Qashqai J11. Parking brake system — part 4
ADJUSTMENT OF REAR BRAKE CALIPER INITIAL POSITION
PB-49
< BASIC INSPECTION >
C
D
E
G
H
I
J
K
L
M
A
B
PB
N
O
P
ADJUSTMENT OF REAR BRAKE CALIPER INITIAL POSITION
Description
INFOID:0000000010833863
CAUTION:
When performing the following operations, always use CONSULT, for performing “INITIALIZATION
POSITION ADJUSTMENT”, “BRAKE OPERATION” and “BRAKE RELEASE” of “WORK SUPPORT”.
×
: Required
—: not required
Work Procedure
INFOID:0000000010833864
CAUTION:
When performing the following operations, always use CONSULT. (It cannot be performed by any
means other than CONSULT.)
• Replacing electric parking brake control module
• Removing/installing rear brake pad (When pressing piston of rear brake caliper assembly)
• Replacing rear brake pad
• Replacing rear brake caliper assembly
1.
PERFORM INITIALIZATION POSITION ADJUSTMENT
With CONSULT
1.
Turn the ignition switch OFF to ON.
2.
Select “EHS/PKB”, “WORK SUPPORT”, and “INITIALIZATION POSITION ADJUSTMENT” according to
this order.
CAUTION:
• Never operate the parking brake switch.
• Never depress the brake pedal.
3.
Touch “START”.
>> GO TO 2.
2.
PERFORM BRAKE OPERATION
With CONSULT
1.
Select “EHS/PKB”, “WORK SUPPORT”, and “BRAKE OPERATION” according to this order.
CAUTION:
• Never operate the parking brake switch.
• Never depress the brake pedal.
2.
Touch “START”.
Procedure
• INITIALIZATION POSITION ADJUSTMENT
• BRAKE OPERATION
• BRAKE RELEASE
Removing/installing electric parking brake control module
—
Replacing electric parking brake control module
×
Removing/installing rear brake pad (When not pressing piston of rear
brake caliper assembly)
—
Removing/installing rear brake pad (When pressing piston of rear brake
caliper assembly)
×
Replacing rear brake pad
×
Removing/installing rear brake caliper assembly
—
Replacing rear brake caliper assembly
×
Removing/installing parking brake switch
—
Replacing parking brake switch
—
Removing/installing clutch stroke sensor
—
Replacing clutch stroke sensor
—
Removing/installing clutch pedal
—
Replacing clutch pedal
—
PB-50
< BASIC INSPECTION >
ADJUSTMENT OF REAR BRAKE CALIPER INITIAL POSITION
ADJUSTMENT OF REAR BRAKE CALIPER INITIAL POSITION
Description
INFOID:0000000010833863
CAUTION:
When performing the following operations, always use CONSULT, for performing “INITIALIZATION
POSITION ADJUSTMENT”, “BRAKE OPERATION” and “BRAKE RELEASE” of “WORK SUPPORT”.
×
: Required
—: not required
Work Procedure
INFOID:0000000010833864
CAUTION:
When performing the following operations, always use CONSULT. (It cannot be performed by any
means other than CONSULT.)
• Replacing electric parking brake control module
• Removing/installing rear brake pad (When pressing piston of rear brake caliper assembly)
• Replacing rear brake pad
• Replacing rear brake caliper assembly
1.
PERFORM INITIALIZATION POSITION ADJUSTMENT
With CONSULT
1.
Turn the ignition switch OFF to ON.
2.
Select “EHS/PKB”, “WORK SUPPORT”, and “INITIALIZATION POSITION ADJUSTMENT” according to
this order.
CAUTION:
• Never operate the parking brake switch.
• Never depress the brake pedal.
3.
Touch “START”.
>> GO TO 2.
2.
PERFORM BRAKE OPERATION
With CONSULT
1.
Select “EHS/PKB”, “WORK SUPPORT”, and “BRAKE OPERATION” according to this order.
CAUTION:
• Never operate the parking brake switch.
• Never depress the brake pedal.
2.
Touch “START”.
Procedure
• INITIALIZATION POSITION ADJUSTMENT
• BRAKE OPERATION
• BRAKE RELEASE
Removing/installing electric parking brake control module
—
Replacing electric parking brake control module
×
Removing/installing rear brake pad (When not pressing piston of rear
brake caliper assembly)
—
Removing/installing rear brake pad (When pressing piston of rear brake
caliper assembly)
×
Replacing rear brake pad
×
Removing/installing rear brake caliper assembly
—
Replacing rear brake caliper assembly
×
Removing/installing parking brake switch
—
Replacing parking brake switch
—
Removing/installing clutch stroke sensor
—
Replacing clutch stroke sensor
—
Removing/installing clutch pedal
—
Replacing clutch pedal
—
CALIBRATION OF G SENSOR
PB-51
< BASIC INSPECTION >
C
D
E
G
H
I
J
K
L
M
A
B
PB
N
O
P
CALIBRATION OF G SENSOR
Description
INFOID:0000000010833865
CAUTION:
When performing the following operations, always use CONSULT, for performing “G SENSOR CALI-
BRATION” of “WORK SUPPORT”.
NOTE:
G sensor is integrated in electric parking control module.
×
: Required
—: not required
Work Procedure
INFOID:0000000010833866
CAUTION:
When the following operations are performed, always use CONSULT. (It cannot be performed by any
means other than CONSULT.)
• Replacing electric parking brake control module (G sensor is integrated in electric parking brake
control module)
1.
CHECK THE VEHICLE STATUS
1.
Steer the steering wheel to the straight-ahead position.
2.
Stop the vehicle on level surface.
3.
Stop the engine.
4.
Turn the ignition switch OFF.
Is the vehicle stopped with steering wheel in the straight-ahead on level surface?
YES
>> GO TO 2.
NO
>> Steer the steering wheel to the straight-ahead position. Stop the vehicle on level surface.
2.
PERFORM G SENSOR CALIBRATION
CAUTION:
• Never allow passenger or load on the vehicle.
• Never apply vibration to the vehicle body when opening or closing door during calibration.
With CONSULT
1.
Turn the ignition switch ON.
CAUTION:
Never start the engine.
2.
Select “EHS/PKB”, “WORK SUPPORT”, and “G SENSOR CALIBRATION” according to this order.
3.
Touch “START”.
4.
After approx. 10 seconds, touch “END”.
5.
Turn the ignition switch OFF and then turn it ON again.
Procedure
G SENSOR CALIBRATION
Removing/installing electric parking brake control module
×
Replacing electric parking brake control module
×
Removing/installing rear brake pad (When not pressing piston of rear
brake caliper assembly)
—
Removing/installing rear brake pad (When pressing piston of rear brake
caliper assembly)
—
Replacing rear brake pad
—
Removing/installing rear brake caliper assembly
—
Replacing rear brake caliper assembly
—
Removing/installing parking brake switch
—
Replacing parking brake switch
—
Removing/installing clutch stroke sensor
—
Replacing clutch stroke sensor
—
Removing/installing clutch pedal
—
Replacing clutch pedal
—
PB-52
< BASIC INSPECTION >
CALIBRATION OF G SENSOR
CALIBRATION OF G SENSOR
Description
INFOID:0000000010833865
CAUTION:
When performing the following operations, always use CONSULT, for performing “G SENSOR CALI-
BRATION” of “WORK SUPPORT”.
NOTE:
G sensor is integrated in electric parking control module.
×
: Required
—: not required
Work Procedure
INFOID:0000000010833866
CAUTION:
When the following operations are performed, always use CONSULT. (It cannot be performed by any
means other than CONSULT.)
• Replacing electric parking brake control module (G sensor is integrated in electric parking brake
control module)
1.
CHECK THE VEHICLE STATUS
1.
Steer the steering wheel to the straight-ahead position.
2.
Stop the vehicle on level surface.
3.
Stop the engine.
4.
Turn the ignition switch OFF.
Is the vehicle stopped with steering wheel in the straight-ahead on level surface?
YES
>> GO TO 2.
NO
>> Steer the steering wheel to the straight-ahead position. Stop the vehicle on level surface.
2.
PERFORM G SENSOR CALIBRATION
CAUTION:
• Never allow passenger or load on the vehicle.
• Never apply vibration to the vehicle body when opening or closing door during calibration.
With CONSULT
1.
Turn the ignition switch ON.
CAUTION:
Never start the engine.
2.
Select “EHS/PKB”, “WORK SUPPORT”, and “G SENSOR CALIBRATION” according to this order.
3.
Touch “START”.
4.
After approx. 10 seconds, touch “END”.
5.
Turn the ignition switch OFF and then turn it ON again.
Procedure
G SENSOR CALIBRATION
Removing/installing electric parking brake control module
×
Replacing electric parking brake control module
×
Removing/installing rear brake pad (When not pressing piston of rear
brake caliper assembly)
—
Removing/installing rear brake pad (When pressing piston of rear brake
caliper assembly)
—
Replacing rear brake pad
—
Removing/installing rear brake caliper assembly
—
Replacing rear brake caliper assembly
—
Removing/installing parking brake switch
—
Replacing parking brake switch
—
Removing/installing clutch stroke sensor
—
Replacing clutch stroke sensor
—
Removing/installing clutch pedal
—
Replacing clutch pedal
—
RESET OF CLUTCH STROKE SENSOR
PB-53
< BASIC INSPECTION >
C
D
E
G
H
I
J
K
L
M
A
B
PB
N
O
P
RESET OF CLUTCH STROKE SENSOR
Description
INFOID:0000000010833867
CAUTION:
When the following operations are performed, always use CONSULT, and carry “CLUTCH SENSOR
RESET” of “WORK SUPPORT”.
×
: Required
—: not required
Work Procedure
INFOID:0000000010833868
CAUTION:
When the following operations are performed, always use CONSULT. (It cannot be performed by any
means other than CONSULT.)
• Replacing electric parking brake control module
• Removing/installing clutch stroke sensor
• Replacing clutch stroke sensor
• Removing/installing clutch pedal
• Replacing clutch pedal
1.
CHECK THE VEHICLE STATUS
1.
Stop the vehicle.
2.
Stop the engine.
3.
Turn the ignition switch OFF.
>> GO TO 2.
2.
CHECKING INSTALLATION CONDITION OF CLUTCH COMPONENTS
Check the installation conditions of clutch components.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace error-detected parts and GO TO 3.
3.
PERFORM CLUTCH SENSOR RESET
CAUTION:
• Never allow passenger or load on the vehicle.
• Never apply vibration to the vehicle body when opening or closing door during calibration.
With CONSULT
1.
Turn the ignition switch ON.
Procedure
CLUTCH SENSOR RESET
Removing/installing electric parking brake control module
—
Replacing electric parking brake control module
×
Removing/installing rear brake pad (When not pressing piston of rear
brake caliper assembly)
—
Removing/installing rear brake pad (When pressing piston of rear brake
caliper assembly)
—
Replacing rear brake pad
—
Removing/installing rear brake caliper assembly
—
Replacing rear brake caliper assembly
—
Removing/installing parking brake switch
—
Replacing parking brake switch
—
Removing/installing clutch stroke sensor
×
Replacing clutch stroke sensor
×
Removing/installing clutch pedal
×
Replacing clutch pedal
×
PB-54
< BASIC INSPECTION >
RESET OF CLUTCH STROKE SENSOR
RESET OF CLUTCH STROKE SENSOR
Description
INFOID:0000000010833867
CAUTION:
When the following operations are performed, always use CONSULT, and carry “CLUTCH SENSOR
RESET” of “WORK SUPPORT”.
×
: Required
—: not required
Work Procedure
INFOID:0000000010833868
CAUTION:
When the following operations are performed, always use CONSULT. (It cannot be performed by any
means other than CONSULT.)
• Replacing electric parking brake control module
• Removing/installing clutch stroke sensor
• Replacing clutch stroke sensor
• Removing/installing clutch pedal
• Replacing clutch pedal
1.
CHECK THE VEHICLE STATUS
1.
Stop the vehicle.
2.
Stop the engine.
3.
Turn the ignition switch OFF.
>> GO TO 2.
2.
CHECKING INSTALLATION CONDITION OF CLUTCH COMPONENTS
Check the installation conditions of clutch components.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace error-detected parts and GO TO 3.
3.
PERFORM CLUTCH SENSOR RESET
CAUTION:
• Never allow passenger or load on the vehicle.
• Never apply vibration to the vehicle body when opening or closing door during calibration.
With CONSULT
1.
Turn the ignition switch ON.
Procedure
CLUTCH SENSOR RESET
Removing/installing electric parking brake control module
—
Replacing electric parking brake control module
×
Removing/installing rear brake pad (When not pressing piston of rear
brake caliper assembly)
—
Removing/installing rear brake pad (When pressing piston of rear brake
caliper assembly)
—
Replacing rear brake pad
—
Removing/installing rear brake caliper assembly
—
Replacing rear brake caliper assembly
—
Removing/installing parking brake switch
—
Replacing parking brake switch
—
Removing/installing clutch stroke sensor
×
Replacing clutch stroke sensor
×
Removing/installing clutch pedal
×
Replacing clutch pedal
×
OPERATION OF REAR BRAKE CALIPER
PB-55
< BASIC INSPECTION >
C
D
E
G
H
I
J
K
L
M
A
B
PB
N
O
P
OPERATION OF REAR BRAKE CALIPER
Description
INFOID:0000000010833869
CAUTION:
When the following operations are performed, always use CONSULT, for performing “BRAKE OPERA-
TION” of “WORK SUPPORT”.
×
: Required
—: not required
Work Procedure
INFOID:0000000010833870
CAUTION:
When the following operations are performed, always use CONSULT. (It cannot be performed by any
means other than CONSULT.)
• Removing/installing electric parking brake control module
• Replacing electric parking brake control module
• Removing/installing rear brake pad (When not pressing piston of rear brake caliper assembly)
• Removing/installing rear brake pad (When pressing piston of rear brake caliper assembly)
• Replacing rear brake pad
• Removing/installing rear brake caliper assembly
• Replacing rear brake caliper assembly
NOTE:
When the replaced rear brake pad, refer to
1.
PERFORM BRAKE OPERATION
With CONSULT
1.
Select “EHS/PKB”, “WORK SUPPORT”, and “BRAKE OPERATION” according to this order.
CAUTION:
• Never operate the parking brake switch.
• Never depress the brake pedal.
2.
Touch “START”.
>> GO TO 2.
2.
PERFORM BRAKE RELEASE
With CONSULT
1.
Select “EHS/PKB”, “WORK SUPPORT”, and “BRAKE RELEASE” according to this order.
CAUTION:
• Never operate the parking brake switch.
• Never depress the brake pedal.
Procedure
BRAKE OPERATION
Removing/installing electric parking brake control module
×
Replacing electric parking brake control module
×
Removing/installing rear brake pad (When not pressing piston of rear
brake caliper assembly)
×
Removing/installing rear brake pad (When pressing piston of rear brake
caliper assembly)
×
Replacing rear brake pad
×
Removing/installing rear brake caliper assembly
×
Replacing rear brake caliper assembly
×
Removing/installing parking brake switch
—
Replacing parking brake switch
—
Removing/installing clutch stroke sensor
—
Replacing clutch stroke sensor
—
Removing/installing clutch pedal
—
Replacing clutch pedal
—
PB-56
< BASIC INSPECTION >
OPERATION OF REAR BRAKE CALIPER
OPERATION OF REAR BRAKE CALIPER
Description
INFOID:0000000010833869
CAUTION:
When the following operations are performed, always use CONSULT, for performing “BRAKE OPERA-
TION” of “WORK SUPPORT”.
×
: Required
—: not required
Work Procedure
INFOID:0000000010833870
CAUTION:
When the following operations are performed, always use CONSULT. (It cannot be performed by any
means other than CONSULT.)
• Removing/installing electric parking brake control module
• Replacing electric parking brake control module
• Removing/installing rear brake pad (When not pressing piston of rear brake caliper assembly)
• Removing/installing rear brake pad (When pressing piston of rear brake caliper assembly)
• Replacing rear brake pad
• Removing/installing rear brake caliper assembly
• Replacing rear brake caliper assembly
NOTE:
When the replaced rear brake pad, refer to
1.
PERFORM BRAKE OPERATION
With CONSULT
1.
Select “EHS/PKB”, “WORK SUPPORT”, and “BRAKE OPERATION” according to this order.
CAUTION:
• Never operate the parking brake switch.
• Never depress the brake pedal.
2.
Touch “START”.
>> GO TO 2.
2.
PERFORM BRAKE RELEASE
With CONSULT
1.
Select “EHS/PKB”, “WORK SUPPORT”, and “BRAKE RELEASE” according to this order.
CAUTION:
• Never operate the parking brake switch.
• Never depress the brake pedal.
Procedure
BRAKE OPERATION
Removing/installing electric parking brake control module
×
Replacing electric parking brake control module
×
Removing/installing rear brake pad (When not pressing piston of rear
brake caliper assembly)
×
Removing/installing rear brake pad (When pressing piston of rear brake
caliper assembly)
×
Replacing rear brake pad
×
Removing/installing rear brake caliper assembly
×
Replacing rear brake caliper assembly
×
Removing/installing parking brake switch
—
Replacing parking brake switch
—
Removing/installing clutch stroke sensor
—
Replacing clutch stroke sensor
—
Removing/installing clutch pedal
—
Replacing clutch pedal
—
RELEASE OF REAR BRAKE CALIPER
PB-57
< BASIC INSPECTION >
C
D
E
G
H
I
J
K
L
M
A
B
PB
N
O
P
RELEASE OF REAR BRAKE CALIPER
Description
INFOID:0000000010833871
CAUTION:
When the following operations are performed, always use CONSULT, for performing “BRAKE
RELEASE” of “WORK SUPPORT”.
×
: Required
—: not required
Work Procedure
INFOID:0000000010833872
CAUTION:
When the following operations are performed, always use CONSULT. (It cannot be performed by any
means other than CONSULT.)
• Removing/installing electric parking brake control module
• Replacing electric parking brake control module
• Removing/installing rear brake pad (When not pressing piston of rear brake caliper assembly)
• Removing/installing rear brake pad (When pressing piston of rear brake caliper assembly)
• Replacing rear brake pad
• Removing/installing rear brake caliper assembly
• Replacing rear brake caliper assembly
NOTE:
When the replaced rear brake pad, refer to
1.
PERFORM BRAKE OPERATION
With CONSULT
1.
Select “EHS/PKB”, “WORK SUPPORT”, and “BRAKE OPERATION” according to this order.
CAUTION:
• Never operate the parking brake switch.
• Never depress the brake pedal.
2.
Touch “START”.
>> GO TO 2.
2.
PERFORM BRAKE RELEASE
With CONSULT
1.
Select “EHS/PKB”, “WORK SUPPORT”, and “BRAKE RELEASE” according to this order.
CAUTION:
• Never operate the parking brake switch.
• Never depress the brake pedal.
Procedure
BRAKE RELEASE
Removing/installing electric parking brake control module
×
Replacing electric parking brake control module
×
Removing/installing rear brake pad (When not pressing piston of rear
brake caliper assembly)
×
Removing/installing rear brake pad (When pressing piston of rear brake
caliper assembly)
×
Replacing rear brake pad
×
Removing/installing rear brake caliper assembly
×
Replacing rear brake caliper assembly
×
Removing/installing parking brake switch
—
Replacing parking brake switch
—
Removing/installing clutch stroke sensor
—
Replacing clutch stroke sensor
—
Removing/installing clutch pedal
—
Replacing clutch pedal
—
PB-58
< BASIC INSPECTION >
RELEASE OF REAR BRAKE CALIPER
RELEASE OF REAR BRAKE CALIPER
Description
INFOID:0000000010833871
CAUTION:
When the following operations are performed, always use CONSULT, for performing “BRAKE
RELEASE” of “WORK SUPPORT”.
×
: Required
—: not required
Work Procedure
INFOID:0000000010833872
CAUTION:
When the following operations are performed, always use CONSULT. (It cannot be performed by any
means other than CONSULT.)
• Removing/installing electric parking brake control module
• Replacing electric parking brake control module
• Removing/installing rear brake pad (When not pressing piston of rear brake caliper assembly)
• Removing/installing rear brake pad (When pressing piston of rear brake caliper assembly)
• Replacing rear brake pad
• Removing/installing rear brake caliper assembly
• Replacing rear brake caliper assembly
NOTE:
When the replaced rear brake pad, refer to
1.
PERFORM BRAKE OPERATION
With CONSULT
1.
Select “EHS/PKB”, “WORK SUPPORT”, and “BRAKE OPERATION” according to this order.
CAUTION:
• Never operate the parking brake switch.
• Never depress the brake pedal.
2.
Touch “START”.
>> GO TO 2.
2.
PERFORM BRAKE RELEASE
With CONSULT
1.
Select “EHS/PKB”, “WORK SUPPORT”, and “BRAKE RELEASE” according to this order.
CAUTION:
• Never operate the parking brake switch.
• Never depress the brake pedal.
Procedure
BRAKE RELEASE
Removing/installing electric parking brake control module
×
Replacing electric parking brake control module
×
Removing/installing rear brake pad (When not pressing piston of rear
brake caliper assembly)
×
Removing/installing rear brake pad (When pressing piston of rear brake
caliper assembly)
×
Replacing rear brake pad
×
Removing/installing rear brake caliper assembly
×
Replacing rear brake caliper assembly
×
Removing/installing parking brake switch
—
Replacing parking brake switch
—
Removing/installing clutch stroke sensor
—
Replacing clutch stroke sensor
—
Removing/installing clutch pedal
—
Replacing clutch pedal
—
CHANGE OF SYSTEM MODE
PB-59
< BASIC INSPECTION >
C
D
E
G
H
I
J
K
L
M
A
B
PB
N
O
P
CHANGE OF SYSTEM MODE
Description
INFOID:0000000010833873
CAUTION:
When the following operations are performed, always use CONSULT, for performing “SYSTEM MODE
CHANGE” of “WORK SUPPORT”.
×
: Required
—: not required
Work Procedure
INFOID:0000000010833874
CAUTION:
When performing the following operations, always use CONSULT. (It cannot be performed by any
means other than CONSULT.)
• Replacing electric parking brake control module
1.
CONFIGURATION
Perform the configuration. Refer to
.
>> GO TO 2.
2.
CALIBRATION OF G SENSOR
Perform the calibration of G sensor. Refer to
.
>> GO TO 3.
3.
RESET OF CLUTCH PEDAL STROKE SENSOR
Perform the reset of clutch stroke sensor. Refer to
>> GO TO 4.
4.
ADJUSTMENT OF REAR BRAKE CALIPER INITIAL POSITION
Perform the adjustment of rear brake caliper initial position: Refer to
>> GO TO 5.
5.
OPERATION OF REAR BRAKE CALIPER
Perform the operation of rear brake caliper: Refer to
>> GO TO 6.
6.
RELEASE OF REAR BRAKE CALIPER
Perform the release of rear brake caliper: Refer to
Procedure
SYSTEM MODE CHANGE
Removing/installing electric parking brake control module
—
Replacing electric parking brake control module
×
Removing/installing rear brake pad (When not pressing piston of rear
brake caliper assembly)
—
Replacing rear brake caliper assembly
—
Removing/installing parking brake switch
—
Replacing parking brake switch
—
Removing/installing clutch stroke sensor
—
Replacing clutch stroke sensor
—
Removing/installing clutch pedal
—
Replacing clutch pedal
—
PB-60
< BASIC INSPECTION >
CHANGE OF SYSTEM MODE
CHANGE OF SYSTEM MODE
Description
INFOID:0000000010833873
CAUTION:
When the following operations are performed, always use CONSULT, for performing “SYSTEM MODE
CHANGE” of “WORK SUPPORT”.
×
: Required
—: not required
Work Procedure
INFOID:0000000010833874
CAUTION:
When performing the following operations, always use CONSULT. (It cannot be performed by any
means other than CONSULT.)
• Replacing electric parking brake control module
1.
CONFIGURATION
Perform the configuration. Refer to
.
>> GO TO 2.
2.
CALIBRATION OF G SENSOR
Perform the calibration of G sensor. Refer to
.
>> GO TO 3.
3.
RESET OF CLUTCH PEDAL STROKE SENSOR
Perform the reset of clutch stroke sensor. Refer to
>> GO TO 4.
4.
ADJUSTMENT OF REAR BRAKE CALIPER INITIAL POSITION
Perform the adjustment of rear brake caliper initial position: Refer to
>> GO TO 5.
5.
OPERATION OF REAR BRAKE CALIPER
Perform the operation of rear brake caliper: Refer to
>> GO TO 6.
6.
RELEASE OF REAR BRAKE CALIPER
Perform the release of rear brake caliper: Refer to
Procedure
SYSTEM MODE CHANGE
Removing/installing electric parking brake control module
—
Replacing electric parking brake control module
×
Removing/installing rear brake pad (When not pressing piston of rear
brake caliper assembly)
—
Replacing rear brake caliper assembly
—
Removing/installing parking brake switch
—
Replacing parking brake switch
—
Removing/installing clutch stroke sensor
—
Replacing clutch stroke sensor
—
Removing/installing clutch pedal
—
Replacing clutch pedal
—
C10C8 ELECTRIC PARKING BRAKE CONTROL MODULE
PB-61
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
G
H
I
J
K
L
M
A
B
PB
N
O
P
DTC/CIRCUIT DIAGNOSIS
C10C8 ELECTRIC PARKING BRAKE CONTROL MODULE
DTC Description
INFOID:0000000010833649
DTC DETECTION LOGIC
POSSIBLE CAUSE
• Harness or connector
• Electric parking brake control module
• Parking brake switch
FAIL-SAFE
Type 1
Only mechanical release is available.
Type 2
Only mechanical release is available.
Type 3
Only mechanical release is available.
Type 4
Only mechanical release is available.
Type 5
Automatic apply and release are prohibited.
DTC CONFIRMATION PROCEDURE
1.
PRECONDITIONING
If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn the ignition switch OFF
and wait at least 10 seconds before conducting the next test.
>> GO TO 2.
2.
CHECK DTC DETECTION
With CONSULT
1.
Turn the ignition switch OFF to ON.
CAUTION:
Be sure to wait for 10 seconds after turning ignition switch OFF or ON.
2.
Push the parking brake switch.
CAUTION:
DTC
Display Item
(Trouble diagnosis content)
Malfunction detected condition
Type
C10C8
CONTROL MODULE
(CONTROL MODULE)
INTERNAL ELECTRIC
MALFNCTN
(INTERNAL ELECTRIC
MALFNCTN)
When there is an internal malfunction in the electric park-
ing brake control module. (Malfunction of hardware)
1
WATCHDOG/SAFETY
µ
C
ERROR
(Watchdog/safety
µ
C error)
When there is an internal malfunction in the electric park-
ing brake control module. (Malfunction of communica-
tion)
2
SUPERVISION SOFT-
WARE ERROR
(Supervision software error)
When there is an internal malfunction in the electric park-
ing brake control module. (Malfunction of software)
3
EVENT INFORMATION
(Event information)
When there is an internal malfunction in the electric park-
ing brake control module. (Maintenance mode)
4
NOT CONFIGURED
(Not configured)
When variant coding is incomplete.
5
PB-62
< DTC/CIRCUIT DIAGNOSIS >
C10C8 ELECTRIC PARKING BRAKE CONTROL MODULE
• Set the select lever in the P position.
• Depress the brake pedal.
3.
Pull the parking brake switch.
4.
Perform self-diagnosis for “EHS/PKB”.
Is DTC “C10C8” detected?
YES (Type 1)>>Proceed to
PB-62, "TYPE 1 : Diagnosis Procedure"
.
YES (Type 2)>>Proceed to
PB-62, "TYPE 2 : Diagnosis Procedure"
.
YES (Type 3)>>Proceed to
PB-62, "TYPE 3 : Diagnosis Procedure"
.
YES (Type 4)>>Proceed to
PB-62, "TYPE 4 : Diagnosis Procedure"
.
YES (Type 5)>>Proceed to
PB-63, "TYPE 5 : Diagnosis Procedure"
.
NO-1
>> To check malfunction symptom before repair: Refer to
GI-44, "Intermittent Incident"
NO-2
>> Confirmation after repair: INSPECTION END
TYPE 1
TYPE 1 : Diagnosis Procedure
INFOID:0000000010833650
1.
REPLACE ELECTRIC PARKING BRAKE CONTROL MODULE
Replace the electric parking brake control module even if other display than “C10C8” (CONTROL MODULE
INTERNAL ELECTRIC) is displayed in self-diagnosis for “EHS/PKB”.
>> Replace the electric parking brake control module. Refer to
PB-141, "Removal and Installation"
TYPE 2
TYPE 2 : Diagnosis Procedure
INFOID:0000000010833651
1.
REPLACE ELECTRIC PARKING BRAKE CONTROL MODULE
Replace the electric parking brake control module even if other display than “C10C8” (CONTROL MODULE
WATCHDOG/SAFETY
µ
C ERROR) is displayed in self-diagnosis for “EHS/PKB”.
>> Replace the electric parking brake control module. Refer to
PB-141, "Removal and Installation"
TYPE 3
TYPE 3 : Diagnosis Procedure
INFOID:0000000010833652
1.
REPLACE ELECTRIC PARKING BRAKE CONTROL MODULE
Replace the electric parking brake control module even if other display than “C10C8” (CONTROL MODULE
SUPERVISION SOFTWARE ERROR) is displayed in self-diagnosis for “EHS/PKB”.
>> Replace the electric parking brake control module. Refer to
PB-141, "Removal and Installation"
TYPE 4
TYPE 4 : Diagnosis Procedure
INFOID:0000000010833653
1.
ERASE SELF-DIAGNOSIS RESULT
With CONSULT
1.
Turn the ignition switch ON.
2.
Erase self-diagnosis result for “EHS/PKB”.
>> GO TO 2.
2.
PERFORM WORK SUPPORT (1)
With CONSULT
Select “WORK SUPPORT” and “FINISH BRAKE PAD REPLACEMENT” according to this order.
C10C8 ELECTRIC PARKING BRAKE CONTROL MODULE
PB-63
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
G
H
I
J
K
L
M
A
B
PB
N
O
P
>> GO TO 3.
3.
PERFORM WORK SUPPORT (2)
With CONSULT
Touch “INITIALIZATION POSITION ADJUSTMENT”.
>> GO TO 4.
4.
PERFORM SELF-DIAGNOSIS
With CONSULT
Perform self-diagnosis for “EHS/PKB”.
Is DTC “C10C8 (CONTROL MODULE EVENT INFORMATION)” detected?
YES
>> Replace the electric parking brake control module. Refer to
PB-141, "Removal and Installation"
NO
>> INSPECTION END
TYPE 5
TYPE 5 : Diagnosis Procedure
INFOID:0000000010833654
1.
PERFORM CONFIGURATION
Perform configuration of electric parking brake control module. Refer to
.
>> GO TO 2.
2.
PERFORM SELF-DIAGNOSIS
With CONSULT
1.
Turn the ignition switch ON.
2.
Perform self-diagnosis for “EHS/PKB”.
Is DTC “C1C08 (NOT CONFIGURED)” detected?
YES
>> Replace the electric parking brake control module. Refer to
PB-141, "Removal and Installation"
NO
>> INSPECTION END
PB-64
< DTC/CIRCUIT DIAGNOSIS >
C10E3 PARKING BRAKE SWITCH
C10E3 PARKING BRAKE SWITCH
DTC Description
INFOID:0000000010833655
DTC DETECTION LOGIC
POSSIBLE CAUSE
• Harness or connector
• Parking brake switch
• Electric parking brake control module
FAIL-SAFE
• Applying the parking brake is prohibited.
• Release using the parking brake switch is prohibited. (It can be released automatically.)
• Automatic apply is available.
DTC CONFIRMATION PROCEDURE
1.
PRECONDITIONING
If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn the ignition switch OFF
and wait at least 10 seconds before conducting the next test.
>> GO TO 2.
2.
CHECK DTC DETECTION
With CONSULT
1.
Turn the ignition switch OFF to ON.
CAUTION:
Be sure to wait for 10 seconds after turning ignition switch OFF or ON.
2.
Push the parking brake switch.
CAUTION:
• Set the select lever in the P position.
• Depress the brake pedal.
3.
Pull the parking brake switch.
4.
Perform self-diagnosis for “EHS/PKB”.
Is DTC “C10E3” detected?
YES
>> Proceed to
NO-1
>> To check malfunction symptom before repair: Refer to
GI-44, "Intermittent Incident"
.
NO-2
>> Confirmation after repair: INSPECTION END
Diagnosis Procedure
INFOID:0000000010833656
1.
CHECK DATA MONITOR
With CONSULT
1.
Turn the ignition switch ON.
2.
Select “EHS/PKB”, “DATA MONITOR” and “PB SW” according to this order. Check that data monitor dis-
plays when parking brake switch is pull, neutral or push. Refer to
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> GO TO 2.
2.
CHECK PARKING BRAKE SWITCH CIRCUIT (1)
1.
Turn the ignition switch OFF.
2.
Disconnect the parking brake switch harness connector.
DTC
Display Item
(Trouble diagnosis content)
Malfunction detected condition
C10E3
PARKING BRAKE SWITCH
(Parking brake switch)
When the signal is not input even when the parking brake switch is operated.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст