage or personal injury.

Starting and driving

5-7

IGNITION SWITCH (models without
Intelligent Key system)

2. Maintain a firm grip on the steering wheel

with both hands and try to hold a straight
course.

3. When appropriate, slowly release the accel-

erator pedal to gradually slow the vehicle.

4. Gradually steer the vehicle to a safe location

off the road and away from traffic if possible.

5. Lightly apply the brake pedal to gradually

stop the vehicle.

6. Turn on the hazard warning flashers and

either contact a roadside emergency service
to change the tire or see “Changing a flat
tire” (P.6-3) of this Owner’s Manual.

DRINKING ALCOHOL/DRUGS AND
DRIVING

WARNING

Never remove or turn the key to the
LOCK position while driving. This may
cause the driver to lose control of the
vehicle and could result in serious
vehicle damage or personal injury.

Starting and driving

5-7

IGNITION SWITCH (models without
Intelligent Key system)

Была ли эта страница вам полезна?

Да!Нет

8 посетителей считают эту страницу полезной.

Nissan Cube (2014 year). Instruction — part 13

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.