Nissan Pathfinder. Manual — part 758
INSTRUMENT PANEL ASSEMBLY
IP-15
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
Removal and Installation
INFOID:0000000009176440
CAUTION:
• Be careful not to scratch instrument panel pad and other parts.
• Whenever a suitable tool is used, always wrap a cloth around the end of the tool to protect compo-
nents from damage.
• Before servicing, turn ignition switch OFF, disconnect both battery terminals and wait at least three
minutes.
REMOVAL
1. Disconnect the negative and positive battery terminals, then wait at least three minutes. Refer to
2. Remove instrument side finishers (LH/RH) (1) using a suitable
tool.
NOTE:
LH side shown; RH side similar.
3. Remove front kicking plates (LH/RH). Refer to
INT-22, "KICKING PLATE : Removal and Installation -
.
4. Remove front pillar finishers (LH/RH). Refer to
INT-19, "FRONT PILLAR FINISHER : Removal and Instal-
.
5. Remove instrument lower panel LH. Refer to
IP-25, "Removal and Installation"
6. Remove combination switch. Refer to
BCS-81, "Removal and Installation"
7. Remove center console assembly. Refer to
IP-18, "Removal and Installation"
.
8. Remove combination meter. Refer to
MWI-82, "Removal and Installation"
9. Remove audio unit (BASE AUDIO). Refer to
AV-46, "Removal and Installation"
10. Remove AV control unit. Refer to
AV-365, "Removal and Installation"
(MID AUDIO WITHOUT BOSE) or
AV-611, "Removal and Installation"
(PRE-
MIUM AUDIO WITH NAVIGATION).
11. Remove front display unit. Refer to
AV-49, "Removal and Installation"
(BASE AUDIO),
AV-369, "Removal and Installation"
AV-615, "Removal and Installation"
(PREMIUM AUDIO WITH NAVIGATION).
12. Remove glove box assembly. Refer to
IP-26, "Removal and Installation"
13. Remove instrument panel tweeter grilles (LH/RH) and center speaker grille.
1.
Instrument panel assembly
2.
Center speaker grille
3.
Sunload sensor
4.
Instrument panel tweeter grille (LH)
5.
Side defroster grille (LH)
6.
Side ventilator grille (LH)
7.
Instrument side finisher (LH)
8.
Combination meter
9.
Illumination control switch
10. Trip computer switch
11. Cluster lid A
12. Steering column upper cover
13. Steering column upper cover
14. Upper switch carrier
15. Lower switch carrier
16. Fuse block cover
17. Instrument lower panel LH
18. A/C and AV switch assembly (with-
out navigation)
19. A/C and AV switch assembly finisher
(without navigation)
20. Cluster lid C lower
21. A/C and AV switch assembly (with
navigation)
22. Hazard switch
23. Cluster lid C
24. Front passenger air bag off indicator
25. Center ventilator grille (LH)
26. Cluster lid D
27. Center ventilator grille (RH)
28. Glove box lid
29. Glove box
30. Glove box tray
31. Glove box dampener
32. Instrument side finisher (RH)
33. Side ventilator grille (RH)
34. Side defroster grille (RH)
35. Insturment panel tweeter grille (RH) 36. Optical sensor
ALJIA0335ZZ
IP-16
< REMOVAL AND INSTALLATION >
INSTRUMENT PANEL ASSEMBLY
14. Remove instrument panel bolt (A) from the instrument panel
tweeter grille (RH) area.
15. Remove front passenger air bag module. Refer to
SR-18, "Removal and Installation"
16. Remove instrument panel assembly screws.
17. Disconnect the harness connectors from the instrument panel assembly.
18. Disconnect the antenna cable.
19. Remove the instrument panel assembly.
INSTALLATION
Installation is in the reverse order of removal.
• If replacing the instrument panel, transfer all the necessary parts to the new instrument panel.
ALJIA0776ZZ
STEERING COLUMN COVERS
IP-17
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
STEERING COLUMN COVERS
Removal and Installation
INFOID:0000000009176441
REMOVAL
1. Remove instrument lower panel LH. Refer to
IP-25, "Removal and Installation"
2. Remove steering column cover screw finishers (1) using a suit-
able tool, then remove screws.
NOTE:
Rotate steering wheel to access steering column cover screw
finishers (1) and screws (if necessary).
3. Remove steering column upper cover (2).
4. Remove steering column lower cover screw, then remove steer-
ing column lower cover (3).
INSTALLATION
Installation is in the reverse order of removal.
ALJIA0456ZZ
IP-18
< REMOVAL AND INSTALLATION >
CENTER CONSOLE ASSEMBLY
CENTER CONSOLE ASSEMBLY
Exploded View
INFOID:0000000009176442
Removal and Installation
INFOID:0000000009176443
REMOVAL
CAUTION:
Be careful not to scratch center console finishers and other parts.
1.
Drive mode selector switch
2.
Shift selector finisher
3.
Front seat climate control switch
(RH) (if equipped)
4.
Front seat climate control switch
(LH) (if equipped)
5.
Center console switch bracket
6.
Center console assembly
7.
Front console mat
8.
Front console tray
9.
Power socket
10. Center console side finisher (RH) 11. Center console side finisher (LH)
12. Center console brace
13. Center console lower brace
14. Rear center ventilator duct
15. 2nd row heated seat switch (RH)
(if equipped)
16. 2nd row heated seat switch (LH)
(if equipped)
17. Rear auxiliary input jack
18. Center console rear finisher lower
bracket
19. Intelligent Key antenna
20. Center console rear finisher
21. Power socket
22. AC 120V outlet
23. Center console rear finisher upper
bracket
24. Rear blower control
25. Rear center ventilator grille as-
sembly
26. Center console bin
27. Center console bin lid
28. Center console rear brace finsher
AWJIA1155ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст