Nissan Note E12. Manual — part 5
AV-12
< SYSTEM DESCRIPTION >
[BASE AUDIO]
DIAGNOSIS SYSTEM (AUDIO UNIT)
3. While pressing the preset 6 button, turn the volume control dial
clockwise or counterclockwise 30 clicks or more.
4. Initially, the communication diagnosis mode is displayed.
5. To exit communication diagnosis, turn the ignition OFF.
SELF DIAGNOSIS MODE
Hardware/Software Versions
1. Press the DISP button to enter versions display, and the audio
head unit software version is displayed.
2. With each additional press of the DISP button, the following information is available:
-
HARD V###### (hardware version)
-
EEP V###### (EEPROM version)
-
@@@@ EQ1-4 # (EQ pin info)
If an EQ error is present, INVALID EQ is displayed
3. Hold the DISP button down to return to all display segments screen.
Speaker Channel Check
ALNIA1516ZZ
ALNIA1387GB
ALNIA1383GB
AV
DIAGNOSIS SYSTEM (AUDIO UNIT)
AV-13
< SYSTEM DESCRIPTION >
[BASE AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
1. Press the RPT/DRM button to enter speaker channel check, and
the front left tweeter (front tweeter LH) is displayed.
2. With each additional press of the RPT/DRM button, the following information is available:
-
FR RIGHT TWEETER (front tweeter RH)
-
FR RIGHT (front door speaker RH)
-
RR RIGHT (rear speaker RH)
-
RR LEFT (rear speaker LH)
-
FR LEFT (front door speaker LH)
3. Hold the RPT/DRM button down to return to all display segments screen.
Communication Diagnosis
1. Press the DISP button, and the M-CAN message transmission
error history screen is displayed.
2. Press the DISP button again, and the TEL $$ nn (CMF message reception error history from M-CAN TEL)
screen is displayed.
3. Press the DISP button again, and the TROUBLE DEL. (deletion of M-CAN message communication his-
tory) screen is displayed. To retain the M-CAN message communication history and return to the commu-
nication diagnosis mode screen, press the DISP button.
4. To proceed to the M-CAN message communication history deletion screen, press the SEEK/TRACK
button. The REC DEL-NO? (selection of M-CAN message communication history deletion) screen is dis-
played. To cancel M-CAN message communication history deletion, wait 6 seconds and you will be
returned to the TROUBLE DEL. (deletion of M-CAN message communication history) screen. To proceed
with M-CAN message communication history deletion, press the SEEK/TRACK button again.
5. The REC DEL-YES?@ (selection of M-CAN message communication history deletion) screen is dis-
played. To cancel M-CAN message communication history deletion, press the SEEK/TRACK button
and you will be returned to the REC DEL-NO? (selection of M-CAN message communication history dele-
tion) screen. To proceed with M-CAN message communication history deletion, wait 6 seconds and the
communication history deletion will be executed. After the communication history deletion has been exe-
cuted, you will be returned to the TROUBLE DEL. (deletion of M-CAN message communication history)
screen. To return to the communication diagnosis mode screen, press the DISP button.
ALNIA1384GB
ALNIA1386GB
AV-14
< ECU DIAGNOSIS INFORMATION >
[BASE AUDIO]
AUDIO UNIT
ECU DIAGNOSIS INFORMATION
AUDIO UNIT
Reference Value
INFOID:0000000009460110
TERMINAL LAYOUT
PHYSICAL VALUES
AWNIA3055ZZ
Terminal
(Wire color)
Description
Condition
Reference value
(Approx.)
+
–
Signal name
Input/
Output
Ignition
switch
Operation
2
(GR)
3
(P)
Sound signal front speaker
LH
Output
ON
Sound output.
4
(W)
5
(R)
Sound signal rear speaker
LH
Output
ON
Sound output.
7
(W)
Ground
ACC power supply
Input
ACC
—
Battery voltage
9
(LG/R)
Ground Illumination control signal
Input
ON
Headlamps ON.
Battery voltage
11
(O)
12
(V)
Sound signal front speaker
RH
Output
ON
Sound output.
SKIA0177E
SKIA0177E
SKIA0177E
AV
AUDIO UNIT
AV-15
< ECU DIAGNOSIS INFORMATION >
[BASE AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
13
(L)
14
(Y)
Sound signal rear speaker
RH
Output
ON
Sound output.
18
(LG)
Ground Vehicle speed signal
Input
ON
When vehicle speed is ap-
prox. 40 km/h (25 MPH).
19
(Y)
Ground
Battery power supply
Input
OFF
—
Battery voltage
21
(B/W)
Ground EQ1 Ground
—
ON
—
0 V
23
(B)
Ground EQ3 Ground
—
ON
—
0 V
37
(B)
Ground Antenna amp. ON signal
Output
ON
Audio unit ON, AM or FM
selected.
Battery voltage
38
(B)
Ground AM/FM antenna signal
Input
ON
Audio unit ON, AM or FM
selected.
5.0 V
Terminal
(Wire color)
Description
Condition
Reference value
(Approx.)
+
–
Signal name
Input/
Output
Ignition
switch
Operation
SKIA0177E
JSNIA0012GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст