Nissan Note E12. Manual — part 457
MWI-14
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (COMBINATION METER)
DIAGNOSIS SYSTEM (COMBINATION METER)
On Board Diagnosis Function
INFOID:0000000009549344
ON BOARD DIAGNOSIS ITEM
Information display, speedometer and tachometer can be checked in self-diagnosis mode.
STARTING COMBINATION METER SELF-DIAGNOSIS MODE
METHOD OF STARTING
1. Turn ignition switch ON, and switch the trip meter to “trip A” or “trip B”.
2. Turn ignition switch to OFF.
3. While pressing the meter control switch (1), turn the ignition
switch ON.
4. Make sure that the trip meter displays “0000.0”.
5. Press the meter control switch (1) at least 3 times. (Within 7 sec-
onds after the ignition switch is turned ON).
6. The combination meter is turned to self-diagnosis mode.
• All segments of the information display and shift position indi-
cator (A) for CVT models are displayed.
NOTE:
• Check combination meter power supply and ground circuit when the self-diagnosis mode of the combination
meter does not start. replace combination meter if power supply and ground circuit are normal.
• If any of the segments are not displayed, replace combination meter.
7. Each meter activates by pressing the meter control switch.
JSNIA3904ZZ
JSNIA3900ZZ
AWNIA2440ZZ
MWI
DIAGNOSIS SYSTEM (COMBINATION METER)
MWI-15
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
NOTE:
• If any of the meters or gauges is not activated, replace combination meter.
• The figure is reference.
CONSULT Function
INFOID:0000000009549345
APPLICATION ITEMS
CONSULT can display each diagnostic item using the diagnostic test modes shown.
SELF DIAG RESULT
.
DATA MONITOR
Display Item List
X: Applicable
METER/M&A Diagnosis mode
Description
SELF DIAGNOSTIC RESULT
The combination meter self-diagnosis results.
Data Monitor
Displays combination meter input/output data in real time.
Warning History
Lighting history of the warning lamp and indicator lamp can be checked.
Display item [Unit]
MAIN
SIGNALS
Description
SPEED METER
[km/h] or [mph]
X
Displays the value of vehicle speed signal.
SPEED OUTPUT
[km/h] or [mph]
X
Displays the value of vehicle speed signal, which is transmitted to each unit with
CAN communication.
ODO OUTPUT
[km/h or mph]
Displays odometer signal value transmitted to other units via CAN communica-
tion.
TACHO METER
[rpm]
X
Displays the value of engine speed signal, which is input from ECM.
FUEL METER
[L]
X
Displays the fuel level.
W TEMP METER
[
°C] or [°F]
X
Displays the value of engine coolant temperature signal, which is input from ECM.
ABS W/L
[ON/OFF]
Displays [ON/OFF] condition of ABS warning indicator
BRAKE W/L
[ON/OFF]
Displays [ON/OFF] condition of brake warning indicator.
DOOR W/L
[ON/OFF]
Displays [ON/OFF] condition of door warning indicator.
HI-BEAM IND
[ON/OFF]
Displays [ON/OFF] condition of high beam indicator.
TURN IND
[ON/OFF]
Displays [ON/OFF] condition of turn indicator.
LIGHT IND
[ON/OFF]
Displays [ON/OFF] condition of light indicator.
OIL W/L
[ON/OFF]
Displays [ON/OFF] condition of engine oil pressure warning indicator.
MIL
[ON/OFF]
Displays [ON/OFF] condition of malfunction indicator.
CRUISE IND
[Off]
Displays [ON/OFF] condition of CRUISE indicator.
O/D OFF IND
[ON/OFF]
Displays [ON/OFF] condition of O/D OFF indicator.
MWI-16
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (COMBINATION METER)
NOTE:
Some items are not available according to vehicle specification.
WARNING HISTORY
W/L ON HISTORY
• Stores histories when warning/indicator lamp is turned on.
• “W/L ON HISTORY” indicates the “TIME” when the warning/ indicator lamp is turned on.
• The “TIME” above is:
- 0: The condition that the warning/indicator lamp has been turned on 1 or more times after starting the engine
and waiting for 30 seconds.
- 1 - 39: The number of times the engine was restarted after the 0 condition.
- NO W/L ON HISTORY: Stores NO (0) turning on history of warning/indicator lamp.
NOTE:
• W/L ON HISTORY is not stored for approximately 30 seconds after the engine starts.
• Brake warning lamp does not store any history when the parking brake is applied or the brake fluid level gets
low.
FUEL W/L
[ON/OFF]
Displays [ON/OFF] condition of low-fuel warning indicator.
O/D OFF SW
[ON/OFF]
Displays [ON/OFF] condition of O/D OFF switch.
REAR DEF SW
[ON/OFF]
Displays [ON/OFF] condition of rear window defogger switch.
BRAKE SW
[ON/OFF]
Displays [ON/OFF] condition of brake switch.
EPS W/L
[ON/OFF]
Displays [ON/OFF] condition of EPS indicator.
CHAGE W/L
[Off]
Displays [ON/OFF] condition of charge warning indicator.
SHIFT IND
[P, R, N, D, L]
Displays shift selector position.
FUEL CAP W/L
[Off]
Displays [ON/OFF] condition of loose fuel cap warning message.
PKB SW
[ON/OFF]
Status of parking brake switch.
BUCKLE SW
[ON/OFF]
Status of seat belt buckle switch (LH).
BRAKE OIL SW
[ON/OFF]
Status of brake fluid level switch.
DISTANCE
[km] or [Mi]
Displays distance to empty.
BUZZER
[ON/OFF]
X
Displays [ON/OFF] condition of buzzer.
FR FOG IND
[ON/OFF]
Displays [ON/OFF] condition of front fog lamp indicator.
KEY G/Y W/L
[ON/OFF]
Displays [ON/OFF] condition of Intelligent Key warning lamp.
Display item [Unit]
MAIN
SIGNALS
Description
Display item
Description
W/L ON HISTORY
Lighting history of warning lamp and indicator lamp can be checked.
MWI
COMBINATION METER
MWI-17
< ECU DIAGNOSIS INFORMATION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
ECU DIAGNOSIS INFORMATION
COMBINATION METER
Reference Value
INFOID:0000000009015874
VALUES ON THE DIAGNOSIS TOOL
Monitor Item
Display content
Data monitor
Condition
Reference value in normal operation
SPEED METER
[km/h or mph]
Speed meter
operation
While driving
Vehicle speed matches speed meter
SPEED OUTPUT
[km/h or mph]
Vehicle speed
While driving
The speed output signal value via CAN
communication is approx. value of ve-
hicle speed.
ODO OUTPUT
[km/h or mph]
ODO meter op-
eration
Driving
Distance driven
TACHO METER
[rpm]
Tacho meter
operation
Engine running
The tacho meter is approx. value of en-
gine speed via CAN communication.
FUEL METER
[L]
Fuel level
Ignition ON
Fuel level is approx. value of fuel
gauge.
W TEMP METER
[
°C] or [°F]
Engine coolant
temperature
Engine running
Input value of engine coolant tempera-
ture signal via CAN communication.
ABS W/L
ABS warning
lamp
When ABS warning lamp is ON
On
When ABS warning lamp is OFF
Off
BRAKE W/L
Brake warning
lamp
When Brake warning lamp is ON
On
*
When Brake warning lamp is OFF
Off
DOOR W/L
Door open
warning lamp
When Door warning lamp is ON
On
When Door warning lamp is OFF
Off
HI-BEAM IND
HI-Beam indi-
cator lamp
When High-beam indicator lamp is ON
On
When High-beam indicator lamp is OFF
Off
TURN IND
Turn signal in-
dicator
When Turn signal indicator lamp is ON
On
When Turn signal indicator lamp is OFF
Off
LIGHT IND
Light indicator
When Tail lamp indicator lamp is ON
On
When Tail lamp indicator lamp is OFF
Off
FR FOG IND
Front fog lamp
indicator
Front fog lamp indicator lamp ON
On
Front fog lamp indicator lamp OFF
Off
OIL W/L
Engine oil pres-
sure warning
light
When engine oil pressure warning lamp is
ON
On
When engine oil pressure warning lamp is
OFF
Off
MIL
MIL warning
lamp
When Malfunction indicator lamp (MIL) is
ON
On
When Malfunction indicator lamp (MIL) is
OFF
Off
CRUISE IND
Cruise indicator
lamp
When cruise indicator lamp is ON.
ON
When cruise indicator lamp is OFF.
Off
O/D OFF IND
O/D OFF indi-
cator
When O/D OFF indicator lamp is OFF.
Off
When O/D OFF indicator lamp is ON.
On
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст