Nissan Rogue (2023 year). Manual in english — page 12
3-8
Pre-driving checks and adjustments
WARNING
.
Radio waves could adversely af-
fect electric medical equipment.
Those who use a pacemaker
should contact the electric med-
ical equipment manufacturer for
the possible influences before
use.
.
The Intelligent Key transmits
radio waves when the buttons
are pushed. The FAA advises that
the radio waves may affect air-
craft navigation and communica-
tion systems. Do not operate the
Intelligent Key while on an air-
plane. Make sure the buttons are
not operated unintentionally
when the unit is stored during a
flight.
The Intelligent Key system can operate all
the door locks using the remote control-
ler function or pushing the request switch
(if so equipped) on the vehicle without
taking the key out from a pocket or purse.
The operating environment and/or con-
ditions may affect the Intelligent Key
system operation.
Be sure to read the following before using
the Intelligent Key system.
CAUTION
.
Be sure to carry the Intelligent
Key with you when operating the
vehicle.
.
Never leave the Intelligent Key in
the vehicle when you leave the
vehicle.
The Intelligent Key is always communi-
cating with the vehicle as it receives radio
waves. The Intelligent Key system trans-
mits weak radio waves. Environmental
conditions may interfere with the opera-
tion of the Intelligent Key system under
the following operating conditions.
.
When operating near a location where
strong radio waves are transmitted,
such as a TV tower, power station and
broadcasting station.
.
When in possession of wireless equip-
ment, such as a cellular phone, trans-
ceiver, and CB radio.
.
When the Intelligent Key is in contact
with or covered by metallic materials.
.
When any type of radio wave remote
control is used nearby.
.
When the Intelligent Key is placed near
an electric appliance such as a perso-
nal computer.
.
When the vehicle is parked near a
parking meter.
In such cases, correct the operating
conditions before using the Intelligent
Key function or use the mechanical key.
Although the life of the battery varies
depending on the operating conditions,
the battery’s life is approximately 2 years.
If the battery is discharged, replace it with
a new one.
When the Intelligent Key battery is low, an
indicator illuminates in the vehicle infor-
mation display. (See “4. Key Battery Low
warning” (P.2-35).)
Since the Intelligent Key is continuously
receiving radio waves, if the key is left
near equipment which transmits strong
radio waves, such as signals from a TV
and personal computer, the battery life
may become shorter.
For information regarding replacement of
a battery, see “Intelligent Key battery
replacement” (P.8-25).
As many as 4 Intelligent Keys can be
registered and used with one vehicle. For
information about the purchase and use
of additional Intelligent Keys, it is recom-
mended that you contact a NISSAN deal-
INTELLIGENT KEY SYSTEM
-------------------------------------------------------------------------------------------------------------------------------------------------------------
er.
CAUTION
.
Do not allow the Intelligent Key,
which contains electrical compo-
nents, to come into contact with
water or salt water. This could
affect the system function.
.
Do not drop the Intelligent Key.
.
Do not strike the Intelligent Key
sharply against another object.
.
Do not change or modify the
Intelligent Key.
.
Wetting may damage the Intelli-
gent Key. If the Intelligent Key
gets wet, immediately wipe until
it is completely dry.
.
If the outside temperature is be-
low 14°F (−10°C) degrees, the bat-
tery of the Intelligent Key may not
function properly.
.
Do not place the Intelligent Key
for an extended period in an area
where temperatures exceed
140°F (60°C).
.
Do not attach the Intelligent Key
with a key holder that contains a
magnet.
.
Do not place the Intelligent Key
near equipment that produces a
magnetic field, such as a TV,
audio equipment, personal com-
puters, cellular phone or wireless
charger.
If an Intelligent Key is lost or stolen,
NISSAN recommends erasing the ID code
of that Intelligent Key from the vehicle.
This may prevent the unauthorized use of
the Intelligent Key to operate the vehicle.
For information regarding the erasing
procedure, it is recommended that you
contact a NISSAN dealer.
For models with request switch: The
Intelligent Key function can be disabled.
For information about disabling the In-
telligent Key function, it is recommended
that you contact a NISSAN dealer.
Pre-driving checks and adjustments
3-9
-------------------------------------------------------------------------------------------------------------------------------------------------------------
3-10
Pre-driving checks and adjustments
WAD0230X
Example
INTELLIGENT KEY OPERATING
RANGE (models with request
switch)
The Intelligent Key functions can only be
used when the Intelligent Key is within
the specified operating range from the
request switch
.
When the Intelligent Key battery is dis-
charged or strong radio waves are pre-
sent near the operating location, the
Intelligent Key system’s operating range
becomes narrower, and the Intelligent
Key may not function properly.
The operating range is within 31.50 in (80
cm) from each request switch
.
If the Intelligent Key is too close to the
door glass, handle or rear bumper, the
request switches may not function.
When the Intelligent Key is within the
operating range, it is possible for anyone
who does not carry the Intelligent Key to
push the request switch to lock/unlock
the doors including the liftgate.
WAD0380X
DOOR LOCKS/UNLOCKS PRECAU-
TION (models with request switch)
.
Do not push the door handle request
switch with the Intelligent Key held in
your hand as illustrated. The close
distance to the door handle will cause
the Intelligent Key system to have
difficulty recognizing that the Intelli-
gent Key is outside the vehicle.
.
After locking with the door handle
request switch, verify the doors are
securely locked by testing them.
.
To prevent the Intelligent Key from
being left inside the vehicle, make sure
you carry the key with you and then
lock the doors.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
.
Do not pull the door handle before
pushing the door handle request
switch.
SPA2408
WAD0373X
Example
WAD0374X
Example
INTELLIGENT KEY OPERATION
(models with request switch)
You can lock or unlock the doors without
taking the key out from your pocket or
bag.
When you carry the Intelligent Key with
you, you can lock or unlock all doors by
pushing the door handle request switch
(located on the front and rear doors - if
so equipped) or liftgate request switch
within the range of operation.
When you lock or unlock the doors, the
hazard indicator will flash and the outside
chime will sound as a confirmation. For
details, see “Setting hazard indicator and
Pre-driving checks and adjustments
3-11
-------------------------------------------------------------------------------------------------------------------------------------------------------------
3-12
Pre-driving checks and adjustments
horn mode” (P.3-20).
Welcome light function
When you unlock the doors or the liftgate,
the daytime running lights, parking lights
and the tail lights will illuminate for a
period of time. The welcome light func-
tion can be disabled. For information
about disabling the welcome light func-
tion, see “Vehicle Settings” (P.2-28).
Locking doors
1.
Push the park button to engage the P
(Park) position. Place the ignition
switch in the OFF position and make
sure you carry the Intelligent Key with
you.
2.
Close all doors.
3. Push the door handle request switch
or the liftgate request switch
while carrying the Intelligent Key with
you.
4. All doors and the liftgate will lock.
5. The hazard indicator flashes twice
and the outside buzzer sounds twice.
NOTE:
.
Request switches can be deacti-
vated when the “Ext. Door Switch”
is turned off in the Vehicle Settings
of the vehicle information display.
For additional information, see “Ve-
hicle Settings” (P.2-28).
.
Doors lock with the door handle
request switch while the ignition
switch is not in the OFF position.
.
Doors do not lock by pushing the
driver’s door handle request switch
while the driver’s door is open. How-
ever, doors lock with the mechanical
key even if any door is open.
.
Doors do not lock with the door
handle request switch with the In-
telligent Key inside the vehicle and a
beep sounds to warn you. However,
when an Intelligent Key is inside the
vehicle, doors can be locked with
another Intelligent Key.
CAUTION
.
After locking the doors using the
request switch, make sure that
the doors have been securely
locked by operating the door
handles or the liftgate opener
switch.
.
When locking the doors using the
request switch, make sure to
have the Intelligent Key in your
possession before operating the
request switch to prevent the
Intelligent Key from being left in
the vehicle.
.
The request switch is operational
only when the Intelligent Key has
been detected by the Intelligent
Key system.
Unlocking doors
1.
Push the door handle request switch
or the liftgate request switch
while carrying the Intelligent Key with
you.
2.
The hazard indicator flashes once and
outside chime sounds once.
.
When the driver’s door handle re-
quest switch or the liftgate request
switch is pushed:
The corresponding door or the liftgate
will unlock.
.
When the other door handle re-
quest switch is pushed:
All doors and the liftgate will unlock.
3.
Push the driver’s door handle request
switch or the liftgate request switch
again within 1 minute.
4. The hazard indicator flashes once and
outside chime sounds once again. All
the doors and the liftgate will unlock.
All doors will be locked automatically
unless one of the following operations is
-------------------------------------------------------------------------------------------------------------------------------------------------------------
performed within 1 minute after pushing
the request switch while the doors are
locked.
.
Opening any door.
.
Pushing the ignition switch.
During this 1-minute time period, if the
UNLOCK
button on the Intelligent Key
is pushed, all doors will be locked auto-
matically after another 1 minute.
NOTE:
The unlocking operation can be chan-
ged in “Selective Unlock” under the
Vehicle Settings of the vehicle informa-
tion display. For additional information,
see “Vehicle Settings” (P.2-28).
Opening liftgate
1.
Carry the Intelligent Key.
2.
Push the liftgate opener switch
.
3.
The liftgate will unlock and then open.
WALK AWAY LOCK FUNCTION (if so
equipped)
When you walk away from the vehicle
with the Intelligent Key, the vehicle will be
locked automatically by the walk away
lock function. This function is disabled by
the default setting. You can enable this
function by the vehicle information dis-
play. For additional information, see “Ve-
hicle Settings” (P.2-28).
NOTE:
.
When the doors are locked by the
walk away lock function, the hazard
indicator flashes twice. Be sure to
confirm the door locks before you
leave the vehicle.
.
The walk away lock function may
not operate under the following
conditions:
—
When the door(s) and/or the lift-
gate are not closed securely.
—
When the engine is running.
—
When the Intelligent Key is placed
inside of the vehicle.
—
When you place the Intelligent
Key outside of the vehicle for a
period of time. (When a doors is
opened and closed, the walk away
lock function will activate.)
APPROACH UNLOCK FUNCTION (if
so equipped)
When you approach the vehicle with the
Intelligent Key, the vehicle will be un-
locked automatically by the approach
unlock function. This function is disabled
by the default setting. You can enable this
function by the vehicle information dis-
play. When this function is activated,
selective unlock is disabled. For additional
information, see “Vehicle Settings” (P.2-
28).
NOTE:
.
The approach unlock function may
not operate under the following
conditions:
—
When the Intelligent Key is placed
inside of the vehicle.
—
When you place the Intelligent
Key outside of the vehicle for a
period of time. (When a doors is
locked again after unlock, the
approach unlock function will ac-
tivate.)
—
When the engine is running (ex-
cept the remote engine start
function is performed).
—
When the vehicle has been stand-
ing still for several days.
—
When the doors are locked with
the power door lock switch.
BATTERY SAVER SYSTEM
When all the following conditions are met
for a period of time, the battery saver
system will cut off the power supply to
prevent battery discharge.
.
The ignition switch is in the ON posi-
tion. (See “Push-button ignition switch
positions” (P.5-16).)
Pre-driving checks and adjustments
3-13
-------------------------------------------------------------------------------------------------------------------------------------------------------------
3-14
Pre-driving checks and adjustments
WARNING LIGHTS AND AUDIBLE RE-
MINDERS
To help prevent the vehicle from moving
unexpectedly by erroneous operation of
the Intelligent Key listed on the following
chart or to help prevent the vehicle from
being stolen, chime or beep sounds inside
and outside the vehicle and the warning
display appears on the vehicle informa-
tion display.
When a chime or beep sounds or the
warning display appears, be sure to check
the vehicle and Intelligent Key.
See “Troubleshooting guide” (P.3-15) and
“Vehicle information display” (P.2-22).
-------------------------------------------------------------------------------------------------------------------------------------------------------------
TROUBLESHOOTING GUIDE
Verify the location of all Intelligent Keys that are programmed for the vehicle. If another Intelligent Key is in range or inside the vehicle,
the vehicle system may respond differently than expected.
Symptom
Possible cause
Action to take
When stopping the engine
The Shift to P range warning appears on
the display and the inside warning chime
sounds continuously.
The shift position is not in the P
(Park) position.
Push the park button to engage the P
(Park) position.
“No Key Press and Hold to Stop Engine”
message appears on the display.
The Intelligent Key is not inside the
vehicle.
Carry the Intelligent Key inside the
vehicle and push the ignition switch
once to stop the engine.
There is not the Intelligent Key or
the battery charge is low.
Rapidly push the ignition switch 3
consecutive times or push and hold
the ignition switch for more than 2
seconds to stop the engine.
When opening the driver’s
door to get out of the vehicle
The door/liftgate open warning appears
on the display.
The ignition switch is in the ON
position.
Place the ignition switch in the OFF
position.
When closing the door after
getting out of the vehicle
The No Key Detected warning appears
on the display, the outside chime sounds
three times and the inside warning
chime sounds for approximately 3 sec-
onds.
The engine is running.
Place the ignition switch in the OFF
position.
The Rear Door Alert warning message
appears on the display, the horn sounds
three times, pauses, and sounds three
more times, or a Check Rear Seat for All
Articles warning appears on the display.
The Rear Door Alert is activated.
Check the rear seat for all articles,
clear the Rear Door Alert warning
message by using the steering
switches.
When pushing the door han-
dle request switch (if so
equipped)
The outside chime sounds for approxi-
mately 3 seconds.
The Intelligent Key is inside the
vehicle.
Carry the Intelligent Key with you.
When pushing the ignition
switch to start the engine
The Key Battery Low warning appears
on the display.
The Intelligent Key battery charge
is low.
Replace the battery with a new one.
(See “Intelligent Key battery replace-
ment” (P.8-25).)
Pre-driving checks and adjustments
3-15
-------------------------------------------------------------------------------------------------------------------------------------------------------------
3-16
Pre-driving checks and adjustments
Symptom
Possible cause
Action to take
When pushing the ignition
switch
The Key System Error warning appears
on the display.
It warns of a malfunction with the
Intelligent Key system.
It is recommended that you contact a
NISSAN dealer.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
HOW TO USE REMOTE KEYLESS
ENTRY FUNCTION
WARNING
.
Radio waves could adversely af-
fect electric medical equipment.
Those who use a pacemaker
should contact the electric med-
ical equipment manufacturer for
the possible influences before
use.
.
The Intelligent Key transmits
radio waves when the buttons
are pushed. The FAA advises that
the radio waves may affect air-
craft navigation and communica-
tion systems. Do not operate the
Intelligent Key while on an air-
plane. Make sure the buttons are
not operated unintentionally
when the unit is stored during a
flight.
CAUTION
.
Do not allow the Intelligent Key,
which contains electrical compo-
nents, to come into contact with
water or salt water. This could
affect the system function.
.
Do not drop the Intelligent Key.
.
Do not strike the Intelligent Key
sharply against another object.
.
Do not change or modify the
Intelligent Key.
.
Wetting may damage the Intelli-
gent Key. If the Intelligent Key
gets wet, immediately wipe until
it is completely dry.
.
If the outside temperature is be-
low 14°F (-10°C) degrees, the bat-
tery of the Intelligent Key may not
function properly.
.
Do not place the Intelligent Key
for an extended period in an area
where temperatures exceed
140°F (60°C).
.
Do not attach the Intelligent Key
with a key holder that contains a
magnet.
.
Do not place the Intelligent Key
near equipment that produces a
magnetic field, such as a TV,
audio equipment, personal com-
puters, cellular phone or wireless
charger.
The remote keyless entry function can
operate all door locks using the remote
keyless entry function of the Intelligent
Key. The remote keyless entry function
can operate at a distance of approxi-
mately 33 ft (10 m) from the vehicle. (The
operating distance depends upon the
conditions around the vehicle.)
The remote keyless entry function will not
operate:
.
When the Intelligent Key is not within
the operational range.
.
When the Intelligent Key battery is
discharged.
The remote keyless entry function can
also operate the vehicle alarm.
Pre-driving checks and adjustments
3-17
-------------------------------------------------------------------------------------------------------------------------------------------------------------
3-18
Pre-driving checks and adjustments
WBD0049X
Type A (if so equipped)
WAD0376X
Type B (if so equipped)
WAD0377X
Type C (if so equipped)
LOCK button
UNLOCK button
Power liftgate button
PANIC button
Remote engine start button
When you lock or unlock the doors or the
liftgate, the hazard indicator will flash and
the horn will sound as a confirmation. For
details, see “Setting hazard indicator and
horn mode” (P.3-20).
Locking doors
1.
Place the ignition switch in the OFF
position.
2.
Carry the Intelligent Key with you.*
3.
Close all the doors.
4. Push the LOCK
button
on the
Intelligent Key.
5. All the doors and the liftgate will lock.
6. The hazard indicator flashes twice
and the horn chirps once.
*:
Doors will lock with the Intelligent Key
while the ignition switch is in the ON
position.
Operate the door handles to confirm that
the doors have been securely locked.
Unlocking doors
1.
Push the UNLOCK
button
on
the Intelligent Key once.
2.
The hazard indicator flashes once. The
driver’s door will unlock.
3.
Push the UNLOCK
button again
within 1 minute.
4. The hazard indicator flashes once. All
the doors and the liftgate will unlock.
All doors will be locked automatically
unless one of the following operations is
performed within 1 minute after pushing
the UNLOCK
button while the doors
are locked.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
.
Opening any door (including the lift-
gate).
.
Pushing the ignition switch.
During this 1-minute time period, if the
UNLOCK
button is pushed, all doors
will be locked automatically after another
1 minute.
NOTE:
The unlocking operation can be chan-
ged in “Selective Unlock” under the
Vehicle Settings of the vehicle informa-
tion display. For additional information,
see “Vehicle Settings” (P.2-28).
Opening/closing liftgate (if so
equipped)
1.
Push the power liftgate
button
for more than 1 second.
2.
The liftgate will automatically open.
The outside chime sounds 3 times for
approximately 3 seconds.
To close the liftgate, push the power
liftgate
button for more than 1
second.
The liftgate will automatically close.
If the
button is pushed while the
liftgate is being opened or closed, the
liftgate will immediately stop. Pushing the
button again will reverse the direc-
tion of the liftgate. However, when the
liftgate is near the fully open position, it
moves in the closing direction and when
the liftgate is near the fully close position,
it moves in the opening direction.
Using panic alarm
If you are near your vehicle and feel
threatened, you may activate the alarm
to call attention as follows:
1.
Push the PANIC
button
on the
Intelligent Key for
more than 0.5
seconds.
2.
The theft warning alarm and head-
lights will stay on for 25 seconds.
3.
The panic alarm stops when:
.
It has run for 25 seconds, or
.
Any of the buttons on the Intelligent
Key is pushed.
Remote engine start (if so
equipped)
The remote engine start
button
is
on the Intelligent Key if the vehicle has
remote engine start function. This func-
tion allows the engine to start from
outside the vehicle. See “Remote engine
start” (P.3-21).
WBD0037X
Intelligent Key button operation
light
The light blinks only when you push any
button on the Intelligent Key. The light
illumination only signifies that the Intelli-
gent Key has transmitted a signal. You
may look and/or listen to verify that the
vehicle has performed the intended op-
eration. If the light does not blink, your
battery may be too weak to communi-
cate to the vehicle. If this occurs, the
battery may need to be replaced.
For additional information regarding the
replacement of a battery, see “Intelligent
Key battery replacement” (P.8-25).
Pre-driving checks and adjustments
3-19
-------------------------------------------------------------------------------------------------------------------------------------------------------------
3-20
Pre-driving checks and adjustments
Setting hazard indicator and horn
mode
This vehicle is set in hazard indicator and
horn mode when you first receive the
vehicle.
In hazard indicator and horn mode, when
the LOCK
button
is pushed, the
hazard indicator flashes twice and the
horn chirps once. When the UNLOCK
button
is pushed, the hazard indicator
flashes once.
If horns are not necessary, the system
can be switched to the hazard indicator
mode.
In hazard indicator mode, when the LOCK
button is pushed, the hazard indica-
tor flashes twice. When the UNLOCK
button is pushed, neither the hazard
indicator nor the horn operates.
Hazard indicator and horn mode:
Operation
DOOR LOCK
DOOR UNLOCK
Pushing door handle request switch
or liftgate request switch (if so
equipped)
HAZARD -
twice
OUTSIDE CHIME -
twice
HAZARD -
once
OUTSIDE CHIME -
once
Walk away lock (if so equipped) or
approach unlock (if so equipped)
HAZARD -
twice
OUTSIDE CHIME -
twice
HAZARD -
once
OUTSIDE CHIME -
once
Pushing
or
button
HAZARD -
twice
HORN -
once
HAZARD -
once
HORN - none
Hazard indicator mode:
Operation
DOOR LOCK
DOOR UNLOCK
Pushing door handle request switch
(if so equipped)
or liftgate request switch
HAZARD -
twice
OUTSIDE CHIME - none
HAZARD - none
OUTSIDE CHIME - none
Walk away lock (if so equipped) or
approach unlock (if so equipped)
HAZARD -
twice
OUTSIDE CHIME - none
HAZARD -
once
HORN - none
Pushing
or
button
HAZARD -
twice
HORN - none
HAZARD - none
HORN - none
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Switching procedure:
To switch the hazard indicator and horn
(chime) operation, push the LOCK
and UNLOCK
buttons on the Intel-
ligent Key simultaneously for more than 4
seconds.
.
When the hazard indicator mode is
set, the hazard indicator flashes 3
times.
.
When the hazard indicator and horn
mode is set, the hazard indicator
flashes once and the horn chirps once.
The horn operation can also be turned on
or off in the vehicle information display.
See “Vehicle Settings” (P.2-28).
WARNING
To avoid risk of injury or death, do
not use the remote engine start
function when the vehicle is in an
enclosed area such as a garage.
WAD0378X
Example
The remote engine start
button is on
the Intelligent Key if the vehicle has
remote engine start function. This func-
tion allows the engine to start from
outside the vehicle.
Some systems, such as the air conditioner
system, will turn on during a remote
engine start, if the system was on the
last time the ignition switch was turned
off.
Laws in some local communities may
restrict the use of remote engine starters.
For example, some laws require a person
using remote engine start to have the
vehicle in view. Check local regulations for
any requirements.
Pre-driving checks and adjustments
3-21
REMOTE ENGINE START (if so equipped)
-------------------------------------------------------------------------------------------------------------------------------------------------------------
3-22
Pre-driving checks and adjustments
Other conditions may affect the remote
engine start function. See “Conditions the
remote engine start will not work” (P.3-
23).
Other conditions can affect the perfor-
mance of the Intelligent Key transmitter.
See “Intelligent Key system” (P.3-8) for
additional information.
REMOTE ENGINE START OPERATING
RANGE
The remote engine start function can
only be used when the Intelligent Key is
within the specified operating range from
the vehicle.
When the Intelligent Key battery is dis-
charged or other strong radio wave
sources are present near the operating
location, the Intelligent Key operating
range becomes narrower, and the Intelli-
gent Key may not function properly.
The remote engine start operating range
is approximately 197 ft (60 m) from the
vehicle.
REMOTE STARTING THE ENGINE
To use the remote start function to start
the engine, perform the following:
1.
If the doors are unlocked, push the
LOCK
button to lock all doors.
2.
Aim the Intelligent Key at the vehicle.
3. Push the LOCK
button again.
4. Within 5 seconds push and hold the
remote engine start
button until
the turn signal lights flash and the tail
lights illuminate. If the vehicle is not
within view, push and hold the remote
engine start
button for at least 2
seconds.
The following events will occur when the
engine starts:
.
The front parking lights will turn on
and remain on as long as the engine is
running.
.
The doors will be locked and the air
conditioner system may turn on.
.
The engine will continue to run for
about 10 minutes. Repeat the steps to
extend the time for an additional 10
minutes. See “Extending engine run
time” (P.3-22).
Depress and hold the brake pedal, then
place the ignition switch in the ON posi-
tion before driving. For further instruc-
tions, see “Driving the vehicle” (P.5-19).
EXTENDING ENGINE RUN TIME
The remote engine start function can be
extended one time by performing the
steps listed in “Remote starting the en-
gine” (P.3-22). Run time will be calculated
as follows:
.
The first 10 minute run time will start
when the remote engine start func-
tion is performed.
.
The second 10 minutes will start im-
mediately when the remote engine
start function is performed. For exam-
ple, if the engine has been running for
5 minutes, and 10 minutes are added,
the engine will run for a total of 15
minutes.
.
Extending engine run time will count
towards the two remote engine start
limit.
A maximum of two remote engine starts,
or a single start with an extension can be
used.
The vehicle needs to be driven at speeds
of 4 MPH (7 km/h) before the remote
engine start procedure can be used
again.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
CANCELING A REMOTE ENGINE
START
To cancel a remote engine start, perform
one of the following:
.
Aim the Intelligent Key at the vehicle
and push the remote engine start
button until the front parking lights
turn off.
.
Turn on the hazard indicator flashers.
.
Cycle the ignition switch ON and then
OFF.
.
The extended engine run time has
expired.
.
The first 10 minute timer has expired.
.
The engine hood has been opened.
.
The shift position is shifted out of the
P (Park) position.
.
The theft alarm sounds due to illegal
entry into the vehicle.
.
The ignition switch is pushed without
an Intelligent Key in the vehicle.
.
The ignition switch is pushed with an
Intelligent Key in the vehicle but the
brake pedal is not depressed.
.
The accelerator pedal is depressed.
.
The vehicle moves after a remote
engine start. (The hazard indicator
flashers blink once and the engine is
stopped.)
CONDITIONS THE REMOTE ENGINE
START WILL NOT WORK
The remote engine start will not operate
if any of the following conditions are
present:
.
The ignition switch is placed in the ON
position.
.
The hood is not securely closed.
.
The hazard indicator flashers are on.
.
The engine is still running. The engine
must be completely stopped. This is
not applicable when extending engine
run time.
.
The remote engine start
button is
not pushed and held for at least 2
seconds.
.
The remote engine start
button is
not pushed and held within 5 seconds
of pushing the LOCK
button.
.
The doors are not closed and locked.
(The hazard indicator flashers blink
twice to indicate the function is not
operated.)
.
The liftgate is open. (The hazard
indicator flashers blink twice to indi-
cate the function is not operated.)
.
The Key System Error warning mes-
sage remains on in the vehicle infor-
mation display.
.
The theft alarm sounds due to illegal
entry into the vehicle. (The hazard
indicator flashers blink twice to indi-
cate the function is not operated.)
.
Two remote engine starts, or a single
remote engine start with an exten-
sion, have already been used. (To use
the remote engine start function
again, the vehicle needs to be driven
at speeds of 4 MPH (7 km/h).)
.
The shift position is not in the P (Park)
position.
Pre-driving checks and adjustments
3-23
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст