Nissan Pathfinder. Manual — part 370
DLK-246
< SYMPTOM DIAGNOSIS >
HAZARD AND HORN REMINDER DOES NOT OPERATE
HAZARD AND HORN REMINDER DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000009175821
1.
CHECK “HAZARD ANSWER BACK” SETTING IN “WORK SUPPORT”
1. Select “INTELLIGENT KEY” of “BCM” using CONSULT.
2. Select “HAZARD ANSWER BACK” in “WORK SUPPORT” mode.
3. Check the “HAZARD ANSWER BACK” setting in “WORK SUPPORT”.
BCS-21, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Set the “Lock Only”, “Unlock Only” or “Lock/Unlock” in “HAZARD ANSWER BACK”.
2.
CHECK “HORN WITH KEYLESS LOCK” SETTING IN “WORK SUPPORT”
1. Select “INTELLIGENT KEY” of “BCM” using CONSULT.
2. Select “HORN WITH KEYLESS LOCK” in “WORK SUPPORT” mode.
3. Check the “HORN WITH KEYLESS LOCK” in “WORK SUPPORT”.
BCS-21, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Set the “On” in “HORN WITH KEYLESS LOCK”.
3.
CHECK HAZARD FUNCTION
Check hazard function.
DLK-206, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK HORN FUNCTION
Check horn function.
SEC-135, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
REPLACE BCM
• Replace BCM. Refer to
BCS-80, "Removal and Installation"
.
• Confirm the operation after replacement.
Is the result normal?
YES
>> Inspection End.
NO
>> Check intermittent incident. Refer to
GI-49, "Intermittent Incident"
.
HAZARD AND BUZZER REMINDER DOES NOT OPERATE
DLK-247
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
HAZARD AND BUZZER REMINDER DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000009175822
1.
CHECK “HAZARD ANSWER BACK” SETTING IN “WORK SUPPORT”
1. Select “INTELLIGENT KEY” of “BCM” using CONSULT.
2. Select “HAZARD ANSWER BACK” in “WORK SUPPORT” mode.
3. Check the “HAZARD ANSWER BACK” setting in “WORK SUPPORT”.
BCS-21, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Set the “Lock Only”, “Unlock Only” or “Lock/Unlock” in “HAZARD ANSWER BACK”.
2.
CHECK “ANS BACK I-KEY LOCK” SETTING IN “WORK SUPPORT”
1. Select “INTELLIGENT KEY” of “BCM” using CONSULT.
2. Select “ANS BACK I-KEY LOCK” in “WORK SUPPORT” mode.
3. Check the “ANS BACK I-KEY LOCK”setting in “WORK SUPPORT”.
BCS-21, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Set the “Horn Chirp” or “Buzzer” in “ANS BACK I-KEY LOCK”.
3.
CHECK “ANS BACK I-KEY UNLOCK” SETTING IN “WORK SUPPORT”
1. Select “INTELLIGENT KEY” of “BCM” using CONSULT.
2. Select “ANS BACK I-KEY UNLOCK” in “WORK SUPPORT” mode.
3. Check the “ANS BACK I-KEY UNLOCK” setting in “WORK SUPPORT”.
BCS-21, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Set the “On” in “ANS BACK I-KEY UNLOCK”.
4.
CHECK HAZARD FUNCTION
Check hazard function.
DLK-206, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
CHECK INTELLIGENT KEY WARNING BUZZER
Check Intelligent Key warning buzzer.
DLK-201, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair or replace the malfunctioning parts.
6.
REPLACE BCM
• Replace BCM. Refer to
BCS-80, "Removal and Installation"
.
• Confirm the operation after replacement.
Is the result normal?
YES
>> Inspection End.
NO
>> Check intermittent incident. Refer to
GI-49, "Intermittent Incident"
.
DLK-248
< SYMPTOM DIAGNOSIS >
KEY REMINDER FUNCTION DOES NOT OPERATE
KEY REMINDER FUNCTION DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000009175823
1.
CHECK “ANTI KEY LOCK IN FUNCTI” SETTING IN “WORK SUPPORT”
1. Select “INTELLIGENT KEY” of “BCM” using CONSULT.
2. Select “ANTI KEY LOCK IN FUNCTI” in “WORK SUPPORT” mode.
3. Check “ANTI KEY LOCK IN FUNCTI” setting in “WORK SUPPORT”.
BCS-21, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Set “On” in “ANTI KEY LOCK IN FUNCTI”.
2.
CHECK INSIDE KEY ANTENNA
Check inside key antenna.
• Instrument center: Refer to
.
• Console: Refer to
• Luggage room: Refer to
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK UNLOCK SENSOR
Check unlock sensor.
DLK-189, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
REPLACE BCM
• Replace BCM. Refer to
BCS-80, "Removal and Installation"
.
• Confirm the operation after replacement.
Is the result normal?
YES
>> Inspection End.
NO
>> Check intermittent incident. Refer to
GI-49, "Intermittent Incident"
.
WELCOME LIGHT FUNCTION DOES NOT OPERATE
DLK-249
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
WELCOME LIGHT FUNCTION DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000009175824
1.
CHECK “WELCOME LIGHT OP SET” SETTING IN “WORK SUPPORT”
1. Select “INTELLIGENT KEY” of “BCM” using CONSULT.
2. Select “WELCOME LIGHT OP SET” in “WORK SUPPORT” mode.
3. Check “WELCOME LIGHT OP SET” setting in “WORK SUPPORT”.
BCS-21, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Set “On” and “WELCOME LIGHT SELECT” in “WORK SUPPORT”.
2.
CHECK “WELCOME LIGHT SELECT” SETTING IN “WORK SUPPORT”
1. Select “INTELLIGENT KEY” of “BCM” using CONSULT.
2. Select “WELCOME LIGHT SELECT” in “WORK SUPPORT” mode.
3. Check “WELCOME LIGHT SELECT” setting in “WORK SUPPORT”.
BCS-21, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Set “WELCOME LIGHT SELECT” setting in “WORK SUPPORT”.
3.
CHECK INSIDE KEY ANTENNA
Check inside key antenna.
.
.
• Luggage room: Refer to
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK OUTSIDE KEY ANTENNA
Check outside key antenna.
• Driver side: Refer to
DLK-166, "Component Function Check"
.
DLK-164, "Component Function Check"
.
• Back door: Refer to
DLK-168, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
CHECK REMOTE KEYLESS ENTRY FUNCTION
Check remote keyless entry function
Does door lock/unlock with Intelligent Key button?
YES
>> GO TO 6.
NO
>> Refer to
DLK-238, "Diagnosis Procedure"
6.
CHECK INTERIOR ROOM LAMP CONTROL SYSTEM
Check interior room lamp control system. Refer to
INL-6, "INTERIOR ROOM LAMP CONTROL SYSTEM :
Does the room lamp and puddle lamp turn ON?
YES
>> GO TO 7.
NO
>> Refer to
7.
REPLACE BCM
• Replace BCM. Refer to
BCS-80, "Removal and Installation"
.
• Confirm the operation after replacement.
Is the result normal?
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст