Nissan Pathfinder. Manual — part 1107
COMPONENT PARTS
ST-7
< SYSTEM DESCRIPTION >
C
D
E
F
H
I
J
K
L
M
A
B
ST
N
O
P
HEATED STEERING WHEEL SYSTEM : Component Parts Location
INFOID:0000000009177059
HEATED STEERING WHEEL SYSTEM : Component Description
INFOID:0000000009177060
1.
A/C Auto amp
(view with cluster lid C removed)
2.
Heated steering wheel switch
3.
Heated steering wheel
4.
Spiral cable
5.
Heated steering relay
AWGIA0230ZZ
Components
Description
A/C Auto amp
Controls the heated steering relay by providing a ground signal to the coil.
Heated steering wheel switch
• Controls the heated steering relay by providing a ground signal to A/C Auto amp.
• Provides switch indicator for system.
Heated steering relay
Provides battery power supply to heated steering wheel and switch indicator.
Heated steering wheel
Contains heating element and over-heat protection.
Spiral cable
Provides rotating electrical connection for heated steering wheel.
ST-8
< SYSTEM DESCRIPTION >
SYSTEM
SYSTEM
STEERING TILT & STEERING TELESCOPIC
STEERING TILT & STEERING TELESCOPIC : System Diagram
INFOID:0000000009177061
STEERING TILT & STEERING TELESCOPIC : System Description
INFOID:0000000009177062
When the operator adjusts the steering column position using the ADP steering switch (tilt/telescopic), the
switch provides a ground signal to the ADP control unit. Power and ground is supplied to the tilt or telescopic
motors to move the column in the desired direction.
HEATED STEERING WHEEL SYSTEM
HEATED STEERING WHEEL SYSTEM : System Diagram
INFOID:0000000009177063
HEATED STEERING WHEEL SYSTEM : System Description
INFOID:0000000009177064
The heated steering wheel switch controls the heated steering relay through the A/C Auto amp. When the
switch is turned on, the relay is energized and the heated steering system will operate. The heated steering
system will turn off when the steering wheel temperature reaches approximately 86
° F (30° C). Heated steer-
ing system operation can also be canceled by pressing the heated steering wheel switch again. If the surface
temperature of the steering wheel is below 68
° F (20° C), the system will heat the steering wheel and cycle off
and on to maintain a temperature above 68
° F (20° C). The indicator light will remain on as long as the system
is on.
ALGIA0155GB
AWGIA0214GB
AUTOMATIC DRIVE POSITIONER CONTROL UNIT
ST-9
< ECU DIAGNOSIS INFORMATION >
C
D
E
F
H
I
J
K
L
M
A
B
ST
N
O
P
ECU DIAGNOSIS INFORMATION
AUTOMATIC DRIVE POSITIONER CONTROL UNIT
List of ECU Reference
INFOID:0000000009177065
ECU
Reference
ADP Control Unit
ST-10
< WIRING DIAGRAM >
STEERING COLUMN
WIRING DIAGRAM
STEERING COLUMN
Wiring Diagram
INFOID:0000000009177066
AAGWA0024GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст