Nissan Note E12. Manual — part 461
MWI-30
< WIRING DIAGRAM >
METER SYSTEM
AANIA1742GB
MWI
METER SYSTEM
MWI-31
< WIRING DIAGRAM >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
AANIA1743GB
MWI-32
< WIRING DIAGRAM >
METER SYSTEM
AANIA1744GB
MWI
DIAGNOSIS AND REPAIR WORK FLOW
MWI-33
< BASIC INSPECTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORK FLOW
Work Flow
INFOID:0000000009549347
OVERALL SEQUENCE
DETAILED FLOW
1.
CONFIRM SYMPTOM
Confirm symptom or customer complaint.
>> GO TO 2.
2.
SELF-DIAGNOSIS OF COMBINATION METER
Perform self-diagnosis of combination meter. Refer to
MWI-14, "On Board Diagnosis Function"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> If self-diagnosis will not start, check power supply and ground circuit of combination meter. Refer
to
MWI-39, "COMBINATION METER : Diagnosis Procedure"
. If power supply and ground circuits
are OK, replace combination meter. Refer to
MWI-48, "Removal and Installation"
.
3.
CHECK COMBINATION METER WITH CONSULT
Select METER/M&A on CONSULT and perform self-diagnosis of combination meter. Refer to
.
Is the inspection result normal?
YES
>> Check symptom. GO TO 4.
NO
>> Refer to
.
4.
CHECK SYSTEM OPERATION
Check the combination meter to verify that the repair has been completed successfully.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> GO TO 1.
AWNIA2458GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст