Nissan Note E12. Manual — part 617
TM-26
< UNIT DISASSEMBLY AND ASSEMBLY >
[5MT: RS5F91R]
TRANSAXLE ASSEMBLY
MAINSHAFT AND GEAR
1.
Input shaft front bearing
2.
Input shaft
3.
Snap ring
4.
Input shaft rear bearing
5.
Adapter plate
6.
Bushing
7.
5th input gear
8.
5th-reverse baulk ring
9.
Synchronizer lever
10. 5th-reverse synchronizer hub
11. 5th-reverse coupling sleeve
12. Lock washer
13. Retaining pin
14. Reverse gear
: Apply gear oil.
: Replace the parts as a set.
JPDIC0820GB
TRANSAXLE ASSEMBLY
TM-27
< UNIT DISASSEMBLY AND ASSEMBLY >
[5MT: RS5F91R]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
SHIFT FORK AND FORK ROD
1.
Mainshaft front bearing
2.
Mainshaft
3.
1st main gear
4.
1st inner baulk ring
5.
1st synchronizer cone
6.
1st outer baulk ring
7.
1st-2nd synchronizer hub
8.
1st-2nd coupling sleeve
9.
Spring
10. Insert key
11. 2nd outer baulk ring
12. 2nd synchronizer cone
13. 2nd inner baulk ring
14. Snap ring
15. Thrust washer
16. 2nd main gear
17. 3rd main gear
18. 3rd baulk ring
19. 3rd-4th synchronizer hub
20. 3rd-4th coupling sleeve
21. 4th baulk ring
22. 4th main gear
23. Spacer
24. Mainshaft rear bearing
25. 5th main gear
: Apply gear oil.
: Replace the parts as a set.
JPDIC0531GB
TM-28
< UNIT DISASSEMBLY AND ASSEMBLY >
[5MT: RS5F91R]
TRANSAXLE ASSEMBLY
FINAL DRIVE
1.
Retaining pin
2.
1st-2nd shift fork
3.
Bushing
4.
1st-2nd fork rod
5.
Lock pin
6.
5th-reverse fork rod
7.
5th-reverse shift fork
8.
Check ball
9.
3rd-4th shift fork
10. 3rd-4th fork rod
11. Control shaft
12. O-ring
13. Selector
14. Check ball plug
15. Bushing
16. Spring
17. Gear catch
: Apply gear oil.
: Apply Genuine Silicone RTV or equivalent. Refer to
GI-22, "Recommended Chemical Products and Sealants"
: Replace the parts as a set.
AWBIA1480ZZ
TRANSAXLE ASSEMBLY
TM-29
< UNIT DISASSEMBLY AND ASSEMBLY >
[5MT: RS5F91R]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
Disassembly
INFOID:0000000009417605
1. Remove drain plug and gasket from clutch housing using suitable tool, and drain gear oil.
2. Remove filler plug and gasket from transaxle case.
3. Remove rear housing and O-ring.
CAUTION:
Remove in direction of input shaft (
) as shown. Rear
housing oil channel is inserted to input shaft center hole.
4. Move the shifter lever A (1) to the 3rd gear position.
NOTE:
• If it is not moved to the 3rd gear position, transaxle case can-
not be removed from clutch housing.
• The 3rd gear position means that shifter lever A is fully rotated
clockwise and it is returned approximately 10 degrees.
1.
Differential side bearing outer race
2.
Differential side bearing
3.
Final drive
: Replace the parts as a set.
JPDIC0481ZZ
SCIA1709J
PCIB1524E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст