Nissan Note E12. Manual — part 579
DIAGNOSIS AND REPAIR WORK FLOW
SRC-21
< BASIC INSPECTION >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORK FLOW
Work Flow
INFOID:0000000009015649
OVERALL SEQUENCE
DETAILED FLOW
JMHIA1324GB
SRC-22
< BASIC INSPECTION >
DIAGNOSIS AND REPAIR WORK FLOW
1.
INTERVIEW THE CUSTOMER FOR THE SYMPTOM
Interview the customer for the symptom (the condition and the environment when the incident/malfunction
occurs).
>> GO TO 2.
2.
CHECK SYMPTOM
Check the symptom from the customer information.
>> GO TO 3.
3.
CHECK WARNING LAMP OPERATION
Check air bag warning lamp operation in the user mode.
Are any malfunction detected?
YES
>> GO TO 5.
NO
>> GO TO 4.
4.
CHECK LOW VOLTAGE
Check low voltage with CONSULT.
Are any malfunction detected?
YES
>> GO TO 9.
NO
>> Check intermittent incident. Refer to
GI-41, "Intermittent Incident"
.
5.
CHECK SELF DIAGNOSTIC RESULTS
Check self diagnostic result with CONSULT or diagnosis mode.
If it is impossible to switch to diagnosis mode, follow the same procedure that DTC is not detected.
NOTE:
Perform the following procedure if DTC is detected.
• Record DTC (Print them out with CONSULT.)
• Erase self diagnostic result.
• Study the relationship between the malfunction that DTC or air bag warning lamp indicates and the symptom
that the customer describes.
• Check related service bulletins for information.
Is DTC detected?
YES
>> GO TO 6.
NO
>> GO TO 7.
6.
PERFORM DTC CONFIRMATION PROCEDURE
Perform DTC CONFIRMATION PROCEDURE for the DTC.
>> GO TO 8.
7.
PERFORM DIAGNOSIS ACCORDING TO WARNING LAMP OPERATION
1. Check air bag warning lamp operation in the user mode.
2. Perform Diagnosis Procedure for the air bag warning lamp operation.
>> GO TO 9.
8.
DETECT MALFUNCTIONING PART BY DIAGNOSTIC PROCEDURE
Inspect according to Diagnostic Procedure of the DTC.
>> GO TO 9.
9.
REPAIR OR REPLACE THE MALFUNCTION PART
Repair or replace the malfunctioning part.
DIAGNOSIS AND REPAIR WORK FLOW
SRC-23
< BASIC INSPECTION >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
>> GO TO 10.
10.
FINAL CHECK
Check self diagnostic result and air bag warning lamp operation in the user mode.
Is the malfunction repaired?
YES
>> Inspection End.
NO
>> GO TO 2.
SRC-24
< BASIC INSPECTION >
INTERMITTENT INCIDENT
INTERMITTENT INCIDENT
Inspection Procedure
INFOID:0000000009518941
INTERMITTENT TROUBLE
An intermittent incident may have occurred in the past but is not being detected currently. This DTC will not be
detected on SELF-DIAG [CURRENT], but may be viewed on SELF-DIAG [PAST] if the DTC has not been
SRC-11, "Trouble Diagnosis with CONSULT"
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст