Nissan Pathfinder. Manual — part 271
BODY COMPONENT PARTS
BRM-17
< PREPARATION >
C
D
E
F
G
H
I
J
L
M
A
B
BRM
N
O
P
Item
Part name
Material
1.
Roof corner reinforcement (LH)
SP121BQ
2.
Rear roof rail assembly
—
3.
Roof corner reinforcement (RH)
SP121BQ
4.
6th roof bow, standard roof
SP129BQ
5.
5th roof bow, standard roof
SP129BQ
6.
Standard roof
SP121AQ
7.
4th roof bow, standard roof
SP129BQ
8.
3rd roof bow, standard roof
SP123BQ
9.
Roof reinforcement assembly, standard roof
SP121BQ
10.
Front roof rail assembly
—
11.
Panoramic roof
SP121AQ
12.
Rear roof reinforcement assembly
SP121BQ
13.
Rear wheel inner assembly (RH, LH)
—
14.
Rear wheel inner front extension
SP781B
15.
Inner sill (RH, LH)
RP783-980
16.
Hood assembly
—
17.
Inner roof side rail complete (RH, LH)
—
18.
Center pillar inner (RH, LH)
SP153-980, SP783-590Q
19.
Front hinge pillar reinforcement assembly (RH, LH)
—
20.
Front pillar upper hinge brace (RH, LH)
SP153-590Q
21.
Front pillar lower hinge brace (RH, LH)
SP152-440Q
22.
Outer sill reinforcement assembly (RH, LH)
—
23.
Roof side outer reinforcement assembly (RH, LH)
—
24.
Center pillar reinforcement (RH, LH)
—
25.
Front body side outer (RH, LH)
SP782AMJQ
26.
Front door assembly (RH, LH)
—
27.
Front door outer (RH, LH)
SP785-340AMQ
28.
Rear door outer (RH, LH)
SP785-340AMQ
29.
Rear door assembly (RH, LH)
—
30.
Rear body side outer
SP782AMJQ
31.
Fuel filler base
SP1212BQ
32.
Striker retainer (RH, LH)
SP121BQ
33.
Rear wheel outer assembly
—
34.
Rear outer sill reinforcement assembly (RH, LH)
SP782-440Q
35.
Rear fender cover lower (RH, LH)
SP782AMJQ
36.
Rear fender cover upper (RH, LH)
SP782AMJQ
37.
Outer back pillar assembly (RH, LH)
—
38.
Rear pillar inner reinforcement assembly (RH, LH)
—
39.
Rear pillar seat belt anchor assembly (RH, LH)
SP231-370Q
40.
Rear fender brace (RH, LH)
SP221BQ
41.
Inner back pillar assembly (RH, LH)
—
42.
Inner rear pillar (RH, LH)
—
43.
Main back pillar assembly (RH, LH)
SP121BQ
44.
Rear combination lamp base assembly (RH, LH)
—
45.
Rear panel assembly
—
46.
Back door inner assembly
—
47.
Back door outer assembly
SP783
BRM-18
< REMOVAL AND INSTALLATION >
CORROSION PROTECTION
REMOVAL AND INSTALLATION
CORROSION PROTECTION
Description
INFOID:0000000009176371
To provide improved corrosion prevention, the following anti-corrosive measures have been implemented in
NISSAN production plants. When repairing or replacing body panels, it is necessary to use the same anti-cor-
rosive measures.
Anti-Corrosive Precoated Steel (Galvannealed Steel)
To improve repairability and corrosion resistance, a new type of anti-
corrosive precoated steel sheet has been adopted, replacing con-
ventional zinc-coated steel sheet.
Galvannealed steel is electroplated and heated to form zinc-iron
alloy, which provides excellent and long term corrosion resistance
with cationic electrodeposition primer.
Nissan Genuine Service Parts are fabricated from galvannealed steel. Therefore, it is recommended that
GENUINE NISSAN PARTS or equivalent be used for panel replacement to maintain the anti-corrosive perfor-
mance built into the vehicle at the factory.
Phosphate Coating Treatment and Cationic Electrodeposition Primer
A phosphate coating treatment and a cationic electrodeposition primer, which provide excellent corrosion pro-
tection, are employed on all body components.
CAUTION:
Confine paint removal during welding operations to an absolute
minimum.
Nissan Genuine Service Parts are also treated in the same manner. Therefore, it is recommended that GENU-
INE NISSAN PARTS or equivalent be used for panel replacement to maintain anti-corrosive performance built
into the vehicle at the factory.
Anti-Corrosive Wax
INFOID:0000000009176372
To improve corrosion resistance, anti-corrosive wax is applied inside the body sill and inside other closed sec-
tions. Accordingly, when replacing these parts, be sure to apply anti-corrosive wax to the appropriate areas of
the new parts. Select an excellent anti-corrosive wax which will penetrate after application and has a long shelf
life.
SIIA2294E
PIIA0095E
CORROSION PROTECTION
BRM-19
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
BRM
N
O
P
Undercoating
INFOID:0000000009176373
The underside of the floor and wheelhouse are undercoated to prevent rust, vibration, noise and stone chip-
ping. Therefore, when such a panel is replaced or repaired, apply undercoating to that part. Use an undercoat-
ing which is rust preventive, soundproof, vibration-proof, shock-resistant, adhesive, and durable.
Precautions in Undercoating
1. Do not apply undercoating unless specified. Avoid areas such as the areas above the muffler and three-
way catalyst which are subjected to heat.
2. Do not undercoat the exhaust pipe or other parts which become hot.
3. Do not undercoat rotating parts.
4. Apply bitumen wax after applying undercoating.
5. After putting seal on the vehicle, put undercoating on it.
1.
Body caulk
2.
Anti-corrosive wax
3.
Panel adhesive
ALKIA2405ZZ
BRM-20
< REMOVAL AND INSTALLATION >
CORROSION PROTECTION
Undercoated areas are shaded.
ALKIA2437ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст